Use code EVANANDKATELYN50 to get 50% OFF your first Factor Box at bit.ly/3rtCbaL! Also for those wondering about Evan's back: it's pretty bad right now and still affecting how much he can do on a daily basis. Our video schedule might be affected while we're trying not to push too hard. Hopefully he can avoid surgery but only time will tell. We'll try to give more updates as we have them.
My dad had surgery on his back after years of chronic back pain, he still relies on a tens unit to help with pain. I am very sorry Evan is having similar pain and hope for his recovery...stay strong both of you.
Hello fresh does not reduce waste, nor is it more Eco friendly than grocery shopping. They also mistreat their employees. They are up there with betterhelp as companies you should not be sponsored by
I died when he hurt his hand but stopped to grab a drink and sip while writhing in pain. The "slurp slurp slurp" while being questioned just tickled me for some reason.
you two are litterally some of my favorite youtubers, always love your videos as they just feel both cozy and wholesome, regardless of what y'all are doing
I've been stuck in the hospital since Tuesday when they had to hammer a rod into my tibia after I split it falling down the stairs. In my drug addled state I'm imagining them doing the surgery with that hammer multi tool and laughing so hard I'm crying. Thank you two for giving me a moment of levity in a terrible week.
@@Dawn_Hannah Thank you! I'm already walking a bit with help and may get to go home tomorrow, though I'll still have to come back for rehab and stuff. But I figure it's a good sign if they're considering it already
There was a cup turner photoshopped into a bunch a pictures and one of them was of a couple having a candlelight dinner. It wasn’t on the table or even in the restaurant. It was outside the window like it was stalking them.
With those drill pumps, you are supposed to prime them first. Put some fluid in the pump first (pour a little into directly), and then run it. It have a longer life also. They work surprisingly well.
Ikr, a flex shaft tool for 60 bucks it’s actually really good and from how well it looks like it worked without the proper lubrication, I feel like it’s more their lack of technical skills. I use flex shafts for jewelry and they are technical tools, considering how loud the noise was I’m assuming they had their foot on the pedal full force and definitely not used to the tool.
They do seem useful for when syphoning via gravity isn't possible, provided you know how to use one like you said. For a special case, I have an antique drill that's still corded and plugs into the wall so the last two words I want to use with it are "cheap" and "water" lmao.
i dont think its katelyn's, they've said in a recent video that they've hired people to edit now and katelyn barely does it anymore in order to focus on other parts of their projects... at first the hired editors only edited the gaming channel but they liked the work so much that now the editors work on the main channel! :)
The hammer hammer hammer hammer pliers pliers tool made me laugh so much that I had to pause 4 times. I admit I drooled a bit while laughing 😅😂 That was the best purchase, recommend for good laugh ⭐⭐⭐⭐⭐
I have a request! I’ve been wanting to know about what would happen if you made a gingerbread house and then poured resin over all of it? Would it catch fire? Would it seal everything forever? Would the frosting melt? The world needs to know! I feel like you guys are the only ones that can answer this question! Love your channel!
This was really funny! I wonder why you two have never given/made Katelyn a personalized, custom sized, workbench. :) If it were the right height, she could drill straight!
Honestly a normal workbench would probably be fine cause I think their current one is custom closer for Evan. lol Cause reminder, Katelyn is actually a normal 5'6 but Evan is a giant 6'5
I was crying laughing and was trying to tell y’all to breathe while desperately trying to breathe myself. My hubbs looks at me…I try to tell him about the video but my voice was getting higher and squeakier to the point he says “pause the video cause the dogs in the neighborhood need a break”. I laughed harder!!! Thank you guys for one of the best videos I’ve seen in quite a while 💜
The stick for the weeds looks like a terrible version of a great tool my mom has. It's made with a sturdy stick and a better mechanism with 4 metal grabbers, it's very good at pulling weeds out with a thick deep reaching root. I once pulled out one that had a root as thick and long as a rats tail😂 We help her every year, since the garden is big and since she's gotten that tool I'm actually having fun getting the weeds out of her lawn😂 it also hasn't broken in years and we've used it alot. If anyone else has problems with unwanted plants taking over your grass lawn you should try it out, I can only recommend it
I know Fiskars makes one that actually works, theres not a single dandelion on my in-laws yard. And yeah, its fun to use, Ive uprooted stuff just for funzies.
@@skaggigocharg06 Thats weird, the one at my in-laws is at least 15 years old! Still in perfect working order, just dirty. Fiskars products usually have long guarantees, for scissors its lifetime, have you contacted them? Either you do something wrong or youve had the worst luck with it. Very odd.
9:41 What the hammer multi tool does do is let you hold the nail while keeping your hand safe, it probably isn’t the best way to do that, but it works.
Different type of nail, but I've taken to using my old pair of aquarium tongs when the nail is too small for me to hold comfortably. I imagine a pair of needle nose pliers would work similarly.
the electric carver for a second sounded like Evan screaming, then the new bit sounded like Katelyn screaming, i thought i was losing my mind for a minute there!
this is exactly what i needed today, i accidentally slept through my last exam of the semester and i was so stressed out, the teacher is the best and is letting me retake it, but this video will be perfect for de-stressing, i love your videos you’re the best
The problem with the Drill Pump is that it is probably not self priming. So unless you get the water to the inlet of the pump first it is just going to spin and burn up the plastic.
You know a product has to be good when it has 10 words in its name. Who needs a single snappy brand-name when you can make the title of your product just explain everything about it!
It’s the uncontrollable laughter for me . 😂 Hilarious . I didn’t know if I was laughing at the terrible tools or you guys laughing at the terrible tools . This episode is one of my favourites because of the sheer ridiculousness . Those tools were bad!!! Ahahahaha 😊
I use those pumps and they work great. Biggest mistake people make is they don't prime them. Not sure about that exact model but the ones I have make it very clear in the instructions that it should never be run dry.
OK, I'm the type of person who has to pause and read everything when it pops up and I'm so glad I am right now! I'm only at 0:06 and I'm already dying laughing because one of the 1 star reviews is "My wife left me after I bought this. Please come back Miranda." Then the next comment that came up is a 5 star review that says "So good I have a wife now. Say hi Miranda" !!!! I love when people mess around in Amazon reviews, thanks for including it in your video Evan and Katelyn! I'm only 6 seconds in and I'm already having a blast.
With a little bit of modification, that drill pump is actually a really smart idea. Like people who own fish tanks have to do water changes, and that could make it so much easier! Or even filling a fish tank
Hi guys! I’ve just had a baby in November and I wanna thank you for providing me some much needed entertainment throughout this difficult time! I’ve watched you for a couple years now and I always find myself reverting back to your content. I must’ve watched each video 5x over 😂 hope you guys have a merry Christmas 🎄
The amount of tears I had while laughing when y’all burst into laughter was more than I expected when I first began this video. That was a joy and delight and nothing at all what I was expecting to happen. Amazing as always haha 😂
I've been through some tough times recently, struggling with some loss. I'm so glad I found this channel, it's been really comforting to me. Your chemistry together and positively really helps my mood. Thank you guys so much!!❤
Fun video as always for you two :) I do believe you overlooked one major thing with the pump. most water pumps need to be primed (long story short air is compressible, liquid isnt, so a dry pump isnt really able to do much but once primed (flushed with liquid) the water is able to push/pull/move. I am really curious how the pump would have performed if used 'properly'. Did the instructions not mention anything about priming??
Pretty sure the slot in the concrete hammer is to put a blank pew pew ammo and strike it to ignite it. This sends the nail through concrete. Glad you did not do that.
When you started laughing I started laughing so hard my mom asked me if I was ok 😂. I love your videos. They always make me happy. You are my favorite channel (all of them)❤
To anyone interested in the Flex Shaft. I actually highly recommend getting the "original" version of the Flex Shaft/Pendant Motor showed in the video, it's an incredibly useful tool, especially for small work like Jewelry making. It combines a small handpiece with a lot of power, for less power but more flexibility a "Dremel" is best and for even less power but absolutely amazing flexibility a "Micromotor" is best.... Under the Line, a Flex Shaft/Pendant Motor is basically a beefed up version of the commonly known Dremel Rotary Tool... The leading brand is Foredom, Dremel also offers a model called Fortiflex. Cheers
What makes the hammer part even funnier for me is that my mum, only know the bare minimum of DIY, has bought every DIYing man in the family, and everyone has either stuffed them away never to be found or just straight up threw them away. My dad has at least 7 of them hidden away in a secret compartment in his car that only he knows about.
Honestly I think most people who are disappointed by their Amazon purchase is when they don’t read the product specification thoroughly, I for one am VERY thorough when I read it before buying anything! Even If It’s a cheap product you should do fine😊
I'm sure everyone is going to/has already commented this. But Katelyn, have you tried drilling from a higher vantage point? I was taught to look at the top of the drill, so you can't see any part of the drill below it and not press down at all, just use the weight. For reference, my table is about mid thigh height.
Somebody probably mentioned this already but some drills have a built-in spirit level. That's probably the easiest way to make sure you're drilling straight down. It looks like there are also stick-on levels you can stick on the back of your existing drill.
the biggest problem of trying to pump resin is that it will clog at like 3 uses. It's not easy to remove from surfaces so it's absolutely pointless to pass it through a tube. Maybe with hydrophobic protection but not very hopefull about that eitther
The only thing I can think of to keep it serviceable is to pump _a lot_ of acetone after each use to prevent the resin from freezing up the pump when it cures. But that would undoubtedly melt the cheap plastic in short order.
All the way back in high school I had an art teacher that had us carving limestone rocks. It was so increadibly fun and I always wanted to get into serious carving after that. I never had tools or money, but a few years later a friend of mine showed me he was getting into wood carving. Wood carving was so much more difficult than rock carving because you had to really know how to control your hands. Which I did not! The rock carving was so slow and time consuming which is what made it appealing to me. The wood was too soft and every little nitch took out so much wood...I was left with little undistinguished knobs... But I could TOTALLY see Evan getting into wood carving so the two of you could include it with your resin hobby ❤
I own one of those drill powered pumps that I got at Harbor Freight for like $13. It's great for the RV and for Camping, for pulling water out of the lake or river. It's great for fast quick showers or cleaning things while on the go.
I would have loved to have seen you open up the pump to see how poorly it was constructed from the inside and what exactly broke. Maybe you could still do it in a second channel video?
I stepped away from my computer to do some work and at the 6:20 mark I swore it was just Evan screaming. I just heard "Can I test it?" "How is it?" "AHHHHHHH" 😂
I felt for the drill and straight you could have come from the other side where he poles do not get hit with your hand. I am writing this mid point of that where it was stated there are no zero stars.
For my work, I got that kind of pump. It was a slightly more "industrial" version of the pump, purchased at Lowes, but on day 1 of trying to use it, I managed to break the screw on plastic parts for the hose and had to go to Lowes to buy replacement parts. However, once I changed out the parts, it has worked fine ever since. I pump water as well as thicker liquids with this pump. I did not like that the hose curls and therefore is hard to handle on your own. I zip-tied sticks to the ends of each hose to straighten them on, and, the torque created from spinning the blades in the pump means that the hoses will always be pointing in odd directions while you're using it.
I literally love you guys, everytime I’m bored or when I’m baking and need something to watch I would always looks for you guys videos.They are so entertaining and funny. Ps: love the editing
Use code EVANANDKATELYN50 to get 50% OFF your first Factor Box at bit.ly/3rtCbaL! Also for those wondering about Evan's back: it's pretty bad right now and still affecting how much he can do on a daily basis. Our video schedule might be affected while we're trying not to push too hard. Hopefully he can avoid surgery but only time will tell. We'll try to give more updates as we have them.
21:42 I've said this too many times in my lifetime...
I've had nine back surgeries in my life. Please don't do surgery unless you have absolutely no other options.
My dad had surgery on his back after years of chronic back pain, he still relies on a tens unit to help with pain. I am very sorry Evan is having similar pain and hope for his recovery...stay strong both of you.
Hello fresh does not reduce waste, nor is it more Eco friendly than grocery shopping. They also mistreat their employees. They are up there with betterhelp as companies you should not be sponsored by
New merch idea: tshirs with "Technically it works" 😅
Katelyn: "How is it?"
The wood: * screaming *
Thought it was Evan the first time :)
@@Darren_92me too I genuinely thought Evan was just yelling cuz he loved wood carving or something
the wood "screaming" really is the only way to describe that noise
the end was so funny, the weed picker just wasn't doing its thing 😂
its kinda what a saw sounds like but less consistent
At 5:55 when Katelyn says "what are you gonna carve?"
I honestly anticipated Evan going "... wood!" 😄
Same!
“Cats” is worrying when you’re expecting them to use wood… 😂
"Wewd" - Bobby Duke
Me too 😂
Woodcuck: "Did somebody say.... 'WOOD'?"
Put the puppet away, Uncle Joey (Gladstone)...
The laughing fit at the "hammer" got me so bad. You two are delightful
I died when he hurt his hand but stopped to grab a drink and sip while writhing in pain. The "slurp slurp slurp" while being questioned just tickled me for some reason.
10:30
@@Tesdinic 11:48
when she just pulled it out after I died
When the sculpting tool started to make noise I fully thought it was just Evan screaming for a full minute
🤣
Me too!
I did too!
Coming in 3 months late, read this comment before that section. Still actually thought it was Evan screaming for a little bit.
@@cissnajsI was going to say this exact thing.
you two are litterally some of my favorite youtubers, always love your videos as they just feel both cozy and wholesome, regardless of what y'all are doing
thank youuuuu!
Hijacking this comment chain to recommend the book "Back Mechanic" for Evan's back pain. @@EvanAndKatelyn
CozyTubing is the new planking. Or extreme ironing. I'm sorry if I'm 15 years out of date, I've been distracted.
Same
I thought Evan was screaming when the woodworking tool started going 😭 6:20
I've been stuck in the hospital since Tuesday when they had to hammer a rod into my tibia after I split it falling down the stairs. In my drug addled state I'm imagining them doing the surgery with that hammer multi tool and laughing so hard I'm crying. Thank you two for giving me a moment of levity in a terrible week.
Hope you heal quickly! 💙
@@Dawn_Hannah Thank you! I'm already walking a bit with help and may get to go home tomorrow, though I'll still have to come back for rehab and stuff. But I figure it's a good sign if they're considering it already
Oh that mental image cracked me up. Hoping you have a speedy recovery.
Med Science adjacent with E&K. 😂
Oh Lord. 😂 Use to hammer rods in to tibia. It's hammer(x6)
There was a cup turner photoshopped into a bunch a pictures and one of them was of a couple having a candlelight dinner. It wasn’t on the table or even in the restaurant. It was outside the window like it was stalking them.
I'm assuming a cup turner turns a cup.. But why?
Reminds me of the movie about a killer tire xD
@@simonw3858 it's for customizing the cup with paint/resin
**WHEEZING** WHAT?!
Where's the link? hahahah
Evan laughing so hard he activated his back pain is so relatable 😂
With those drill pumps, you are supposed to prime them first. Put some fluid in the pump first (pour a little into directly), and then run it. It have a longer life also.
They work surprisingly well.
Ikr, a flex shaft tool for 60 bucks it’s actually really good and from how well it looks like it worked without the proper lubrication, I feel like it’s more their lack of technical skills.
I use flex shafts for jewelry and they are technical tools, considering how loud the noise was I’m assuming they had their foot on the pedal full force and definitely not used to the tool.
They do seem useful for when syphoning via gravity isn't possible, provided you know how to use one like you said. For a special case, I have an antique drill that's still corded and plugs into the wall so the last two words I want to use with it are "cheap" and "water" lmao.
Katelyn's editing has gotten so good, it is so entertaining to watch and gives me a show-like vibe, love it
i dont think its katelyn's, they've said in a recent video that they've hired people to edit now and katelyn barely does it anymore in order to focus on other parts of their projects... at first the hired editors only edited the gaming channel but they liked the work so much that now the editors work on the main channel! :)
Yeah, while I’m sure Katelyn has the skill, she does not have the time
That "(under $15)" in the title was absolutely passive aggressively added by Katelyn
The hammer hammer hammer hammer pliers pliers tool made me laugh so much that I had to pause 4 times. I admit I drooled a bit while laughing 😅😂 That was the best purchase, recommend for good laugh ⭐⭐⭐⭐⭐
Damn 😂😂😂😂 that’s funny
"It's a hammer, which is also a hammer, but also, a hammer, and pliers, and don't forget, also pliers"
You guys would be really great in sales 😂😂
Not me, bedridden with back pain, suffering because I’m laughing too hard, seeing Evan in the same boat. I feel you, buddy.
I have a request! I’ve been wanting to know about what would happen if you made a gingerbread house and then poured resin over all of it? Would it catch fire? Would it seal everything forever? Would the frosting melt? The world needs to know! I feel like you guys are the only ones that can answer this question! Love your channel!
Agreed with this! Must test the pumpkin resin-ing with ginger bread
That multi tool is something. Technically it removes nails twice: metal and finger. Oh boy my fingers involuntary curled up when that happened.
😂😂😂
This was really funny! I wonder why you two have never given/made Katelyn a personalized, custom sized, workbench. :) If it were the right height, she could drill straight!
Probably because of the static camera setup? I can imagine the angles being all messed up because of it.
Or even getting the woman a footstool
Honestly a normal workbench would probably be fine cause I think their current one is custom closer for Evan. lol
Cause reminder, Katelyn is actually a normal 5'6 but Evan is a giant 6'5
bruh it's gonna take a lot more than a custom made workbench for Katelyn to be able to drill straight
Just get the poor woman a step stool
I was crying laughing and was trying to tell y’all to breathe while desperately trying to breathe myself. My hubbs looks at me…I try to tell him about the video but my voice was getting higher and squeakier to the point he says “pause the video cause the dogs in the neighborhood need a break”. I laughed harder!!! Thank you guys for one of the best videos I’ve seen in quite a while 💜
So glad to see yall uploading! Hope Evans back is doing better!
i wish we had good news and it was doing better! unfortunately it's still really affecting him
@@EvanAndKatelynhas he been doing core exercises to strengthen maybe weak areas and alleviate pain?
Some yoga poses work great
I think I've missed a lot lmao, what happened?
@@FatalRbxI’m wondering the same thing
I dont think ive seen Evan laugh so hard he squeaks 😂
The stick for the weeds looks like a terrible version of a great tool my mom has. It's made with a sturdy stick and a better mechanism with 4 metal grabbers, it's very good at pulling weeds out with a thick deep reaching root. I once pulled out one that had a root as thick and long as a rats tail😂 We help her every year, since the garden is big and since she's gotten that tool I'm actually having fun getting the weeds out of her lawn😂 it also hasn't broken in years and we've used it alot. If anyone else has problems with unwanted plants taking over your grass lawn you should try it out, I can only recommend it
The proper version of the tool works excellent for Dandelions. One of the few ways to actually get rid of them at least semi-permamently :)
I know Fiskars makes one that actually works, theres not a single dandelion on my in-laws yard. And yeah, its fun to use, Ive uprooted stuff just for funzies.
I have a couple of the nice ones too, asked for them for my birthday one year cause I loved my mom's!
@@janemiettinen5176 Fiskars Xact is the best tool I have! And the worst tool I have. They break after a year or two. I think I'm my fifth now...
@@skaggigocharg06 Thats weird, the one at my in-laws is at least 15 years old! Still in perfect working order, just dirty. Fiskars products usually have long guarantees, for scissors its lifetime, have you contacted them? Either you do something wrong or youve had the worst luck with it. Very odd.
9:41 What the hammer multi tool does do is let you hold the nail while keeping your hand safe, it probably isn’t the best way to do that, but it works.
I was wanting to say the same!
Different type of nail, but I've taken to using my old pair of aquarium tongs when the nail is too small for me to hold comfortably. I imagine a pair of needle nose pliers would work similarly.
the electric carver for a second sounded like Evan screaming, then the new bit sounded like Katelyn screaming, i thought i was losing my mind for a minute there!
this is exactly what i needed today, i accidentally slept through my last exam of the semester and i was so stressed out, the teacher is the best and is letting me retake it, but this video will be perfect for de-stressing, i love your videos you’re the best
The problem with the Drill Pump is that it is probably not self priming. So unless you get the water to the inlet of the pump first it is just going to spin and burn up the plastic.
I have the exact same pump from another store. You have to prime it and there is an RPM limit that a drill can easily surpass.
Had so much fun watching 😊
The first drill thing could work better if you flip the drill handle to the other side so you have space for your hand 💡
Still a piece of trash but I came to say the same thing. Maybe some instructions might have helped with that.
@@DemolishionistI guess common sense isn't that common anymore? "My hand is hitting the frame, how can this be :O"
How’d they not notice that?
My thought as well, but it is still a piece of crap.
i might've remembered it wrongly... but if you flip it wouldn't the thing no longer guide your drill?
You know a product has to be good when it has 10 words in its name.
Who needs a single snappy brand-name when you can make the title of your product just explain everything about it!
3:33 major "I wanna give you a zero, but that's not possible so I will give you a one" meme vibes
It’s the uncontrollable laughter for me . 😂
Hilarious . I didn’t know if I was laughing at the terrible tools or you guys laughing at the terrible tools .
This episode is one of my favourites because of the sheer ridiculousness . Those tools were bad!!! Ahahahaha 😊
The laughing fit at the absurdity of the triple hammer pliers screw drivers was worth every second of this video. Thank you guys!!! 😂
You guys were generous handing out those stars. I wouldn't have gone above a 2 for any of them.
e & k losing it over the hammer that is also a hammer and a hammer but also pliers and pliers is my new favorite piece of media
Yall should test cat toys to see if Joob likes any of them
The hammer/hammer/hammer multitool part killed my, yall had way too much fun with that one 😂
I use those pumps and they work great. Biggest mistake people make is they don't prime them. Not sure about that exact model but the ones I have make it very clear in the instructions that it should never be run dry.
OK, I'm the type of person who has to pause and read everything when it pops up and I'm so glad I am right now! I'm only at 0:06 and I'm already dying laughing because one of the 1 star reviews is "My wife left me after I bought this. Please come back Miranda." Then the next comment that came up is a 5 star review that says "So good I have a wife now. Say hi Miranda" !!!!
I love when people mess around in Amazon reviews, thanks for including it in your video Evan and Katelyn! I'm only 6 seconds in and I'm already having a blast.
I saw those too. Made me giggle 🤣
Watching you two absolutely lose it over hammer-hammer-pliers-screwdriver-hammer was so funny! Thank you for leaving the full laugh attack in!
10:38 Evan just failing words and nearly failing to breathe from laughter is my favorite part of this whole video
I love how the screaming chisel reminds me of our really dull woodcutter.
It literally sounds the same.
And yes it's also really really loud.
At first I legit thought they had put audio of Evan yelling over the electric chisel to cover the bad sound, but no, it WAS the bad sound
I had to relisten to Evan saying "I don't know what it's good w"like five times, what a good sound. 19:31😌
My favourite thing about your videos is Katelyn's editing!💛
With a little bit of modification, that drill pump is actually a really smart idea. Like people who own fish tanks have to do water changes, and that could make it so much easier! Or even filling a fish tank
I need just Evan and Katelyn laughing as a short. It made me laugh so hard my eyes were watering. Thanks!
Hi guys! I’ve just had a baby in November and I wanna thank you for providing me some much needed entertainment throughout this difficult time! I’ve watched you for a couple years now and I always find myself reverting back to your content. I must’ve watched each video 5x over 😂 hope you guys have a merry Christmas 🎄
The amount of tears I had while laughing when y’all burst into laughter was more than I expected when I first began this video. That was a joy and delight and nothing at all what I was expecting to happen.
Amazing as always haha 😂
I've been through some tough times recently, struggling with some loss. I'm so glad I found this channel, it's been really comforting to me. Your chemistry together and positively really helps my mood. Thank you guys so much!!❤
you guys are probably my favorite youtubers! i love the “not that type of channel” moments and the cozy ones as well. keep doing what you’re doing! ❤️
Watching you guys split your sides laughing over the multitool hammer, hammer, pliers screwdriver, pliers and hammer genuinely gave me life!
Watch these companies take photos from this video from your reviews and put it on their Amazon listings 😂
Fun video as always for you two :) I do believe you overlooked one major thing with the pump. most water pumps need to be primed (long story short air is compressible, liquid isnt, so a dry pump isnt really able to do much but once primed (flushed with liquid) the water is able to push/pull/move. I am really curious how the pump would have performed if used 'properly'. Did the instructions not mention anything about priming??
Pretty sure the slot in the concrete hammer is to put a blank pew pew ammo and strike it to ignite it. This sends the nail through concrete. Glad you did not do that.
That's insane if that's what they were going for
Dont know about the carver but the flex shaft rotary grinder is soo usefull! When you just quickly have to deburr or grind something
Absolutely this. My favorite tool from my goldsmith days.
When you started laughing I started laughing so hard my mom asked me if I was ok 😂.
I love your videos. They always make me happy. You are my favorite channel (all of them)❤
The multitool was really worth buying, laughing that hard is priceless :D
[10:44] I couldn't tell if Evan and Katelyn was laughing at Evan's back pain or how terrible the hammer/pliers were. 🤣
For your resin issue I suggest a peristaltic pump. When you inevitably get resin stuck in it you can just replace the tubing.
That purple/orange "Words are Hard" sweater really suits Evan! Great incidental merch plug :)
The multi-tool segment was the opitime of "the sleepy hahas." My face hurts sm rn lmao I hope you're feeling better, evan
10:30 Evan has fully transcended from dad jokes and has evolved to sweater dad with big shop glasses unable to stop laughing at his own jokes!
To anyone interested in the Flex Shaft. I actually highly recommend getting the "original" version of the Flex Shaft/Pendant Motor showed in the video, it's an incredibly useful tool, especially for small work like Jewelry making. It combines a small handpiece with a lot of power, for less power but more flexibility a "Dremel" is best and for even less power but absolutely amazing flexibility a "Micromotor" is best.... Under the Line, a Flex Shaft/Pendant Motor is basically a beefed up version of the commonly known Dremel Rotary Tool... The leading brand is Foredom, Dremel also offers a model called Fortiflex. Cheers
I could literally watch you guys assess amazon scam products all day long! This was hilarious!
What makes the hammer part even funnier for me is that my mum, only know the bare minimum of DIY, has bought every DIYing man in the family, and everyone has either stuffed them away never to be found or just straight up threw them away. My dad has at least 7 of them hidden away in a secret compartment in his car that only he knows about.
I laughed just as hard if not harder that Evan was!!! Do more of these PLEASE 💜💜
NGL I legit thought the sound from the chisel tool at 6:21 was Evan yelling “AHHHHHHHHH”🤣🤣🤣🤣🤣 like he even makes the same noise at 9:16🤣😂🤣
Honestly I think most people who are disappointed by their Amazon purchase is when they don’t read the product specification thoroughly, I for one am VERY thorough when I read it before buying anything!
Even If It’s a cheap product you should do fine😊
I'm sure everyone is going to/has already commented this. But Katelyn, have you tried drilling from a higher vantage point? I was taught to look at the top of the drill, so you can't see any part of the drill below it and not press down at all, just use the weight. For reference, my table is about mid thigh height.
i legit thought evan was screaming when i first heard the wood carving noise, it sounds like a soul in pain 😂
Somebody probably mentioned this already but some drills have a built-in spirit level. That's probably the easiest way to make sure you're drilling straight down. It looks like there are also stick-on levels you can stick on the back of your existing drill.
6:20 i looked away for like 2 seconds and genuinely thought that noise was evan screaming his lungs out lol, this machine sounds just like him somehow
I was going to comment the exact same thing haha.
As a Carpenter I couldn't stop laughing 😂😂😂😂😂at the"multi-tool" .
Cant wait to watch this later
The "weeds" you're trying to grab are baby trees.
The video was very fun to watch. Thanks for the entertainment.
the biggest problem of trying to pump resin is that it will clog at like 3 uses. It's not easy to remove from surfaces so it's absolutely pointless to pass it through a tube. Maybe with hydrophobic protection but not very hopefull about that eitther
The only thing I can think of to keep it serviceable is to pump _a lot_ of acetone after each use to prevent the resin from freezing up the pump when it cures.
But that would undoubtedly melt the cheap plastic in short order.
6:20 for a brief second i thought the noise the chisel was making was Evan *screaming* and was very concerned/confused. 😓
Bro, you two DYING at the hammer/hammer/pliers/hammer/screwdriver(?)/hammer KILLED ME 😂
Also, can we PLEASE get a 'Days since last Injury: X' counter?
All the way back in high school I had an art teacher that had us carving limestone rocks. It was so increadibly fun and I always wanted to get into serious carving after that. I never had tools or money, but a few years later a friend of mine showed me he was getting into wood carving. Wood carving was so much more difficult than rock carving because you had to really know how to control your hands. Which I did not! The rock carving was so slow and time consuming which is what made it appealing to me. The wood was too soft and every little nitch took out so much wood...I was left with little undistinguished knobs...
But I could TOTALLY see Evan getting into wood carving so the two of you could include it with your resin hobby ❤
Hey, I'm sure your knobs were perfectly distinguishable.
Don't let anyone mock the size of your knobs.
Wait... This isn't that kind of channel.
@DH-xw6jp sometimes though, it IS that kind of channel 😂
You two seem like such fun people to talk to
“Thinking quickly, Evan constructed a hammer using only some pliers, a screwdriver, and a hammer.”
I can’t wait to see your Safiya collab! You always make me smile!
The "brushing hammer workshop work" is one of my favorite long-running jokes of the channel. ❤
yooo is it just me or did yall step it up with the editing and transitions in the video?? absolute banger!! ❤❤❤
I own one of those drill powered pumps that I got at Harbor Freight for like $13.
It's great for the RV and for Camping, for pulling water out of the lake or river.
It's great for fast quick showers or cleaning things while on the go.
as a wise man once said: "everything is a hammer, at least once"
Evan laughing so hard it hurts his back… yeah I felt that 😂😂😂
I would have loved to have seen you open up the pump to see how poorly it was constructed from the inside and what exactly broke. Maybe you could still do it in a second channel video?
The fact that it’s a hammer 4 times but you still have to bring in an additional 5th hammer. I can’t. 😂👌
Holy crap, laughed soooo hard at this episode! Loved this one!
I stepped away from my computer to do some work and at the 6:20 mark I swore it was just Evan screaming. I just heard "Can I test it?" "How is it?" "AHHHHHHH" 😂
Im laughing so hard rn- During the wood carving tool I got an ad for an electric wood carver!
6:19 Oh my god, at first I thought Evan was randomly screaming to mess around, and then I realised it was the carver/wood, what the-
I felt for the drill and straight you could have come from the other side where he poles do not get hit with your hand. I am writing this mid point of that where it was stated there are no zero stars.
omg evan just lost so much at the hammer(5x) screwdriver (5x) thingy I cackled together
Been waiting for a video all day!
Best part of Fridays
For my work, I got that kind of pump. It was a slightly more "industrial" version of the pump, purchased at Lowes, but on day 1 of trying to use it, I managed to break the screw on plastic parts for the hose and had to go to Lowes to buy replacement parts. However, once I changed out the parts, it has worked fine ever since. I pump water as well as thicker liquids with this pump.
I did not like that the hose curls and therefore is hard to handle on your own. I zip-tied sticks to the ends of each hose to straighten them on, and, the torque created from spinning the blades in the pump means that the hoses will always be pointing in odd directions while you're using it.
I literally love you guys, everytime I’m bored or when I’m baking and need something to watch I would always looks for you guys videos.They are so entertaining and funny. Ps: love the editing
There is something so joyful about watching someone giggle till it hurts 😂❤
So excited! Does this mean Katelyn’s package ban has been lifted? 😂
no, now I have a secret christmas present package ban!
Lol, it’s the same at my house! Merry Christmas you guys!
I had this video in the background so I wasn't actively watching and I genuinely thought the wood carver for a moment was just Evan screaming
Me too 😅