Just something to ponder: I’m 70 years old and have had Parkinson’s Disease for 9 years. More recent research has concluded that exposure to chemicals, solvents, weed killer and household cleaners might make one susceptible to this disease. I am a huge advocate for the use of heavy-duty gloves and an appropriate respirator when cleaning firearms. I cleaned guns for years and bathed in Hopppes and other gun solvents. You have been warned. Also - great video and thanks for taking the time to share your knowledge. I have a Shockwave and this is truly helpful. Jim
Taking it apart was hard to follow but heck and life it's always easy to take stuff apart it's putting that together that's hard and you explain that perfectly thank you
It was evident that the person was well schooled in taking it apart, and putting it back together. Would have been great if the video was in slo motion for first time cleaners until they become skilled at doing this. Always a challenge when totally disassembling.
It doesn’t get much easier than a Glock take it out of battery pull the tabs on the side and pull the slide off then pop out the spring and barrel clean lubricate and put back together takes 10 mins max
I wonder if there are anybody else on youtube that knows how to make a disassembly video. Thnx you helped me get it apart but now i have to search elsewhere to get it back together *edit* thank you FullMetalFMJ (for all of you who cant follow someone going 90 miles an hour on weapon assembly)
I'm in the middle of reassembling my Shockwave by following this video. It's hard to follow and too fast. Just like other comments mentioned, here I have to search somewhere else to complete this task. Very frustrating. Please take a slower approach next time and consider the viewer.
I agree.. doesnt show or even desc ribe relationship of some parts for reassembly..( never assume they r self explanitory or 'obvious')..no.points for having the shortest vid for this..
just cleaned mine for the first time today. coming from my H&R pardner shotguns i have to say this is a bit more difficult, had trouble getting the trigger group back in as well as lining up the bolt carrier to the slide and bolt.
Very hard to follow for a first time break down and reassemble. Even pausing the video during reassemble there were times you only showed parts for a second before moving onto the next step. Had to watch a different video to put back together. Try slowing down and showing steps in greater detail.
first comment is my exact thoughts, thanks speedy, if your going to do a video show everything or dont get on youtube, some of us are stuck at certain points
I used this video successfully, but damn man; arrange the bolt and reciever in correct orientation on the table and DO NOT twist and turn it as you assemble! Give some warning about the two shell bars falling out of place and the need to use fingers to retain them while getting the trigger assembly to slide foreward. I gave you a tumbs up, but damn! Make me appreciate my 870 WIngMaster, lol
After awhile the bolt amd stuff get easier. The shell stopper amd extractor "bars" fix is use to magnets on the outside of the gun to hold the bars in place hands free. Much easier
thanks mate. i bought some ammo that was too long for the gun so they got hung up when i tried to chamber them. need a vid to go by for my first time disassembling
A. S. I agree. I use T-shirt rags or cotton shop towels. It’s also a good idea to have compressed air handy to blow out any loose dust mites on everything.
Just picked one up like a week ago. I want to do a full breakdown and cleaning but would kick my own ass If I put it back together and it didnt work right
I’m glad the video exist it just goes way too fast it’s for someone who is super familiar and touches and shoots guns all the time a novice which is me I had to watch it 30 times and read the instructions that came with my shotgun 30 times and it still took me well over an hour to do what you did in five minutes that you probably could’ve did blindfolded would be real nice if you would slow down the video especially when it came to the bolt would’ve been really nice just slow down each step by a few minutes zoom in with the camera that be real nice of you I think I’m going to make my own video
Probably just gonna take mine into the gun shop to have them put it back together for me & show me in person what to do, I dont understand why 3:45 gave me soooo much trouble
I just did my first cleaning today (got the gun yesterday) and reassembled... now the safety won't disengage :( It's staying stuck in the locked/safe position. Any thoughts/advice?
He even speeds up portions of the video. I wonder if he thought it would be funny to know there are a bunch of Mossberg's that are lying around in pieces because of his "helpful" video.
Yeah, it's fast...just slow the video down. The beauty of TH-cam, there's many other videos on there. You can take something from this and something else from another. Once you get a good idea of the assembly at first, keep repeating the process several times for repetition. Once you see how things are correctly aligned, it becomes much easier. Eventually, you'll just get it and instinctively know how to dissemble and put things back together without instruction. The proper alignment is key, focus on that. Play around with it gently for a while so you don't scuff the metal components. It'll make sense at some point and you'll have that "oh yeah!" moment.
Better lighting and show us where each part is coming from. Some of us that are not familiar with the gun you're pulling out these parts quickly and we don't know what they are
Not enough info you didn’t even really describe how the arms of the pump have to line up with the bolt carrier I’m a rifle and handgun guy so I watched this video got it reassembled and the bolt wouldn’t camber a round because I didn’t know they went together. You know what you’re doing but this isn’t very informative and everything goes by entirely too fast
Need better lighting on the gun. Cant see where the parts come from, or go back. His hands are in the way most of the time. Going way too fast. Total waste of time to watch this.
Were you seeing how fast you could make this video? You clearly know how to do this, we get it. But this is a poor instructional video for anyone who isn't as advanced as you are with taking down, cleaning, and reassembling this firearm.
ridiculously fast. Not sure what the point of this video is. Stopping multiple times and its a pain in the arse. A ten minute well explained video would hvae gone much further.
Way to hard to follow, this guy is an awful instructor. Too fast and not enough detail. Going to have to watch another video to figure out how to put my gun back together...ugh
Just something to ponder: I’m 70 years old and have had Parkinson’s Disease for 9 years. More recent research has concluded that exposure to chemicals, solvents, weed killer and household cleaners might make one susceptible to this disease. I am a huge advocate for the use of heavy-duty gloves and an appropriate respirator when cleaning firearms. I cleaned guns for years and bathed in Hopppes and other gun solvents. You have been warned. Also - great video and thanks for taking the time to share your knowledge. I have a Shockwave and this is truly helpful. Jim
Taking it apart was hard to follow but heck and life it's always easy to take stuff apart it's putting that together that's hard and you explain that perfectly thank you
It was evident that the person was well schooled in taking it apart, and putting it back together. Would have been great if the video was in slo motion for first time cleaners until they become skilled at doing this. Always a challenge when totally disassembling.
Damn, I didn't know the stripping and cleaning my Glock 19 would be easier than my Shockwave 590..This is going to be interesting...
i just got done cleaning someone elses shockwave. goddamn it is a fucking pain in the ass.
It doesn’t get much easier than a Glock take it out of battery pull the tabs on the side and pull the slide off then pop out the spring and barrel clean lubricate and put back together takes 10 mins max
12Gs have some of the most complex parts in firearms, a lot of people don't know this
I wonder if there are anybody else on youtube that knows how to make a disassembly video. Thnx you helped me get it apart but now i have to search elsewhere to get it back together
*edit* thank you FullMetalFMJ (for all of you who cant follow someone going 90 miles an hour on weapon assembly)
Brother, I agree!
Glossed over the stopper. Make sure you know what it looks like before removing.
I bought a new shockwave ,still haven’t fired it but I’m planning on taking it to the range . Great video
I'm in the middle of reassembling my Shockwave by following this video. It's hard to follow and too fast. Just like other comments mentioned, here I have to search somewhere else to complete this task. Very frustrating. Please take a slower approach next time and consider the viewer.
BibleLifeMaui
There’s a couple great TH-cam videos for disassembling a Mossberg 500! Exact same parts same and same disassembly...but slower.
Play it at half speed then.
its very similar to a maverick 88 just watch their video
I agree.. doesnt show or even desc ribe relationship of some parts for reassembly..( never assume they r self explanitory or 'obvious')..no.points for having the shortest vid for this..
you can pause the video
Good video. My first time disassembling, cleaning, lubricating and reassembling. This video was super helpful.
just cleaned mine for the first time today. coming from my H&R pardner shotguns i have to say this is a bit more difficult, had trouble getting the trigger group back in as well as lining up the bolt carrier to the slide and bolt.
I have a mossberg 500 pistolgrip. The first time I did a full take down and put together was like heart surgery.
Very hard to follow for a first time break down and reassemble. Even pausing the video during reassemble there were times you only showed parts for a second before moving onto the next step. Had to watch a different video to put back together. Try slowing down and showing steps in greater detail.
Yea this guy isn't really explaining the brake down process very well, he's flying through out the entire video smh!
Yes agreed
first comment is my exact thoughts, thanks speedy, if your going to do a video show everything or dont get on youtube, some of us are stuck at certain points
where did this extra part come from?
For a video less than 5-minutes long, this got the job done for me. What more did you need for reassembly?
I have a 25 year old Winchester 1300 that has never been cleaned that good!
I used this video successfully, but damn man; arrange the bolt and reciever in correct orientation on the table and DO NOT twist and turn it as you assemble! Give some warning about the two shell bars falling out of place and the need to use fingers to retain them while getting the trigger assembly to slide foreward. I gave you a tumbs up, but damn! Make me appreciate my 870 WIngMaster, lol
After awhile the bolt amd stuff get easier. The shell stopper amd extractor "bars" fix is use to magnets on the outside of the gun to hold the bars in place hands free. Much easier
thanks mate. i bought some ammo that was too long for the gun so they got hung up when i tried to chamber them. need a vid to go by for my first time disassembling
Personal opinion here. . . I think using paper towels is a bad idea. I use old T-shirt rags. Much less debris.
A. S. I agree. I use T-shirt rags or cotton shop towels. It’s also a good idea to have compressed air handy to blow out any loose dust mites on everything.
Darren Ward - I use a barber brush to get all the dust off. In the field you don’t have electricity to power a compressor.
@@CatMan_7 good tip on the barber brush..👍
P.S. I think he was talking about compressed air in a can
Personal opinion here. . . I used Tampons.
Can you do one with the crimson trace (rds) removal too? Uuhhh asking for a friend lol
Good video just had to pause or rewind a couple times👍
Thank you for the help and the detailed instructions.
Also. It comes with a manual there is a section where it will show u how to disassemble the weapon
Jimmy Reese not if you purchase it from a pawn shop as a used gun
Awesome detailed but quick video. Thanks for sharing
Is the trigger assembly on the shockwave metal or composite? I want a 590m and I’m just wondering if I’ll have to upgrade it.
Are you making these videos for the flash?
Just picked one up like a week ago. I want to do a full breakdown and cleaning but would kick my own ass If I put it back together and it didnt work right
I’m glad the video exist it just goes way too fast it’s for someone who is super familiar and touches and shoots guns all the time a novice which is me I had to watch it 30 times and read the instructions that came with my shotgun 30 times and it still took me well over an hour to do what you did in five minutes that you probably could’ve did blindfolded would be real nice if you would slow down the video especially when it came to the bolt would’ve been really nice just slow down each step by a few minutes zoom in with the camera that be real nice of you I think I’m going to make my own video
Probably just gonna take mine into the gun shop to have them put it back together for me & show me in person what to do, I dont understand why 3:45 gave me soooo much trouble
Moving a little too fast! but, Thanks!
Excellent vid.
Thanks, excellent video, saved me some headaches.
Umm yeah I had to find a sweet spot with the fore end/slide rails to install the trigger group....no mid point with mine
Good informative video now lets see if i can do it . u made it look so easy
How about speeding it up even more that we we really can’t follow
I just did my first cleaning today (got the gun yesterday) and reassembled... now the safety won't disengage :( It's staying stuck in the locked/safe position. Any thoughts/advice?
Sheeeesh any updates? I havent taken mine apart yet
Thank you for the video
After how many shots you should clean it?
Thousands. It's a pump; it'll run.
I think Remingtons quality has gone way downhill in comparison to the 70"s & 80"s but the 870 ia SO MUCH EASIER to take apart and reassemble
if I could follow at this speed then I wouldn't need to be watching a friggin video on how to do it now would I?!
Not enough detail in the reassembly instructions!
I paused and rewinding like 20 times
The disassembly, 95 out of 100. The reassembly, 60 out of 100
It ridiculous how fast the instructions and video are moving.
He even speeds up portions of the video. I wonder if he thought it would be funny to know there are a bunch of Mossberg's that are lying around in pieces because of his "helpful" video.
Agreed!!!!! SLOW DOWN
You can literally change the playback speed if it's too fast.. boomers
is that a metal trigger group? or plastic?
I had to stop and go back 100+ times. We ain’t moving as fast as you
Great video! To everyone saying its too fast, you know you can alter playback speed in settings gear to .5 or .75 to see it in slow motion. ;)
Im looking for a place that will clean them for me. A drop off. 🙂
Put a B-TAk Forearm Strap on your Shockwave for better ergonomics & Add Some Bling to YOUR STING! Good instructional video, keep up the good work!
Thanks
Perfect. Thanks
Yeah, it's fast...just slow the video down. The beauty of TH-cam, there's many other videos on there. You can take something from this and something else from another. Once you get a good idea of the assembly at first, keep repeating the process several times for repetition. Once you see how things are correctly aligned, it becomes much easier. Eventually, you'll just get it and instinctively know how to dissemble and put things back together without instruction. The proper alignment is key, focus on that. Play around with it gently for a while so you don't scuff the metal components. It'll make sense at some point and you'll have that "oh yeah!" moment.
people complaining the video is too fast must not realize you can slow videos on youtube lol..
Better lighting and show us where each part is coming from. Some of us that are not familiar with the gun you're pulling out these parts quickly and we don't know what they are
Dude you go to fast having trouble with putting the cartridge stop back on.
Can it be more faster and less detailed??
Sacarcism... Works sometimes right?
Not enough info you didn’t even really describe how the arms of the pump have to line up with the bolt carrier I’m a rifle and handgun guy so I watched this video got it reassembled and the bolt wouldn’t camber a round because I didn’t know they went together. You know what you’re doing but this isn’t very informative and everything goes by entirely too fast
Need better lighting on the gun.
Cant see where the parts come from, or go back. His hands are in the way most of the time. Going way too fast. Total waste of time to watch this.
The way you explained how to put the bolt back in didn't help one bit
I would never dip my brush in my solvent smh..
To fast need to slow it down
Were you seeing how fast you could make this video? You clearly know how to do this, we get it. But this is a poor instructional video for anyone who isn't as advanced as you are with taking down, cleaning, and reassembling this firearm.
could this guy go any faster ? never did this before had to rewind it too many times
typical gun guy thinks everyones on level10
It's not that hard. First time cleaning mine and I just memorized all the parts.
It's called "read the manual first". Yours should have come with one.
Reassemble you didn’t help AT ALL!!!!
terribly hard to follow.
Video sucked way to fast
Very poor camera angles.
Terrible. Too fast to keep up with and tired of hitting pause all the damn time
ridiculously fast. Not sure what the point of this video is. Stopping multiple times and its a pain in the arse. A ten minute well explained video would hvae gone much further.
This video is terrible the instructions aren’t detailed enough and doesn’t show what your exactly lining up
Awful video. Sped up. Terrible camera angles. Wish I had never seen it. Tried watching it at .50 or .75. Still useless
this is such a poorly made tutorial
This video angle is trash.
out of the 10 video i have watch ur is the 2nd less helpful.
WTF?
This is a horrible breakdown!
How often you clean after the range?
No thanks lol don’t want that thing🤦🏻♂️
Terrible
Way to hard to follow, this guy is an awful instructor. Too fast and not enough detail. Going to have to watch another video to figure out how to put my gun back together...ugh
a little oversimplified
How often or how many rounds of shooting before you clean a Shockwave?
200. Mossberg Specifically writes it in the owners manual.
Thanks