I use a similar build up with a 3D printer. It is a crucial thing to have an enclosure. I printed Parts with ASA and keeping ambient temperature around 50 c. No curling, very clean, very strong, and very waterproof
I had that problem with a brake lever on a m365 one time. It was a problem with the magnet that senses when the handle is closed or open. The magnet was simply facing the wrong direction!
I have a Quickwheel 5600w dual motor. I'm not sure but I think they are all from the same maker and redistributed around the world for rebranding. Mine is set for 95km per hour , I have looking at the settings and it says 125km !? I don't know if this means that you can over clock the settings? I was using it for work and I used the removable seat as it takes a toll on the legs after a shift. I have not even tried to get to 95 km per hour never mind 125 on a scooter. They are don't have a good low gravity unless you are on the seat. Stopped using it for now due to 6 points and a£300 fine and bull laws.
There is a much simpler version of it, the "schizophrenic xiaomi". I took the guts of a broken M365 and put it in the shell of a working M365. Two displays, two throttles, two motors, two controllers and two batteries. Other than an 3d printed battery tray extension it looks stock stock unless you know what you're looking at.
Thanx for the video....In my dual motor and dual controller scooter I upgraded my 52V battery from 20 Ah to 26ah but my bms overheats and has to be replaced constantly.....the BMS is rated at 52V 30A.....do you have a suggestion....Thanx.
ridicolous build total waste back end on that is weak as hell now also you have no clearence battery and bottom will get smashed in only way to solve that is bigger wheels which means 2 bigger motors
It's cool. What about ground clearance in case of bumps and other things?
I use a similar build up with a 3D printer. It is a crucial thing to have an enclosure. I printed Parts with ASA and keeping ambient temperature around 50 c. No curling, very clean, very strong, and very waterproof
I’ve never heard that before - a pregnant scooter. What an idea :)
Say huh????
I had that problem with a brake lever on a m365 one time. It was a problem with the magnet that senses when the handle is closed or open. The magnet was simply facing the wrong direction!
I have a Quickwheel 5600w dual motor.
I'm not sure but I think they are all from the same maker and redistributed around the world for rebranding.
Mine is set for 95km per hour , I have looking at the settings and it says 125km !?
I don't know if this means that you can over clock the settings?
I was using it for work and I used the removable seat as it takes a toll on the legs after a shift.
I have not even tried to get to 95 km per hour never mind 125 on a scooter.
They are don't have a good low gravity unless you are on the seat.
Stopped using it for now due to 6 points and a£300 fine and bull laws.
I want to add a KEY SWITCH (extra security ) to the scooter . What wire to modify from the board to make ON OFF key ? Thanks
nice build but tell me how does it do on a speed bump??
I have a question, do you need 2 controllers or is one enough for two motors but equal power?
You need 2
12:38 , that Mercedes??😶
seems good can you videos of real top speed and hill climb?
can the monorim v2 absorber be installed on the xiomi 4 pro scooter
There is a much simpler version of it, the "schizophrenic xiaomi". I took the guts of a broken M365 and put it in the shell of a working M365. Two displays, two throttles, two motors, two controllers and two batteries. Other than an 3d printed battery tray extension it looks stock stock unless you know what you're looking at.
Hallo, compliments for the video. I like your spot welder ..... can you tell me more about it ? Ciao from Italy 🙂
vendez vous ou faites vous des xiaomi comme sur la video?
Sir , can u modified ninebot scooter g2 battery???
What would be the price of a build like this? Cheaper than just buying a 40mph dual scoot?
Roughly around 2000€ is the price
Nice print 3 d it is possible to catch it? Thanks
Nice!
Can you share link 3D design files
I have a 40mph (solar ff light)scooter so my question is if I upgrade the controller can it do 50mph or even 60 with dual 1400w motor ??
The engine would probably burn out
Motor*
Hi, can you share 3d spoiler file?
is this safe to using dual motor with only one controller?
Some esc are made to handle 2 motors, so yes, its safe ! I recommand Flipsky esc as they are awesome when it comes to reliability and customization
This guys speech is makin my head hurt
Thanx for the video....In my dual motor and dual controller scooter I upgraded my 52V battery from 20 Ah to 26ah but my bms overheats and has to be replaced constantly.....the BMS is rated at 52V 30A.....do you have a suggestion....Thanx.
Don’t open the throttle so far
What is this controller for both motor hubs?
We used a controller from this scooter: voltride.com/gpad-foxen-v3/
Post 3d print file 😅
How do u connect a key ignition to a dual controller
controllers have nothing to do with it
what camera are u filming with?
We used a Sony A7SM3
ridicolous build total waste back end on that is weak as hell now also you have no clearence battery and bottom will get smashed in only way to solve that is bigger wheels which means 2 bigger motors
Sorry that frame is not for that it is dangerous. Also there is no shock absorbers, and it is also dangerous and stupid to ride that.
shut up
You only live once
Suspension kits exist bro, ur wrong about what the frame can handle u can upgrade stuff u kno
can the monorim v2 absorber be installed on the xiomi 4 pro scooter