JetBoyCo - Chevy Express Wheel fitment *MOTO VAN* 20s!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ต.ค. 2024
  • In this video I go in depth to show you the fitment of 20" wheels on my 2013 extended chevy express motovan. Please let me know if there is anything else you guys would like to see on the van, otherwise I am going to keep dropping videos of my choice. Below is the camera gear that I use as well as other items seen in the video.Check me out on social media below. Also, at the bottom I have listed equipment I use.
    Facebook: / jetboyco
    Instagram: / jetboy_co
    Instagram: / jet____boy
    Equipment:
    GoPro Hero 8: amzn.to/2Gg7qxV
    GoPro Hero 8 Waterproof Case: amzn.to/3lIw6hY
    GoPro SD Card 64gb: amzn.to/31bj9FI
    Airpods 2: amzn.to/2IxYHbE
    GoPro Shorty Mini Extension Pole Tripod: amzn.to/30h64Ko
    Gear:
    Bell Moto 9: amzn.to/2H29k5V
    Alpinestars Tech 10s: amzn.to/3k4WUZA
    100% Armega Goggles: amzn.to/3iUZwaY
    100% Armega Tear offs: amzn.to/351Hcrz
    Vans Authentic Shoes: amzn.to/2GZIwmQ
    Bike:
    Pit Bike Handel Bars: amzn.to/340INPl
    ProTaper 1/3 waffle Grips: amzn.to/3dti3dj
    Seat Cover: Guts Racing Inc.

ความคิดเห็น • 26

  • @Hindukushsailing
    @Hindukushsailing ปีที่แล้ว +3

    I have. GMC Savana. Looking to put leveling kit to raise front a couple inch. Put those Vision Manx with Yokohama 265 75 16r. Worried about rubbing even the stock 225 rub on those Chevy GMC vans when you turn right hard over. The vision rims are zero offset ,,,, hope it works

  • @strictlystreet1517
    @strictlystreet1517 ปีที่แล้ว +3

    I’m running 20x10 method racing rims and 20x35x12.5 general grabbers on my express 3500

    • @YourBoyDave
      @YourBoyDave ปีที่แล้ว +2

      What’s the wheel offset

  • @Jared_325
    @Jared_325 3 ปีที่แล้ว +3

    Looks great! I’m looking to do the same set up with mine, just two questions. Are you at stock height? And when you’re going down the road does it ever rub if you hit like a big bump or anything like that

    • @JetboyCo
      @JetboyCo  3 ปีที่แล้ว

      thanks man! I am at stock height, the bigger wheels lifted the van up so it sits taller than stock but only due to wheel size. everyday driving no but if I am pulling into a steep drive or a curb where I have the wheel turned and then going over something then yes. I smoothed everything out so when it rubs its not going to pop it. Hope this helps!

  • @juniorthesoundkilla8431
    @juniorthesoundkilla8431 ปีที่แล้ว +1

    Looks great

  • @thefrog751
    @thefrog751 3 ปีที่แล้ว +2

    Do you think a front leveling kit would be enough to avoid cutting w this particular tire/ wheel size?

    • @JetboyCo
      @JetboyCo  3 ปีที่แล้ว

      Great Question, Im not too familiar with the leveling kits for this style van but it only rubs a little so a leveling kit might help. I am not sure about the other models but the Passenger 3500 sits pretty level stock.

    • @garhead169
      @garhead169 3 ปีที่แล้ว

      @jetboyco check out Weldtec Designs for Express suspension options.

  • @cfilmsllc
    @cfilmsllc 3 ปีที่แล้ว +2

    Looks tight g!

    • @JetboyCo
      @JetboyCo  3 ปีที่แล้ว

      Thanks Homie

  • @crestdee3181
    @crestdee3181 3 ปีที่แล้ว +1

    You in Minnesota?

  • @rsnyooper
    @rsnyooper 3 ปีที่แล้ว +3

    How big of a difference is your gas/mile per gallon with these bad boys

    • @JetboyCo
      @JetboyCo  3 ปีที่แล้ว +2

      I went from about 15.5 down to 13.5....

    • @rsnyooper
      @rsnyooper 3 ปีที่แล้ว

      Thanks man I ordered them for my van! Pumped lol

  • @DrumsByAdisa
    @DrumsByAdisa 3 ปีที่แล้ว +1

    Did you have issues with the sliding door clearing the wheel and tire? If so, how did you address that?

    • @JetboyCo
      @JetboyCo  3 ปีที่แล้ว

      Hey there, yes I do, my apologies for not filming it. The door does rub however by the time the door is rubbing its 95% open so its never been a issue for me. I kind of like it because I can shove the door on it and it'll hold it open. I've just left it as is.

  • @juniorthesoundkilla8431
    @juniorthesoundkilla8431 ปีที่แล้ว +2

    I got 22s in mine

  • @funguy7979
    @funguy7979 11 หลายเดือนก่อน

    I want to run a 33 tire 20x12 and a -44 offset. How much lift should I go with. I've seen 5in lift kits and maybe if I add an 1 or 2 inch bodylift??

    • @JetboyCo
      @JetboyCo  11 หลายเดือนก่อน +1

      Ive never ran anything that big so I can say what will work for sure. I would think 1 or 2in would help with rubbing. These vans don't love the big wheels.. Also to note, with the larger wheels, the front wheel bearings don't last very long. Pays to look this cool haha

    • @funguy7979
      @funguy7979 5 หลายเดือนก่อน

      What if I go with a 20x10 (-24)

  • @chevyc1017
    @chevyc1017 2 ปีที่แล้ว +2

    What size tires

    • @JetboyCo
      @JetboyCo  2 ปีที่แล้ว

      285,50,r20

  • @johnhageman8232
    @johnhageman8232 หลายเดือนก่อน

    Nice kid.

  • @juant7063
    @juant7063 ปีที่แล้ว

    Loock

  • @beyourself1433
    @beyourself1433 2 ปีที่แล้ว

    what a shitty job, there is way I would cut part of my van to make stupid wheels fit heellll noooo I would rather go smaler size and still will look awsome.