I have a problem here,when I switch on my control box it pours water into the tank for about a few seconds and then stops and thats it. Its hard even to fill in the water tank as it used to. What could be the problem?
@@Gastyleespartar Nah the water level was a bit lower than we had known. We had to add more of the safety rope and the 4 core cable thats all. Thanks anyways
When I wired my pump into my control box it worked like it should I had water So two days later I went back out to turn it on now I don't have water I didn't do anything to pump or control box tia S
Is it technically correct procedure*"; ?? to connect the run capacitor in series *from neutral terminal(N)* to start winding ??- of PSC submersible Motor
The title of this video should be "how water pump works". You did not show us how you brought in the live wire into the box and the connection to the pump.
lol i kinda like your accent bro,and i really found this helpful
Does the control box purpose to be on through out...??
Nice Demonstration 🙏
Excellent explanation.....very helpful...... kudos...
Hello. When installing the pump into the well. Should it touch the ground of the well
No it should hang a little bit above the ground but still be full submerged in water
Thanks for your information
Karibu welcome
PSC type - single phase SUBMERSIBLE motor ; *do NOT have polarity??*
Hi thanks for the good work
How come you can't show how you connected the wires
that was the reason i was watching
Isn't the pressure of pump low?
I have a problem here,when I switch on my control box it pours water into the tank for about a few seconds and then stops and thats it. Its hard even to fill in the water tank as it used to. What could be the problem?
You need to replace a new pump
@@Gastyleespartar Nah the water level was a bit lower than we had known. We had to add more of the safety rope and the 4 core cable thats all. Thanks anyways
There is something called sika flex why i can't see it?
How do you connect the float switch in the control box
I will make video on that
When I wired my pump into my control box it worked like it should I had water
So two days later I went back out to turn it on now I don't have water I didn't do anything to pump or control box tia
S
Helpful
Hello sir how to wiring float switch in control box
Saan kayu bumili nito tpos magkano isa
What is the use of the control box
to control power and protection against overload and short circuiting.
❤
Hi thanks. Can it used oil
thank you for the information
Great
Is it technically correct procedure*"; ?? to connect the run capacitor in series *from neutral terminal(N)* to start winding ??-
of PSC submersible Motor
What is the amount money and what cost it
It depends on where you live 200 usd
hello i have a submersible with low pressure
Interesting
Magkano yan
The title of this video should be "how water pump works". You did not show us how you brought in the live wire into the box and the connection to the pump.