Might keep this video in mind...I got a 27 yo Atwood furnace in a Fleetwood Storm class A that has been a flawless heater...now I said that...failure/jinx or some combo! hahaha!
Hello, I have the same furnace, 2016 21 foot Wildwood x-lite 201 bhxl. With a NT-20SEQ furnace I had a red wire come loose on the thermostat I reconnected the wire but only the furnace fan will come on but Heat never comes on it's hardly been used, maybe three times. The thermostat was annoying you could only push it so far and then the spring would stop it and then you had to go push it harder to make the temperature go up
Do you remember the one I called you about and the high limit switch, that’s what I faced when I first worked on it, fired up every time, but found out that switch would break and not reset but after bumping it around fired up. Just a thought my friend
Thank you. On a different problem, my small led lights stay on with a low glow. It is extra humid. Do you happen to know what could cause this problem. Thanks again.
that’s to high for gas pressure. it’s supposed to be 11 inches water column with 8 inches per RVIA standard. you still doing the hats? what’s your amazon?
Every propane appliance that I have ever worked on has a sticker on it that says it requires 11-14 WCI to operate. I am going to stick with that. Hats are gone. Amazon www.amazon.com/shop/hillbillyrv
I used to anchor the case with a screw or 2 then it helped me slide the innards out.
Oh, that is a good idea. Thanks.
Great idea using the tin snips for making a slot. Thanks Don
Done it hundreds of times.
Thank you.
You are welcome.
Might keep this video in mind...I got a 27 yo Atwood furnace in a Fleetwood Storm class A that has been a flawless heater...now I said that...failure/jinx or some combo! hahaha!
Ha Ha....yep, that's how it would go for me too.
Happy New Year!
Same to you!
Right on Kenny great video 😅
Thanks
Hello, I have the same furnace, 2016 21 foot Wildwood x-lite 201 bhxl. With a NT-20SEQ furnace I had a red wire come loose on the thermostat I reconnected the wire but only the furnace fan will come on but Heat never comes on it's hardly been used, maybe three times. The thermostat was annoying you could only push it so far and then the spring would stop it and then you had to go push it harder to make the temperature go up
Any help would greatly be appreciated
If fan comes on them thermostat is working. If furnace doesn’t fire then there is something wrong with it.
Another great video. Happy New Year to your family.
Happy New Year to you also.
Do you remember the one I called you about and the high limit switch, that’s what I faced when I first worked on it, fired up every time, but found out that switch would break and not reset but after bumping it around fired up. Just a thought my friend
It was trying to ignite, but never did until I took it out of the camper.
@@hillbillyrv oh ok that different
Thank you. On a different problem, my small led lights stay on with a low glow. It is extra humid. Do you happen to know what could cause this problem. Thanks again.
Bad ground?
Repair mchanics never mention about the Clutz Capacitor or the Quantum Diods. Or the Thermostat controller!
I would never mention those things....NEVER
I have not seen as of yet but might you have a video of a furnace with a cracked firebox sir.
I have only seen a couple of cracked fireboxes ever, but from what I understand, it is getting more common on newer Dometic furnaces.
Bummer
At least it worked when I left.
that’s to high for gas pressure. it’s supposed to be 11 inches water column with 8 inches per RVIA standard. you still doing the hats? what’s your amazon?
Every propane appliance that I have ever worked on has a sticker on it that says it requires 11-14 WCI to operate. I am going to stick with that.
Hats are gone.
Amazon www.amazon.com/shop/hillbillyrv
@@hillbillyrv interesting. learning something new! thanks hillbilly
@@hillbillyrv darn i missed out on the hats oh well