Glad it holds the CO2. You got 11 joule and that is very good from these pistols. Body warm may not be enough for a rise in velocity, but maybe heating the magazine with a hairdryer or similar would🤔? Great video as always Sean. Keep up the good work 😃
I have left my quick pierce magazines for a few months. One for one month and one for two months. No leaks. However, when I first started testing this marker I thought the tighter you tightened the CO2 the canister the better chance of it piercing in time of need. But I found out that you should only snug it up. I left one tightened a bit more than snug come to find out it had pierced it and sat for 3 weeks. Was outside and dryfired it without slapping the bottom. When dryfired it shot a projectile. Always treat any less lethal like it's charged and loaded. 🤟😎👍 Much love Lesslethal Fam!
I also found if you tighten the QC too tight you are stuck empty the entire co2 because you cannot spin the wheel to loosen it unless you use a screwdriver or something.
I want it just because. But I think I should finish my next build first. Did a few tests the other day and I forgot how much I love the smaller power houses that I have. Had a few losses in the family recently along with some other personal stuff but I will be trying out a few videos very soon God Willing... 😎🙏
I have the t4e vp9 and I leave my punctured for a while and usually carry it with pepper balls as a non lethal deterant and It holds air for forever. theyre great, Id love to get a little more power out of it, I have an extra mag with a busted o ring somewhere, ill probably patch that one up and see if I can figure something out.
I knew you could squeak some good power from that Glock nice job! I wear my Byrna in a belly band sometimes when running errands and after returning tested the “body heat” with a infrared thermometer and usually gets around 85 degrees and a gain of roughly 20 fps, unfortunately C02 is so flippy floppy with consistency.
Kept a pierced co2 in the mag for over a year and half, unfortunately had the use the launcher in a self defense situation and it worked flawlessly. Unmodified reliability means more than an increase of 1-2 joules
@@lesslethalfordummies Wenn man das Magazin heraus nimmt und den oberen Teil vom unterem trennt. In dem man die zwei kolben raus hämmert. Wo der anstich ist, dahinter befindet sich ein sehr feines Sieb. Wenn man mit einer feinen Nadel einen Stich rein macht. Ändert das was an den Joule? Weil da kommt ja die Luft durch.
@RaytheReviewer This marker and the way it functions with the blowback features and the magazine being where the propoltion comes from you can only go so high. And i know that Sean will find that sweet spot. You cant just throw a huge tank or 1100psi and it will get more power. "This is not the average bear Yogi!"
These launchers will do best with co2 and the small air chambers. I have seen some run 1100psi through with lack luster results. Hpa is just not volatile enough.
Glad it holds the CO2. You got 11 joule and that is very good from these pistols. Body warm may not be enough for a rise in velocity, but maybe heating the magazine with a hairdryer or similar would🤔? Great video as always Sean. Keep up the good work 😃
I found my laser thermometer so i may just try that hot water test again but more precisely 😁
@@lesslethalfordummies Looking forward to your testing 😃👍. Just be careful so you dont blow any seals🙏👍💥
I have left my quick pierce magazines for a few months. One for one month and one for two months. No leaks. However, when I first started testing this marker I thought the tighter you tightened the CO2 the canister the better chance of it piercing in time of need. But I found out that you should only snug it up. I left one tightened a bit more than snug come to find out it had pierced it and sat for 3 weeks. Was outside and dryfired it without slapping the bottom. When dryfired it shot a projectile. Always treat any less lethal like it's charged and loaded. 🤟😎👍 Much love Lesslethal Fam!
I also found if you tighten the QC too tight you are stuck empty the entire co2 because you cannot spin the wheel to loosen it unless you use a screwdriver or something.
@@lesslethalfordummies This is true! Have you saw the carbine kit for it?
Yes the are some cool Roni kits that may help a longer barrel at least look the part.
I want it just because. But I think I should finish my next build first. Did a few tests the other day and I forgot how much I love the smaller power houses that I have. Had a few losses in the family recently along with some other personal stuff but I will be trying out a few videos very soon God Willing... 😎🙏
That good Sean 11j and held the air 💯
They're for training and just not designed for what we want out of them.
Says it right on the package 😀
11joues that thing got sum hoootspah 💪🏼💯💥💥💥💥 see how long they can hold id say 3months
I have the t4e vp9 and I leave my punctured for a while and usually carry it with pepper balls as a non lethal deterant and It holds air for forever. theyre great, Id love to get a little more power out of it, I have an extra mag with a busted o ring somewhere, ill probably patch that one up and see if I can figure something out.
Good feedback on the mags. It seems the seal is very robust. If you have a spare mag give it a shot 🙂
I knew you could squeak some good power from that Glock nice job! I wear my Byrna in a belly band sometimes when running errands and after returning tested the “body heat” with a infrared thermometer and usually gets around 85 degrees and a gain of roughly 20 fps, unfortunately C02 is so flippy floppy with consistency.
Sounds about right. 85 you say?
Kept a pierced co2 in the mag for over a year and half, unfortunately had the use the launcher in a self defense situation and it worked flawlessly. Unmodified reliability means more than an increase of 1-2 joules
Good to know. Some of you guys are lucky and live in warmer climates and pre piercing will surely help a little with velocity.
HALLO. Was hast du genau gemacht?
Left it punctured over night.
@@lesslethalfordummies Wenn man das Magazin heraus nimmt und den oberen Teil vom unterem trennt. In dem man die zwei kolben raus hämmert. Wo der anstich ist, dahinter befindet sich ein sehr feines Sieb. Wenn man mit einer feinen Nadel einen Stich rein macht. Ändert das was an den Joule? Weil da kommt ja die Luft durch.
@@lesslethalfordummies Meinst das ich die CO2 Kartusche über Nacht angestochen lassen soll?Oder warm halten?
Thanks bro I definitely know I won’t buy one 😂
@RaytheReviewer This marker and the way it functions with the blowback features and the magazine being where the propoltion comes from you can only go so high. And i know that Sean will find that sweet spot. You cant just throw a huge tank or 1100psi and it will get more power. "This is not the average bear Yogi!"
Its a shame it didnt have even a small increase, but there's only so much it can do. We know youll eventually find that sweet spot 😅
I think if i had of been able to actually transfer some body heat there would have been a small increase. Ill try it under the tap next.
what would remedy this is a co2 or hpa cartridge that is running at higher than 800psi..then you could get accepable power out of these .43 cals..
These launchers will do best with co2 and the small air chambers. I have seen some run 1100psi through with lack luster results. Hpa is just not volatile enough.
Truly not enough power 😂💥💥💥💥
Oh i am not finished yet 😈
@@lesslethalfordummies ok !!! I’ll be tuning in bro you always teach me something
@@lesslethalfordummies I am seriously counting on it bro! My PPQ is collecting dust on the shelf.