Pros and Cons of the E-Spinner 3
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2020
- A general run through of what you might expect purchasing an electric e-spinner wheel and my pro's and con's of the wheel. For more updates like and subscribe to my channel! Also check out my blog and facebook @
spinstressinthemakin.weebly.com/
&
SpinstressintheMakin - แนวปฏิบัติและการใช้ชีวิต
Thank you so much for the helpful video. My husband bought me this wheel for Christmas, and I really, really like it. I also have a Kromski Sonata and I like it very much as well, and even though it folds down and goes in a bag for travel, it’s really awkward and cumbersome to tote around. I looked at the plastic wheels, and while I can appreciate the inventiveness of it all, I’m really sick of all the plastic. To me, there is nothing quite like a beautiful piece of wood for these types of things.
Hi, I didn’t know about spinning for either knitting versus crochet. Thank you for the advice.
This is 2 years ago but just popped up on my feed. I am a newer spinner and have a Schachts ladybug. I recently bought a nano 2. It’s a disaster and I was really disappointed. I am looking into the ashford 3 and I’m glad to see this video. Hopefully, sometime soon I will buy one! Happy spinning! ❤
The e spinner 3 is a lovely e wheel. It is quiet and easy to store.
Yes the e-spinner is easy to store and it comes with a nice bag to keep it in. I would say the machine makes minimal noise, but if you increase the rpms it will get a little louder, but I personally don't mind it since I watch tv while spinning. Hope that helps!
Hi, thank you for this podcast. I have the same espinner. The trouble I have is when plying. When I’m plying and need to stop, the bobbin-flyer goes backwards and the plyed yarn between the orifice and bobbin gets tangled. Mostly tangles around the yarn guides. I typically spin fine, so my plied yarn is fingering to sport weight. Any ideas of what I should try to resolve this issue, frustrating and time consuming. Thanks very much!
Hi Dave and Terry, thanks for your comment. As for your plying issue, what I can suggest that might help is reduce your speed when you're plying and increase your uptake tension. Hopefully, the slower moving bobbin will not spin out of control as much since it's moving at a slower rate , and the increase uptake will continue to take on any yarn instead of getting tangled in the orifice. If that doesn't help, maybe try looking at the e-spinner groups on Raverly and post your question in the group chat. Chances are that others may have had the same issue and can help you troubleshoot further! Good luck!
Would this make a good first spinning wheel? or a traditional wheel would be better to start? im really interested in this specific E spinner!
I would consider that this is a good e-spinner to start off with. It's from a good company that has been around for many years, so you can find help troubleshooting it. You can spin different degrees of thickness, so it is versatile. You can figure out what you like to spin all on the same wheel. It also takes out the treadling aspect, which is another important layer to a manual wheel, but one that can be enjoyable as well once you learn it. Cons are price and the need of a source of electricity in my opinion. If you have the ability to try before you buy, I highly recommend it. Just remember to give yourself time to learn. It will be a process, but it's also a rewarding one. Hope this helps. Best of luck!
I still have my kromski manual wheel but to be honest I haven't used it much since I got the espinner but that's just my personal preference.😂 Manual wheels are also versatile and fun to have and have more variety to choose from. They definitely have more add-ons that you might want/or need if you plan to spin a certain type of yarn. Do you have any goals set for your learning journey?
@@SpintressStation Thank you so much for the reply!
Since I am just going to start to spin, I'm not too sure. Dont think for now I would need to add extra parts.
So far I've been using a drop Turkish spindle. I would love a wheel since it would allow me to spin more quickly. It would be just to spin at home, mainly fingering - dk weight, yarns for myself. Not planning on selling or spinning huge amounts. ☺💫
Hi! Where do you buy the battery pack if I want to spin in a park for example…? Thanks
Hi! One place to buy the battery pack specifically made for ashford is here. woolery.com/e-spinner-deluxe-power-pack.html
But you can also see if Amazon carries it or might have something with a longer battery life you could try and use! Good luck, spinning in the park sounds amazing!
I hope you are able to get this comment although your video was posted 2 months ago. I just now found you. I have an Ashford e-spinner 3, but I prefer to spin fine yarns. Maybe I should have bought a different model. But here’s my question. I find the e spinner has a much higher pull on the fiber than a traditional treadle wheel. Even when I turn the tension as far down as it will go I still pulls the fiber in quicker than I want. What do you suggest?
Hi there! You can try running your yarn through both bobbin holes to help reduce the amount of tension of your intake (I would have them staggered and further away from each other), you can't do it as much as you could with a regular bobbin with hooks but it's worth a try. You can also look into getting a looser spring for your tension knob as well and see if that will help! Hope these tips help out a little bit!
@@SpintressStation thanks
I'm using a drop spindle to ply thread for crochet but want to try spinning with wool roving to make thread. Is this the machine for me, as a rank beginner? Considering trying it first with the spindle.
@@troutdaletim I would say that you can definitely use a drop spindle to spin wool roving! That is how many ancient civilizations made their yarn before the invention of the spinning wheel! Just remembered when playing to add twist the opposite way you started with your singles so you get a nice ply and don't over-twist your yarn in one direction! Good luck!
Do you have any tips or tricks for lessening the bobbin noise? Mine rattles quite loud on the shaft.
Hi Maxwell does it happen with all your bobbins or just one in particular?
if it's one it could be the bobbin but if it's multiples try buying some white grease lubricant a hardware store and put a little on the front and back of the bobbin when its on the flyer shaft, then a drop of oil, this might help lessen the noise. When you're done spinning, wipe off the white grease because it can become sticky. Hope that helps out!
Have you ever felt it’s underpowered, too slow? Thx
Hmmmm I don't think so I tend to spin lace weight but I've heen able to do that fine at its higher speeds ( though i have noticed it can have more pull on the fiber at higher speeds so you might need a method to reduce it's uptake while spinning fine with it). That being said it may not be the fastest model out there but I haven't been able to try other companies e-wheels since they can be hard to get your hands on and are more expensive. But I guess my question for you is what do you envision spinning on your wheel?
It would be neat if u could plug a foot pedal in to it like a pottery wheel. Keep ur hands free, but I guess once u set the speed and tune your tensioner, its moot.
Hi there I must have forgotten to mention it, it does come with a pedal you can plug in to turn it off and on. I usually have it on the couch with me since I like to recline with I spin. If you don't plug it in then you would use the on and off bottom to stop it would definitely be tedious!
Spin only depends on rpm and doesnt increase with orifice reducer…
Thanks for the info!
wow, well that presentation style and camerawork sure took me back to 2007 before people figure out how to youtube.