Getting a new diffuser plate is costly here so I used a small O-ring and voila, the leak was fixed!! It did work! I paid only $0.15 USD for the O-ring. Thanks much!!
Thank you for the advice. Just cleaned the plate and works like new. Was a little tricky cause I have the kp 270 and the handle come down at front of the hole. But works nice.🙏🙏👍👍🤩🤩
Muchas gracias por compartir ese vídeo. Soy de Brasil y por acá la placa difusora es muy cara. Este video trae una solución muy inteligente y tú didática es muy buena. Será que no rompe la máquina? Espero por más vídeos con subtitulos en portugués. Jeje muchas gracias amigos. Thank you
Amigo Brasileiro kkkk Cara sou do interior de São Paulo. Comprei uma maquina dessa usada por 180. A mini me . Cheguei em casa para testar e saia água pra todo lado. Fiquei triste. Achei esse vídeo e tinha por acaso um oring desse tamanho. O último para falar a verdade. Coloquei e parou de vazar. Kkkkk Se queima a máquina eu não sei. Mas funcionou. Abraço.
@@shiraga89 Fica tranquilo. Isso se deve pela placa difusora. Custa 50 reais e você mesmo troca. Muito fácil. A minha estava assim como a sua e ficou como nova.
I feel stupid for asking this. I picked up 2 O rings today. One go them is too small to fit around it. The next size up fits around it tight but then won't fit back into the machine. It's as if it's too fix to fit back inside. It says its a 5.8mm and 1.9mm thick. When I take that off, the diffuser plate fits back in fine but then it leaks. Any ideas? 😔🙏
Hi there, my machine is still leaking water at the capsule holder, even though we had already replaced with a new injection plate. We had also done descaling on the machine. Any other possible reason for the leak?
Could you please make a video on how to fix stuck capsule holder with reusable capsule in it? (I can only turn my coffee machine on by importing and exporting capsule holder).
www.amazon.co.uk/Injector-MS-622718-Compatible-Krups-Creativa/dp/B074J8685L/ref=sr_1_10?dchild=1&keywords=melody+3+machine&qid=1621359622&sr=8-10 For example.. :D
I've tried all your solutions in your other videos, and it still just makes a buzzing noise and does not produce any water/coffee. I assume it's just broken at this point?
@@benassy69 yeah i just did....it was fine in the beggining ive used it about 5 times then it started doing that...I will try it later and see how it works...thanks for help.
8mm o-ring you say, is that "inside or outside" diameter of the o-ring? Here in the U.S. 5/16 inch inside diameter would be .3125. Would that work? Thanks Ricardo
![เป็นไปได้ไหม - WanMai [Performance Video]](http://i.ytimg.com/vi/Eh5hItD4Mr0/mqdefault.jpg)
Thank you Adrian, we need more technicians like you..
Getting a new diffuser plate is costly here so I used a small O-ring and voila, the leak was fixed!! It did work! I paid only $0.15 USD for the O-ring. Thanks much!!
It worked, for future reference I used 6x1 o-ring. Thank You very much !!!
Tip: when you insert the diffusor plate pull down the capsule holder cover. It will be handy while puting it back in. Thank you for the help Adrian :)
Very helpful! Instead of an oring you can use teflon tape and it works just as well!
La mejor solución en la cinta de teflón gracias a tu comentario tengo la dolce gusto arreglada😊👍
I work perfectly. Quick and economical solution. Very good video. Thanks a lot. Greetings from Argentina.
And.........It works!!!!! You are the BEST! Thanks 🌟
Glad this was helpful!
Você me ajudou muito. Eu agradeço do fundo do coração. Deus te abençoe. Um abraço do Brasil.
Sabe onde comprar essa borracha?
@@regianelacerda4761, essa borracha, se chama oring. Vende-se ,em casas de parafusos e ferramentas! Ela é bem pequena!
Thank you very much. Change of diffuser plate worked perfectly. Thank you for instructions. Gladly subscribed for your channel.
Thank you for the advice. Just cleaned the plate and works like new. Was a little tricky cause I have the kp 270 and the handle come down at front of the hole. But works nice.🙏🙏👍👍🤩🤩
Muchas gracias por compartir ese vídeo. Soy de Brasil y por acá la placa difusora es muy cara. Este video trae una solución muy inteligente y tú didática es muy buena. Será que no rompe la máquina?
Espero por más vídeos con subtitulos en portugués. Jeje muchas gracias amigos. Thank you
Amigo Brasileiro kkkk Cara sou do interior de São Paulo. Comprei uma maquina dessa usada por 180. A mini me . Cheguei em casa para testar e saia água pra todo lado. Fiquei triste. Achei esse vídeo e tinha por acaso um oring desse tamanho. O último para falar a verdade. Coloquei e parou de vazar. Kkkkk Se queima a máquina eu não sei. Mas funcionou. Abraço.
@@shiraga89 Fica tranquilo. Isso se deve pela placa difusora. Custa 50 reais e você mesmo troca. Muito fácil. A minha estava assim como a sua e ficou como nova.
@@shiraga89 outra dica. Não repita o que esse cara do video ensina pois por esse motivo tive que abrir minha dolce gusto.
@@shiraga89 na mesma saga kkkkk. minha foi ainda pior pq funcionou bem e vazou somente depois
@@surfingwear sério? A minha esta funcionando com o oring lá a 7 meses! Kkk Vi seu comentário só agora!
I fixed it it was
Very easy ,thanks for the video😊
It worked, wow. Thanks for the tip!!
oring 6,7,8mm use.. but still leak... just new replacement is sucess?
You are the best man
Thank you very much! Fixed my problem!
My machine has started to leaking after descaling process. Tomorrow morning I will try your solution.
I feel stupid for asking this.
I picked up 2 O rings today. One go them is too small to fit around it. The next size up fits around it tight but then won't fit back into the machine. It's as if it's too fix to fit back inside. It says its a 5.8mm and 1.9mm thick.
When I take that off, the diffuser plate fits back in fine but then it leaks.
Any ideas? 😔🙏
What is the exact spec ? OD 8mm ID? Thickness?
Hi there, my machine is still leaking water at the capsule holder, even though we had already replaced with a new injection plate. We had also done descaling on the machine. Any other possible reason for the leak?
Mine was New but leaking, try Seal it with o ring nevertheless
Could you please make a video on how to fix stuck capsule holder with reusable capsule in it? (I can only turn my coffee machine on by importing and exporting capsule holder).
yes..I will consider it.
work perfectly
Hi, i found very hard to put it back on after i use the o ring? Any suggestion? I m afraid breakjng the top machine head .
If it does not fit back in easily don't force it. You might bend the retainer clip. I have a video on my channel addressing this issue also.
Thank you very much!
benim makinemin tankini takinca tankin altindan suyu akiyor 😢nasil tamir edebilirim teşekkürler
Very good video!!
Do you sell difuser plate?
Where can i order diffuser plate?
www.amazon.co.uk/Injector-MS-622718-Compatible-Krups-Creativa/dp/B074J8685L/ref=sr_1_10?dchild=1&keywords=melody+3+machine&qid=1621359622&sr=8-10
For example.. :D
My machine is leaking from here is this also the defuser so changing it will fix the problem
Thanks in advance
Yes. Try first inserting the niddle method, before changing the diffuser.
@@benassy69 Thanks 😊 can you plz put the item number to order new diffuser
Thanks in advance ☺
MS-622718
@@benassy69 Thanks again ,very helpful videos
thank you very muc
I've tried all your solutions in your other videos, and it still just makes a buzzing noise and does not produce any water/coffee. I assume it's just broken at this point?
Yes... You may need a new pump.
Mine works with cold water and not with hot water...
Can't get the round bit back in now 🙄
Hi. I have a video showing how to remove and install the rotund part!
Adrian... you laike .
my dolce gusto is the new one and its already doing this...what can it be???
Hi. Try removing the diffuser and refit it again. Maybe it not fitted correctly. I have a video on my channel showing how to do this.
@@benassy69 yeah i just did....it was fine in the beggining ive used it about 5 times then it started doing that...I will try it later and see how it works...thanks for help.
8mm o-ring you say, is that "inside or outside" diameter of the o-ring?
Here in the U.S. 5/16 inch inside diameter would be .3125. Would that work? Thanks Ricardo
8 mm outside. The one you proposed might work.
@@benassy69 Thanks!!
Teflon worked