I'm about to do the same thing with a radio flyer 90 minus the flame job which I absolutely love. I'm actually doing it as a project for my neighbor for his grandson or I would definitely put flames on it or some custom touch! Great job
Damn I didn’t know that. I actually have flames planned for another little paint project. I may let you trace em on. Mine came out decent but could have been better.
What did you use for spacers on the wheels? I heard Lowe’s, but not much detail. I’m replacing my wheels, so I need to know what to get so the wheels fit. Thank you!
I’m sorry I don’t remember. But I could only find them at lowes. Home Depot did not carry them. I just measured the diameter of the axle and the inner diameter of the wheel and that’s what I used to find the spacer I needed.
Not much...I see them all the time for not much more than I paid for our son's wagon. Im getting ready to restore it. I use it for my garden & grocery gett'r.
Late comment but I am about to start the same thing with my childhood wagon for my daughter. Where did you get the decal and what kind of paint did you use, if I might ask. Super job!
Hi! I’m currently restoring an old wagon my dad found at a garage sale. I’m about ready to paint the wagon. I’m using Rustoleum Gloss Regal Red. I’m going to need to seal the decals as you did. Do you know of a clear coat that is compatible with the Rustoleum? All I see are horror stories from people applying clear coat to it.
Any 2K clear is fine. Use the clear I showed in the video or Eastwood makes a rattle can version as well. Just don’t use any single stage clear. It must have a hardener mixed.
www.lowes.com/pd/Hillman-1-2-in-x-5-8-in-Plain-Steel-Standard-SAE-Flat-Washer/3012480. Here’s what I used. I can’t remember the exact diameter so just make sure you get the right size. But I got them at Lowe’s.
Hello guys. I need a very low wagon to carry my three legged miniature Schnauzer who recently had her front left leg amputated after a pibull attack. It's very difficult for her to hop for even relatively short distances because she's also 14 years old. On the other hand, I am 71 years old and recently had an emergency surgery for a ventral hernia that makes it difficult to load and unload my dog on and off the wagon. I was wondering if you have any ideas you could share with me. Thank you
Can you tell me what spacers you used? I’m having the same issue with the harbor freight wheels, I need to space them but can’t find anything that fits
www.lowes.com/pd/Hillman-1-2-in-x-5-8-in-Plain-Steel-Standard-SAE-Flat-Washer/3012480. Here’s what I used. I can’t remember the exact diameter so just make sure you get the right size. But I got them at Lowe’s.
I don’t remember the exact size I had to get but this is what it is. I got them at lowes. www.lowes.com/pd/Hillman-3-8-in-x-1-2-in-x-1-in-Seamless-Steel-Spacer/3012477?cm_mmc=shp-_-c-_-prd-_-hdw-_-ggl-_-LIA_HDW_126_Fastening-_-3012477-_-0-_-0-_-0&ds_rl=1286981&gbraid=0AAAAAD2B2W-9FZ1Oj6FYZ9h1oDnM9zhwZ&gclid=EAIaIQobChMI8ZmMi5ui9AIVp21vBB0U3A3HEAQYASABEgJmkfD_BwE&gclsrc=aw.ds
I’m 51 years old and I’m jealous of your sons wagon ! 😂
Super Awesome job man !
I'm about to do the same thing with a radio flyer 90 minus the flame job which I absolutely love. I'm actually doing it as a project for my neighbor for his grandson or I would definitely put flames on it or some custom touch! Great job
Appreciate the comment. Good luck with restoration!
Radio Flyers rock. Good resto job! Thank you for sharing.
Helen told me to watch this. Looks awesome!
Nice job good dad fixing up for the boy hats off
Hell of a job brotha. Wish me luck I'm restoring my radio flyer as well. My favorite color is blue n black so u know I'm gon change color scheme.
Nice! This was a lot of work but so much fun and came out awesome!
You solved my hub being to big issue. Thank you.
Such a good daddy!
Very nice job
Turned out great .You know you boy is a beast at drawing flames right??
Damn I didn’t know that. I actually have flames planned for another little paint project. I may let you trace em on. Mine came out decent but could have been better.
Great work ! Could you please post where to buy the liner ? Thank you
PlazMask Pre-Taped Masking Film, 12-Feet X 65-Feet a.co/d/6jWzXbs
What did you use for spacers on the wheels? I heard Lowe’s, but not much detail. I’m replacing my wheels, so I need to know what to get so the wheels fit.
Thank you!
What size size bolts did you use to put everything back together? When I took mine apart they were so rusty they broke.
@@fvkyxu I honestly don’t remember. I just went to Home Depot or Lowe’s and bought a set of bolts that fit through the holes
@@JordanMoree I looked on the radio flyer website and found the hardware set which I believe is the right bolts
Great video, for the wheels what spacers did you use? I have the same issue since I bought the harbor freight wheels.
I’m sorry I don’t remember. But I could only find them at lowes. Home Depot did not carry them. I just measured the diameter of the axle and the inner diameter of the wheel and that’s what I used to find the spacer I needed.
Are the old radio flyers wagons worth anything for an old one???
Not much...I see them all the time for not much more than I paid for our son's wagon. Im getting ready to restore it. I use it for my garden & grocery gett'r.
Late comment but I am about to start the same thing with my childhood wagon for my daughter.
Where did you get the decal and what kind of paint did you use, if I might ask.
Super job!
Decal bought eBay. Paint was just generic rustoleum rattle can. Clear was the 2k rattle cans. You can get them from Eastwood or Amazon.
Hi!
I’m currently restoring an old wagon my dad found at a garage sale. I’m about ready to paint the wagon. I’m using Rustoleum Gloss Regal Red. I’m going to need to seal the decals as you did. Do you know of a clear coat that is compatible with the Rustoleum? All I see are horror stories from people applying clear coat to it.
Any 2K clear is fine. Use the clear I showed in the video or Eastwood makes a rattle can version as well. Just don’t use any single stage clear. It must have a hardener mixed.
Thank you so much!
By the way, your restore job on your wagon is awesome!
@JordanMoree how many cans of spray paint should I expect to buy to paint a red wagon pink for my little girl?
I’m pretty sure I only used 2 cans of each. 2 cans of primer, 2 cans of color, and 2 cans of clear.
really nice
What kind of axles spacers do I ask for to put the harbor freight wheels on
Thank you
www.lowes.com/pd/Hillman-1-2-in-x-5-8-in-Plain-Steel-Standard-SAE-Flat-Washer/3012480.
Here’s what I used. I can’t remember the exact diameter so just make sure you get the right size. But I got them at Lowe’s.
Would like to see exactly how you did the wheels.
I have the same wheels from HF and the 4 bolts on each wheel allow you split the wheel from the tire for easy access so you can re-paint
Hello guys. I need a very low wagon to carry my three legged miniature Schnauzer who recently had her front left leg amputated after a pibull attack. It's very difficult for her to hop for even relatively short distances because she's also 14 years old. On the other hand, I am 71 years old and recently had an emergency surgery for a ventral hernia that makes it difficult to load and unload my dog on and off the wagon. I was wondering if you have any ideas you could share with me. Thank you
Can you tell me what spacers you used? I’m having the same issue with the harbor freight wheels, I need to space them but can’t find anything that fits
www.lowes.com/pd/Hillman-1-2-in-x-5-8-in-Plain-Steel-Standard-SAE-Flat-Washer/3012480.
Here’s what I used. I can’t remember the exact diameter so just make sure you get the right size. But I got them at Lowe’s.
Thank you much appreciated
You said the wheels didn’t fit as the axle was to small, so you bought what exactly? A sleeve spacer? What size?
I don’t remember the exact size I had to get but this is what it is. I got them at lowes.
www.lowes.com/pd/Hillman-3-8-in-x-1-2-in-x-1-in-Seamless-Steel-Spacer/3012477?cm_mmc=shp-_-c-_-prd-_-hdw-_-ggl-_-LIA_HDW_126_Fastening-_-3012477-_-0-_-0-_-0&ds_rl=1286981&gbraid=0AAAAAD2B2W-9FZ1Oj6FYZ9h1oDnM9zhwZ&gclid=EAIaIQobChMI8ZmMi5ui9AIVp21vBB0U3A3HEAQYASABEgJmkfD_BwE&gclsrc=aw.ds
@@JordanMoree great. Thanks.
Wow, great job!
Are you selling this wagon by any chance ?
cool👍👍👍
HUGE missed opportunity for a custom Hot-Rodio Flyer decal
Where can you get custom decals?
@@KASH4069 Etsy.
I am restoring 2 one paint came off the other one was all pitted and nasty
Where’d you get your decals ?
eBay
I have my Pink and White for breast cancer I need a white wheel