If you like my movie please subscribe to help me get to 1000 subscribers by the end of 2020. :) th-cam.com/channels/00z64mTWDPqP9tGKZOlILw.html It will help me a lot if you like and share my movie. :) Please watch the other movies that I have made: th-cam.com/video/VVmnxs6gM_M/w-d-xo.html
I normally never comment on youtube. but just thought a Thank you is the least i can do. I was abt to buy a new machine but found your video THANK YOU soo much u saved me money i got the ring from amazon and the leak stopped immediatly even my machine is different than yours a bit 👏🏻 keep up
4 years later, here I am. With the exact same "funny story" trying to pry open the dang thing. Just checked out from amazon. 5,45€ free delivery. Thanks for the tip, Daniel! ;)
I took my machine apart (those tabs without the screws are just that, tabs, you have to pry them up gently) then put it back together (way harder) and I DREAD disassembling again... but this saved me so much headache, thanks for the tip!
Thank you so much!! I rang Dolce Gusto who told me they did not supply new O rings!!! I looked on Amazon and voilà Krups O ring in stock so ordered despite my machine being a De Longhi model Success ...... thank you so so much!! New replacement machine now not required and all thanks to you x
Thank you so much for this video, it really helped me identify the same issue - a leaking gasket. I ordered a new one and now everything is like brand new - no leaks. You saved my coffee machine from going to the trash.
I have my Piccolo since 2014, and just now got this problem. I was about to throw it away, but decide it to fix it and I’ve found your video. Did like you said and now it can continue working for many years! Little fix has helped to solve my problem and avoided me to pollute our land with waste. Thank you so much!😊😊
@@DanielWorkshop thank you. I Thought that, but wasn't sure enough. Hope it will help. The rubber is on his way. They aspect him to get here just before Christmas. Never tried this before.
I am facing the issue today and decided to search the web for a solution. Viola, TH-cam recommended this video. May I know what's the OD and ID of the o-ring?
This is a very useful video!! Thank you for uploading, you have saved my Dolce Gusto from the bin. I ordered an O ring from Amazon for £2.50. It arrives tomorrow so fingers crossed I can go back to my caramel lattes again!!!
@@DanielWorkshop It worked a treat. I replaced the washer exactly how you did in the video. Worked perfectly and we are now back to enjoying our lattes in time for the cold weather. ❤️
I checked my machine I thought the leak was from inside, but after watching your video, I realised I had the same issue as yours. the washer costs £3.40 on ebay so I'll fix it myself. Many thanks for this video it helped a lot
Thanks Daniel! I have the same problem and found your video. I was already on the way to open the whole machine. Due to your experience I just change the gasket. Thank you for this tips.
Thank you so much for this. I ordered a new washer online. HOWEVER after ordering I thought I'd have a look at the old washer. I prised it out and rubbed it to clean off some white deposits. I then rubbed it with some cooking oil to feed the rubber. Voila, the leak stopped. I now have a new spare washer in case I need in future but its been a few days now and it has not leaked a drop.
Thank you so much! Another gasket p/n is 57860. It's also flexible orange rubber. And it holds water tank very tight. Size is 23 x 15 x 5 mm. 👍 Don't forget about special oil for coffee machines.
Hi! I had the same issue last week. After watching your video, I ordered a new rubber seal like yours on eBay... And it's fixed. No more water leaking. 😊 Thanks.
@Kalkitos I cannot find the seal for this machine on eBay. Can you help me with a link? I put an elastic inside the gasket and it is fine for now, but I do believe a new ring would be better in the long run. I would greatly appreciate your help in this matter. Thanks in advance.
He Daniel, thank you so much for your video. I have repaired my Dolce Gusto Circolo in exactly the way you explained, and now it is perfect again. Thanks! Have a nice day!
Original p/n is MS-623712. But as you mentioned this is rubber which looses its flexibility properties after time (ages quickly) and water-stone adds to it. The other is made of different rubber that lasts longer and p/n is MS-0907124
Hello Daniel,I just did it like you explained in your video.after a looking many videos,I decided to take your steps.Thank you for sharing this video,helped very much and saved me for opening whole mashine😃..Thanks a lot and have a nice day!
Thank you a lot, I bought a new water reservoir, got a cheap rubber to replace it and cleaned the high pressure point on top, tested it with a new cup and it doesn't leak anymore and gives me my coffee again thank you so much, I have one of the first dolce gusto ones so it's really old :) but still it works again and still cheaper than a brand new one :)
You are a life saver! Thank you so much, I only had a small one so I inserted the small one at the bottom and the original on top, now it stopped leaking
I bought an orange gasket on EBay for £4.85 including postage and used a very small screwdriver just as this video - it worked and no leaks since. And to think I got very close to spending £80 approx on a new such machine. By the way the Aldi compatible Americans capsules are great value and just as good as branded. Bob
Fixed in under 1 minute! I also just used any general purpose o ring which was far from te exact size (bigger and thinner). This seems to work as well :)
This technique works on the Krupps Oblo as well. I loosened the two screws on either side first but I don't think that made any difference. Super quick to change the seal.
Exactly where I looked for screws 🤓 Good job and you keep the missus happy 😍 Try a little silicon grease on the seal as well, lucky you didn't damage the new seal! In and out 4 times 😩
Thanks for this video. I’m sure it helped hundreds of people. I bought the same orange washer sadly my machine is still leaking Any other ideas how to fix it? Thanks again
The are different orange washers. There are some that are more towards red wich are not fixing the problem. But could be that you have some problems inside the machine. The easiest way to see where the problem is to check the top of the back side where the water tank is. If there is water there you still have problem with the gasket.
Thanks Daniel. Have taken out the washer so easy. Unfortunately I did not take notice which way it was facing with the grooves. Could you help please. Thanks Mel
Hi Daniel.Thank you very much for your demonstration on water leaking.I have that problem .I did open the back cover as the lever was not staying in position and everything I tried to use the machine,I had to hold the lever otherwise it returned to the centre position.I noticed that the lever bar inside had accumulated coffee residue.I cleaned it and problem solve.When I put the machine together I noticed that the water tank was very stiff to put back in place and water leaked.If I change the "0" ring and the rubber sealer on the tank would solve the leak? Hoping to hear from you and thanks again.
Thank you so much, for posting this! I have the exact same problem. I got the old gasket out and am going to check my hardware store for replacement tomorrow( I’m not very good with ordering things online:)
Can you advise where I can get an O ring and what model etc. I am looking for or similar. Searched voilà Krups O ring as a reader commented but so many of them.
Hello Daniel I a m writing from Lebanon you Dolce Gusto made in Indonesia mine is made in China, where can I find spare parts like this o ring ? thank you if you ever answer
Hi Daniel and thanks for the excellent video. I'm going to replace the oring as described. However I have another issue too, the actual water plastic tank has started leaking, as soon as I fill it up, water starts running out of the bottom hole. Any suggestions? Other than holding a finger at the bottom while transporting the tank to the coffee machine, that is... 😉 Thank you!
@@DanielWorkshop thank you for the prompt response, I've tried to stick my hand in there but I can't feel any damage. It's probably just the spring that has lost some of the tension. I've ordered an oring anyway, I hope that can at least contain the leak once the tank has been pushed in place. Cheers!
Great video - every day I come down to find my gusto piccolo Machine has leaved water over the worktop. and is wet under the machine. I have found the orange O ring on ebay uk for £4.85. Is there anyway I can find where the leak is coming from as happy to buy this part but on taking the black one out it looks perfectly fine. If it is a bigger prob than just this O ring, I am not tech minded so would just a buy a new one. Thanks
@@DanielWorkshop thanks Daniel. If you mean does the water tank connect to the actual machine easy, yes it appears to, so guess it is the O Ring. Have ordered now 😁
My O ring looked perfectly fine to me also. However, when you get the new one, it makes total sense. The old one shrunk and is hard. The new one is much softer and fuller. Part number is Krups MS-0907124.
@@DanielWorkshop Thank you.Will let you know when the new o rings arrive in the post if it worked as I have two dolce gusto machines with the same leaking problem.One of them is a Dolce Gusto mini me.The other one an oblo.
@@DanielWorkshop Thank you for uploading this video.The o rings have arrived and have managed to fix both of my machines.It cost £5 per o ring but worth it.
I ordered and fitted a new one from Amazon but it still leaks. I'm wondering whether it's a bad seal or something else? I don't want to order another seal from elsewhere in case it still doesn't fix it.
If you like my movie please subscribe to help me get to 1000 subscribers by the end of 2020. :)
th-cam.com/channels/00z64mTWDPqP9tGKZOlILw.html
It will help me a lot if you like and share my movie. :) Please watch the other movies that I have made: th-cam.com/video/VVmnxs6gM_M/w-d-xo.html
This is still helping people in October 2024 to fix the same issue, thanks so much!
I normally never comment on youtube. but just thought a Thank you is the least i can do. I was abt to buy a new machine but found your video THANK YOU soo much u saved me money i got the ring from amazon and the leak stopped immediatly even my machine is different than yours a bit 👏🏻 keep up
I've just fixed it! I had a spare ring I got from Amazon ages ago and decided to finally fix it. It took me just 30 seconds! Thank you for your video!
Glad I could help!
4 years later, here I am. With the exact same "funny story" trying to pry open the dang thing. Just checked out from amazon. 5,45€ free delivery.
Thanks for the tip, Daniel! ;)
You're welcome.
hi. Can you tell me what is the specs for this o ring? Asking from Malaysia.
Thank you so much for posting this… I’ve just fixed my incontinent machine ⭐️
Thanks for this - I actually only had to clean the o-ring for limescale, and then it did not leak anymore.
Lucky you. :)
It worked ! £4.75 on Amazon with “free” delivery and Bob’s your uncle. You saved me buying another one. Thank you Daniel
You're welcome.🙂
Can I have the link to the o ring on Amazon please?
I took my machine apart (those tabs without the screws are just that, tabs, you have to pry them up gently) then put it back together (way harder) and I DREAD disassembling again... but this saved me so much headache, thanks for the tip!
You are welcome.🙂
Thank you so much!!
I rang Dolce Gusto who told me they did not supply new O rings!!!
I looked on Amazon and voilà Krups O ring in stock so ordered despite my machine being a De Longhi model
Success ...... thank you so so much!!
New replacement machine now not required and all thanks to you x
I am happy for you. I hope you liked my video. 😁
Thank you, you are an angel! I got an o ring for 3.48 euros and it worked perfectly! So happy and thankful for your video
Thank you. I hope that you liked my video too. :)
Thankyou so much for this video ,I thought I had to unscrew take the machine apart and it turns out I didn't .so many thanks again
You are welcome. 🙂
Thank you so much for this video, it really helped me identify the same issue - a leaking gasket. I ordered a new one and now everything is like brand new - no leaks. You saved my coffee machine from going to the trash.
I am glad I could helped you. 🙂
Where did you order the gasket from?
Hi please can you tell me where did you order the gasket from . Thank you
@@patgdgerard9929 hi, just search in google for MS-623712. Delivery is different in each country.
@@Pickleman864 hi, just search in google for MS-623712. Delivery is different in each country.
I have my Piccolo since 2014, and just now got this problem. I was about to throw it away, but decide it to fix it and I’ve found your video. Did like you said and now it can continue working for many years!
Little fix has helped to solve my problem and avoided me to pollute our land with waste.
Thank you so much!😊😊
Thank you for your feedback. I am happy for you. :)
Wich part of the ring has to go under?
The part with the groove is on the bottom.
@@DanielWorkshop thank you. I Thought that, but wasn't sure enough. Hope it will help. The rubber is on his way. They aspect him to get here just before Christmas. Never tried this before.
I am facing the issue today and decided to search the web for a solution. Viola, TH-cam recommended this video. May I know what's the OD and ID of the o-ring?
Thank you so much for this great video! You saved my and my Dolce Gusto's life 😄. I repaired it in 2 Minutes!!! Unbelievable that it can be so easy!
I am happy for you. 🙂
Wow awesome, I didnt need to dismantle, the new washer went in so easily and no leaks, your a star⭐
I am happy that you solved your problem too. 🙂
This is a very useful video!! Thank you for uploading, you have saved my Dolce Gusto from the bin. I ordered an O ring from Amazon for £2.50. It arrives tomorrow so fingers crossed I can go back to my caramel lattes again!!!
Glad I could help!
@@DanielWorkshop It worked a treat. I replaced the washer exactly how you did in the video. Worked perfectly and we are now back to enjoying our lattes in time for the cold weather. ❤️
I am happy for you. 🙂
I checked my machine I thought the leak was from inside, but after watching your video, I realised I had the same issue as yours. the washer costs £3.40 on ebay so I'll fix it myself.
Many thanks for this video it helped a lot
Thanks Daniel!
I have the same problem and found your video. I was already on the way to open the whole machine. Due to your experience I just change the gasket. Thank you for this tips.
You're welcome! :)
Thank you so much for this. I ordered a new washer online. HOWEVER after ordering I thought I'd have a look at the old washer. I prised it out and rubbed it to clean off some white deposits. I then rubbed it with some cooking oil to feed the rubber. Voila, the leak stopped. I now have a new spare washer in case I need in future but its been a few days now and it has not leaked a drop.
That is a good advise.
A 1000 thank you! You saved me from buying my 3. Dolce Gusto...❤
Thank you so much! Another gasket p/n is 57860. It's also flexible orange rubber. And it holds water tank very tight. Size is 23 x 15 x 5 mm. 👍 Don't forget about special oil for coffee machines.
Wish I’d seen your video before I spent a hour fixing my leak!!
At least now you know. :)
thank you for showing me the source of the problem….I just took the ring out and put it back in and the problem was solved
Good for ypu. Maybe there were some dirt on it and it was not properly sealing.
Yes you are right, I just push in, maybe the position is pulled up…
Could be. :)
Hi! I had the same issue last week. After watching your video, I ordered a new rubber seal like yours on eBay... And it's fixed. No more water leaking. 😊 Thanks.
You are welcome. I hope you like the video. 😁
@Kalkitos I cannot find the seal for this machine on eBay. Can you help me with a link? I put an elastic inside the gasket and it is fine for now, but I do believe a new ring would be better in the long run. I would greatly appreciate your help in this matter. Thanks in advance.
He Daniel, thank you so much for your video. I have repaired my Dolce Gusto Circolo in exactly the way you explained, and now it is perfect again. Thanks! Have a nice day!
I am happy for you. :)
Original p/n is MS-623712. But as you mentioned this is rubber which looses its flexibility properties after time (ages quickly) and water-stone adds to it. The other is made of different rubber that lasts longer and p/n is MS-0907124
Thank you for info. :)
Hello Daniel,I just did it like you explained in your video.after a looking many videos,I decided to take your steps.Thank you for sharing this video,helped very much and saved me for opening whole mashine😃..Thanks a lot and have a nice day!
You're welcome. :)
Thank you a lot, I bought a new water reservoir, got a cheap rubber to replace it and cleaned the high pressure point on top, tested it with a new cup and it doesn't leak anymore and gives me my coffee again thank you so much, I have one of the first dolce gusto ones so it's really old :) but still it works again and still cheaper than a brand new one :)
Excellent!
You are a life saver! Thank you so much, I only had a small one so I inserted the small one at the bottom and the original on top, now it stopped leaking
Glad I could help!
I bought an orange gasket on EBay for £4.85 including postage and used a very small screwdriver just as this video - it worked and no leaks since. And to think I got very close to spending £80 approx on a new such machine. By the way the Aldi compatible Americans capsules are great value and just as good as branded. Bob
I am very happy this video helped you, and I hope that at least you liked my video. :)
I think Aldi pods and lidl are tastier and far cheaper.
Thanks man, life saver. Didn't have to buy a new machine!
Glad I could help!
you, my friend, are a genius, thanks and God Bless You, from Malta
Thank you. 🙂
Fixed in under 1 minute! I also just used any general purpose o ring which was far from te exact size (bigger and thinner). This seems to work as well :)
Nice work!
It really works! I thought I might have to replace the whole water supply thingy but this was so much easier and faster. Thank you!
Glad it helped!
Where did you buy it?
Thx to your advice I was able to repair my Dolce Gusto by replacing the rubber exact like you showed. THANKS !
You're welcome. I hope you pressed the like button. 😁
This technique works on the Krupps Oblo as well. I loosened the two screws on either side first but I don't think that made any difference. Super quick to change the seal.
It works on all Krups Dolce Gusto models.
Exactly where I looked for screws 🤓 Good job and you keep the missus happy 😍 Try a little silicon grease on the seal as well, lucky you didn't damage the new seal! In and out 4 times 😩
Thank you for whatching my video and for your message. :)
Thanks for this video. I’m sure it helped hundreds of people. I bought the same orange washer sadly my machine is still leaking
Any other ideas how to fix it?
Thanks again
The are different orange washers. There are some that are more towards red wich are not fixing the problem. But could be that you have some problems inside the machine. The easiest way to see where the problem is to check the top of the back side where the water tank is. If there is water there you still have problem with the gasket.
Thanks Daniel. Have taken out the washer so easy. Unfortunately I did not take notice which way it was facing with the grooves. Could you help please.
Thanks Mel
Hi Mel. Grooves should be down. :)
I had suicidal thoughts after noticing that my beloved genio 2 was leaking from the bottom. Now you saved me thanks so much.
You're welcome. :)
Thank you Daniel - great video. New seal bought and fitted and leak fixed- took 30 seconds 👍
Very happy that it helped you. 🤗
what a little legend you are for doing this Daniel! also love the humour! fixed my issue thanks!
I am glad you enjoyed my video and also that fixed you machine. :)
Thank you. We are sorted now yippee coffee time.
Brilliant, part arrived next day from Amazon and fitted in less than a minute. 🖖
I am happy you manage to fix it. :)
Hi Daniel.Thank you very much for your demonstration on water leaking.I have that problem .I did open the back cover as the lever was not staying in position and everything I tried to use the machine,I had to hold the lever otherwise it returned to the centre position.I noticed that the lever bar inside had accumulated coffee residue.I cleaned it and problem solve.When I put the machine together I noticed that the water tank was very stiff to put back in place and water leaked.If I change the "0" ring and the rubber sealer on the tank would solve the leak? Hoping to hear from you and thanks again.
Hello. It is not easy to say whether it will fix it or not, but the oring is cheap and you can try it.
@@DanielWorkshop OK thanks for your help.much appreciated.
I was wondering the same too on how do I stop the water from over filling coffee in my mug
Thank you so much, for posting this! I have the exact same problem. I got the old gasket out and am going to check my hardware store for replacement tomorrow( I’m not very good with ordering things online:)
Glad it helped
Dead simple!! It worked with me. Thank you for saving me an hour. Vincent
I'm happy it helped you. I hope you can give me a like. :)
Thank you for this very informative video, just what I need. Regards Peter and Dina
Hi,thank you for your video,i have the same problem.
Can you tell me where you are bought the gasket?
Hi Akon. I bought it from ebay. I buy them in bulk 50 pcs so it would be pointless to give you the link. Just search tank gasket dolce gusto on ebay.
Thanks bro for this smart fix, cool story 😂
You're welcome. 😀
Nice story Daniel. Aiy yai yai. Well done 👍
Thank you. :)
Gonna try this today thanks ♥️
Veru useful video mate. Thanks for sharing and saving the rest valuable time!
My pleasure!
This helped me so much!
Thank you for your video😃
You're welcome. 🙂
I had the exact same problem and managed to fix it the same way! Thanks so much!!
You're welcome! I hoped you liked the movie and subscribed (at least). :)
Hi. Is there a link where I can buy this? Or a model number of the O Ring?
Can you advise where I can get an O ring and what model etc. I am looking for or similar. Searched voilà Krups O ring as a reader commented but so many of them.
There was a comment from someone with a link to the exact part number.
Daniel please put a link from where we can buy the gasket. Thanks
I buy them 50 a time so my link will not help you. There was in one of the comments a link for one.
Excellent, many thanks, Followed your instructions, very easy!!
You're welcome.
Hi everybody! Hi Dr. Nick!
Thanks for making this video. You saved me a lot of work. I was able to fix mine within 1 minute :)
Glad it helped!
Hi Danial, Can you tell me where can I get this seal replacement please?
Thank you very much, so genial, bravo......you are the best....
Thank you. :)
Hi Daniele thanks for sharing the video where did you buy the O ring from ?
Hello. I bought if of ebay, but in one of the comments someone left a link to an amazone store who sell it too.
This was terrifically helpful; thx!!
You are welcome.🙂
Hello Daniel
I a m writing from Lebanon
you Dolce Gusto made in Indonesia mine is made in China, where can I find spare parts like this o ring ?
thank you if you ever answer
Hello. I bought it from ebay.
Thank you for the video for me I took the back off before I watched your video like me my wife was gonna throw away and buy new one.
You're welcome. 😀
Hi Daniel and thanks for the excellent video. I'm going to replace the oring as described. However I have another issue too, the actual water plastic tank has started leaking, as soon as I fill it up, water starts running out of the bottom hole. Any suggestions? Other than holding a finger at the bottom while transporting the tank to the coffee machine, that is... 😉 Thank you!
There is a gasket inside the tank and it is pushed up and down by a spring. You can check if that gasket is stuck or the spring is working or not.
@@DanielWorkshop thank you for the prompt response, I've tried to stick my hand in there but I can't feel any damage. It's probably just the spring that has lost some of the tension. I've ordered an oring anyway, I hope that can at least contain the leak once the tank has been pushed in place. Cheers!
Thank you for your videos, just repaired our old dulce gusto following one of your other videos.
Thank you for your feedback. I am happy it helped you. :)
Thank you that was brilliant
Thanks much! You saved me an hour :)
You're welcome. Please don"t forget to like me video. 😁
I am curious if it worked for your machine too. :)
It worked for me. :)
Where did you buy the O ring please?, thanks for the video. I subbed :D
@@karleetoss1713 I bought it from ebay from Germany.
Can you share a link from the ebay for a gasket. please
@@anteursic9904 I have searched it, but I can't find it anymore.
Great video - every day I come down to find my gusto piccolo Machine has leaved water over the worktop. and is wet under the machine. I have found the orange O ring on ebay uk for £4.85. Is there anyway I can find where the leak is coming from as happy to buy this part but on taking the black one out it looks perfectly fine. If it is a bigger prob than just this O ring, I am not tech minded so would just a buy a new one. Thanks
To be honest 5 pounds is not such a big deal. What you can check if the water reservoir goes down easy than the problem is the o ring.
@@DanielWorkshop thanks Daniel. If you mean does the water tank connect to the actual machine easy, yes it appears to, so guess it is the O Ring. Have ordered now 😁
Let me know when the o ring comes if it worked.😊
My O ring looked perfectly fine to me also. However, when you get the new one, it makes total sense. The old one shrunk and is hard. The new one is much softer and fuller. Part number is Krups MS-0907124.
Thanks for info. Just waiting on delivery. Will post update once it arrives
Thank you a lot! Perfect video, everything is clear, how to do .
Glad you liked it!
Great tip!!
Glad it was helpful!
Thank you
You're welcome :).
where to get the o rings? any links?
You can find a link in some of the comments. I buy them in bulk 100 so to give the link will not help you.
Where do I buy that o ring
You are adorable and extremely helpful!!
Glad it was helpful!
And I totally fixed my machine!
@@klottese Yuppppiii. :)
You my man are amazing. Thank you so much - sorted.
Thank you. I hope you press like on my video. 😁
I got the o ring out but when I put the new one in is it the flat side facing up or the groove side facing up ?
Flat side up.
@@DanielWorkshop Thank you.Will let you know when the new o rings arrive in the post if it worked as I have two dolce gusto machines with the same leaking problem.One of them is a Dolce Gusto mini me.The other one an oblo.
Please do. :)
@@DanielWorkshop Thank you for uploading this video.The o rings have arrived and have managed to fix both of my machines.It cost £5 per o ring but worth it.
I am happy that it helped you. :)
Thanks for making the clip, may I ask where did you get the o ring and do you know the diameter of that o ring? Thanks
Hi Eason, I got the o ring from ebay. The exterior diameter is 23.5 mm and the inside is 16 mm. I hope it helps you. :)
@@DanielWorkshop Hi! What is the thickness of the ring? I found from 1.5mm to 5.5mm online. Thank you for the video :)
It is about 3 mm but what I bought is dedicated to the unit so it should not be with different thickness.
@@fahimakhatun8393 I boght it almost a year ago from ebay. I don't have the link anymore.
@@DanielWorkshop no worries thank you, can you tell me the name of the ring please as I can't find it when I type o ring.
Gdzie kupić nową uszczelkę:S
Where do you get the rubber o rings
I bought it some time ago from ebay.
Thank you so much .. my rubber still good just a bit white from water chemical
Glad it helped
to be honest that was easy lol great video
Thank you. :)
@@DanielWorkshop You welcome
link to buying the washer please!
There was a mention in the other comments for the washer. I am ordering them in bulk (100).
where did you buy the o ring?
Ebay, but I buy them in bulk as I resell them in Romania. :)
Where can I purchase a replacement ring
There were some links in the comments. i buy them in bulk (100) so it would be pointless to give you the link.
Whr can I buy this silicone ring?
There are a few links in some of the comments.
can you add a link to buy the gasket
I buy them in bulk from ebay. 50 pcs at a time so the link will not work for you. :)
Try to search ebay.
where can i find the replacement rubber ring?
I am buying them in bulk (100) from ebay, but if you llok trough the comments you will find a link to amazon site too.
I ordered and fitted a new one from Amazon but it still leaks. I'm wondering whether it's a bad seal or something else? I don't want to order another seal from elsewhere in case it still doesn't fix it.
Could be that is not in the right pisition or there is some other problem with the unit.
My dolce gusto doesn't turn on/off with single press. I have to press the button multiple times to turn it of or on. Help appreciated
You should try to check the fuse.
This video is lifechanging! :) Thank you very much!
I am happy that you like it.
i have leakage in tank in which we fill water, can you share how to fix it
Sorry I don't know.
Does anybody have the link to the silicone ring?
are you saying that we shouldnt bother opening it up and just change the gasket first?
You can try it. It only takes you minutes, and if it is workig it will save you hours and a lot of cursing. 😂