Too Much Silicone Gasket Maker in your SeaDoo Rotax Engine? + Motor Tear Down + Calas Tech Tips
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- This motor has way too much Silicone.. Today I will explain, and show you why too much silicone is bad for your Rotax motor.
Lets see wha happen!
Be sure to follow me on
IG - / calasperformance
FB - / calasperformance
Check out my Website
Calas Performance www.calasperfo...
Check out DDR Performance
ddrperformance...
Check out the fizzle factory
www.fizzlefact...
#calasperformance
#seadoo
#fizzle
#ddrmarine
#pwc
#jetski
#calasWorld
Director/Video Editor/Producer/Drone Pilot/
Dessie Vizcaino
I’m not a 4-stroke SeaDoo guy, but there is so much to learn from Calas. There should be many more subscribers to this channel than there is. Good work, and very informative!
tim rebuilding a 717 right now and was just googling this @6:14 HAHAHHAHAHAH
Im not a mechanic but with all this tutorials Im about to work on my own motors.
" Last Stanza"
🎉💪
Awesome channel..I learn mucho..! Thx a...
The engine stand should be named Walter after myself. Ability to hold a load for a long period of time, be patient and wait and still remain reliable. Lastly, the stand waits on Calas but Calas never has to wait on the stand (just like Walter 😉). So there. Name the stand after me 🫠
You could replace 100 friends with one guy like calas.
That engine having the CB off with the increased vibrations would also contribute to an increase in bearing wear. He is correct the more fuel you dump into an engine the more it can mess up the oil
I always stress with my junior mechanics that its INCREDIBLY important to use a little as needed with gasket maker, ALWAYS ALWAYS ALWAYS make sure you use hand tools when installing sensitive bolts. Never use an impact when the instructions call for torque wrench!
Nice video Ernesto, we tank you💪🏼💪🏼
If the silicone has cured and it's brittle then you have probably use to much cataylst during the process .
Great stuff man I don’t even own a jet ski but love how you explain and put out there your knowledge I want to get one because all of my motorcycle buddies are getting jet ski’s, Will love to see a video of what to look for in a use well maintained ski or is it better to buy a new one
Name the engine stand “The Operating Table” because the engines undergo emergency surgery from Doctor Ernesto!😂 every time I hear ernesto’s voice all I hear is when he was talking about his harbor freight compression tester and needing to use his friends for better accuracy! I love when he uses the deep voice! “My friend has a snap on!” (In the deep voice!) 😂 please say it again next video!
Clutch stand 😅
🤦♂️😂😂😂
We need a Part 2!
Gracias por tus videos eres un apasionado de tu trabajo y aprendo mucho de tus videos 💪💪💪
NO MAMES WEY!!🤣🤣 Great Video man! Very Informative! So many mechanics make this mistake with using too much Silicone. Then they get it in "la pinche malla" 🤣🤣
Name the engine stand Buster.
Best videos ever fearless!!!!!!!!!!!!!!
Ernesto your Stands name should be john boy. its beat the ef up but strong as an ox lol. also the disposable roller from the dollar store is perfect for applying the sealant for the cases. cost is 1 dollar lol
Another Great video 👍🏼 I wish I knew how to tear them down and rebuild them like that 👍🏼 , Greetings from Austin Texas 🇨🇱 . Lake Travis . Sea Doo Life 🌅
Great info. Thank you for sharing your knowledge. Love the channel.
Another great video keep up the good work i love watching your videos from down here in Hobart, Tasmania.
Gotta luv watching Ernesto . But dude don’t time lapse the video or Ernesto will fire your butt. 😂
Question: after replacing the throttle body on a 2016 RXPX 300, would the throttle body need a calibration using can doo or buds?
You should have a big shop and a team selling custom pwc's and repair shop. I will trust you more than a dealer!
Stan the stand
Tio Ernesto 😂 keep up the good work
There not a single video where I dont learn something new!!
Hector the engine stand lol
Engine Stand- palo trancado
Thanks mate. Loved this video
With what u said at 5:30 someone impacted drilled TF out of my head valvue bolt and bent it, Took me 5 full days playing around to finally get it out to find it bent, also just thought it was just corroded real bad! Good Video.
Love the video! I am learning from your content. Thanks for the awesome video!
In the USMC, we always called stands similar to that a "hotrod". Go get the hotrod
Engine stand = EL Chapo!
Name the engine stand The Hulk!!!!
Great stuff. Love these videos. Always curious with how and why these motors wear and fail. (Modded rxp215 459hrs still running strong)
Great video !!!! Thank you Ernesto
Name the engine stand “little Calas”
Hello Calas, after how many hours you recommend changing oil on stock jet ski? Nice video ! thank you
Hello my friend on a stock JetSki you can go with the factory recommendation Which it will tell you know maintenance required on your dash
name for engine stand : " the silver fuse..."
Hayyyy mi madre 🤦🏼♂️🤣🤣🙏🏼🙏🏼🙏🏼
Transformer's Stand
Engine stand name: "The chopping block"
Hello I love your videos and I learn a lot.
How many hours can my 2013 seadoo gtr 215 do.
It has a 560 hours now
Thanks
Hi Ernesto I’ve just bought a 2006 rxp supercharged with 190 hrs would you recommend changing the cam gear bolts and flywheel bolts it has a good service history with it
If you are keeping it stock, don’t touch it if you doing any type of performance yes, I will change the flywheel bolts
@@calasworld thanks I’m keeping it standard
"FrankenStand"
Franken-stand
Frankinstand
I have doo2021 it left me in the water 2 times but it doesn't turn on I changed the relay to turn it on but it came back and it was the same after I used it 4 times I took it out of the water I took out the relay I put it on and it turned on that you think it can be the problem?
Merci beaucoup ❤❤❤❤❤❤❤❤
Engine stand name: Standy McStandface
Bueno por lo menos no perdía aceite con tanto ultra grey 😂
Would you recommend using liqui moly Marine oil. I have a 2016 RXPX 300 ?
Thanks for all the videos you provide!
I saw their booth at the World Finals last year at Lake Havasu. I’ve heard good things about their product from other shops but I can not give you an honest answer I have not tried their products.
@@calasworld what type of oil do you use? I do know you have to be careful what type of oil to use so you don’t damage the super charger. I guess I have some research to do
“Old Standy” ….
La pinche bomba de aceite tiene metal en la malla! NO MAMES WEY! 🤣🤣🤣
Haha no mames wey🤣🤣🤣
Thank very much for this episode. One question Did you have to do anything for the For the surfaces of the cam bearing in the head.?
No there’s nothing to do. There is no bearing on the Seadoo head. if it’s messed up, you have to get a new head.
"Standly"
I have 2022 RXP 300 MILLEMIIN YELLOW did you have stage 2 Avaliable ???
what is pinning the crank
Como ay muchos mecánicos que no saben bregar con motores sea Doo 😂😂😂
Name it Standley.
hey Calas do you rebuild honda aquatrax motors?
No sorry
When reinstalling the engine , do you always use a engine alignment tool?
No
Use nil none awful stuff inside engine
What bearings do you recommend if you are going turbo?