im doing this with a John Deere LT160, ive already lowered it, swapped a manual transmission into it and swapped a Kawasaki FH491V onto it. This is an amazing build and an amazing inspiration.
@@ghoulish- its honestly not too hard, if you have a mower and they made the same style of mower with a manual, id buy a used transmission from one of those. for me, i used a 6 speed from a craftsman lt1000 and i had to cut holes in the body for a shifter so its not the cleanest, but you can do it with anything you have avabile
I’m a certified John Deere mechanic and I absolutely love it. I’m in the process of doing the same thing with an stx38, almost identical to the 108. The only thing I would caution is that without the fan shroud you’re running waaaay hotter than you need to be and are probably going to blow head gaskets or drop a valve guide if it hasn’t done so already. They run surprisingly well with a blown head gasket and dropped valve guide. Can’t wait to do this to mine. No
Had one made from an old cub cadet with a yz490j two stroke in it. Thing was wicked fast and Its what i drove to HS because i never got my license until after lol We didn't use much besides the body, frame, and controls. We got rid of the trans axle and it was turned into a chain drive to accommodate the new engine and trans. Turned the deck lift into the gear selector as well as mounted the clutch to it, making it a grip and rip, turned the brake into the throttle and the clutch into the brake. Thing was fun and could reach highway speeds with the gear ratio we had going on (I forget what the yz had going on but the rear was like a 20 tooth)
it handles well becaise of the front neg camber. dont let anybody tell you to change it... very nice work. the welds can be cleaned up. what matters it appears sturdy and looks like it rides great
I had an older JD riding mower from the 80s, cant remember the model #, when I was a kid in the early 2000s. My dad and I put a smaller pully on the transmission and that thing literally went 20+ MPH and could burn rubber and damn near pop a wheelie. About 6 months later the transmission was burned out haha.
that is one siiiiick mower! Hats off to your ingenuity and craftsmanship at such a young age. Keep up the great work and you will surely go far in life with your mindset and skill!
Awesome job to you both! When you nail it , it's just right. You have started a trend now, I think the world will see more of your creations if you stay in the game. Go with your design gut instinct and you will win.and
I don't mean to diss you but my old welding teacher from high school would have sent me back to home room if I showed him those welds! Seriously, it's all good if it holds.
That's awesome bud❤️🔥! Job well done👍🏻😃! Replace the pullys & belt with sprockets & chain & add a small racing wing to the back😁! Thanks for sharing. . . .be safe👌🏼
@mycustomgokart your craftsmanship will come in time. That little tractor is rad as hell brother. I built the two bicycles on our channel here when I was like 15-20 years old. Keep up the good work!
So with this could you retain a stock cutting deck and cut the lawns Cause I know it’s low but it looks low from the body dropping not so much suspension or frame low
WOW. How the f is that transaxle holding up that much time? Thats crazy. Not 1 broken gear since you swap? Is it getting hot after a while? looks like a beast, congrat :D
i do enginineering for trade so im not guna say much apart from as long as you have lots of fun that kind of all that matters and being your first build ...not to bad-ive seen worse😁good to see you've improved with each build, bravo young man👏👏👏
Easily the best looking low mower I’ve ever seen! My son and I are starting one this weekend, thanks for the inspiration bud.
Can you adopt me?
@@boiledtea479 lol😂
im doing this with a John Deere LT160, ive already lowered it, swapped a manual transmission into it and swapped a Kawasaki FH491V onto it. This is an amazing build and an amazing inspiration.
Hey I’m working on a John Deere 160 would love to get in contact on how you did some of the lowering stuff on your John deere
@@Popcorx who?
I am really new to cars and stuff so how would you switch it to a manual?
@@ghoulish- its honestly not too hard, if you have a mower and they made the same style of mower with a manual, id buy a used transmission from one of those. for me, i used a 6 speed from a craftsman lt1000 and i had to cut holes in the body for a shifter so its not the cleanest, but you can do it with anything you have avabile
I’m a certified John Deere mechanic and I absolutely love it. I’m in the process of doing the same thing with an stx38, almost identical to the 108.
The only thing I would caution is that without the fan shroud you’re running waaaay hotter than you need to be and are probably going to blow head gaskets or drop a valve guide if it hasn’t done so already. They run surprisingly well with a blown head gasket and dropped valve guide. Can’t wait to do this to mine. No
Had one made from an old cub cadet with a yz490j two stroke in it. Thing was wicked fast and Its what i drove to HS because i never got my license until after lol
We didn't use much besides the body, frame, and controls. We got rid of the trans axle and it was turned into a chain drive to accommodate the new engine and trans. Turned the deck lift into the gear selector as well as mounted the clutch to it, making it a grip and rip, turned the brake into the throttle and the clutch into the brake. Thing was fun and could reach highway speeds with the gear ratio we had going on (I forget what the yz had going on but the rear was like a 20 tooth)
Amazing build! Love the build it’s beautiful!
I just picked one of these mowers up for this same build . I'm not a very good fabricator. But I'm going to give it a shot
Thanks for the inspiration
The way to learn is to just do it.
cruising and drifting on it looks so smooth and flowy, Love the build!
This video has cleared up so many questions. Built one and I sorta sucks, but now I found a better one to build. Thank you for this video.
Im planning to do something like this so this is such an inspiration for me man
post updates! would 100% watch it g
yeah same upload that shit
The stance on this thing is on point!🤘🏻
it handles well becaise of the front neg camber. dont let anybody tell you to change it...
very nice work. the welds can be cleaned up. what matters it appears sturdy and looks like it rides great
Thank you for making a racing mower the way it should be made, garbage welds and all, keep up the good work!
🤣🤣🤣
It does not matter what the weld look like as long as it runs and you're having fun it's all it matters
I had an older JD riding mower from the 80s, cant remember the model #, when I was a kid in the early 2000s. My dad and I put a smaller pully on the transmission and that thing literally went 20+ MPH and could burn rubber and damn near pop a wheelie. About 6 months later the transmission was burned out haha.
All he did was put a smaller pulley on the back?
@@floridagirl386 Smaller pully and a shorter belt, yes. And it went incredibly fast.
Probably every guy in the comments checking fb marketplace for a JD 108 mower right now 😂
Can’t deny I havent looked
How did you know 💀
💯🔥💥I've got a old free mower and I can't wait to try this!! Thanks for the inspiration and great content!!! Totally epic results !!!! 💯🔥💥
that is one siiiiick mower! Hats off to your ingenuity and craftsmanship at such a young age. Keep up the great work and you will surely go far in life with your mindset and skill!
Just epic lads. Probably my favourite video of 23! Light hearted,good fun, nice build. Not sponsored??? Whaaat 🤷🏻🤣
that thing is just classy ^^
This guys gotta create like a kart shop. Kids brilliant.
This is a must-have for me and my son. Thank you so much for posting this video!
It's videos like this that inspire me to keep building. Now my craftsman is 1 magneto away from hitting 60 mph in its deep blue paint
Awesome job to you both! When you nail it , it's just right. You have started a trend now, I think the world will see more of your creations if you stay in the game. Go with your design gut instinct and you will win.and
I just got a free craftsman rider with a junk deck and bad solenoid. Might have to chop and lower it like they. My kids would love it.
Amazing build and creativity
dude i love this thing, how much would you sell it for if you did?
He’s not selling, just build your own!
@@apollo9277 hell yea
bro hes just asking
@@jamesplayz1233 and he was just answering…
Yeah, that’s a cool little rig you got their, gives me some great ideas for my own build!
A ton of dumb fun for short money. I’d call that a big win
I don't mean to diss you but my old welding teacher from high school would have sent me back to home room if I showed him those welds! Seriously, it's all good if it holds.
Y’all out here making history Fr fr
Bro I hope more people will find you from ig, this is lit af
Thanks man 🤟
It's Awesome! Don't take your buddy to seriously lol.. You gotta start somewhere. Let's see his build.
You're a good egg young man, more power to ya!
That’s a really sweet looking John Deere! I used to race lawnmowers and I miss it!
you can still build another one!
Working on my 12 year old sons first mower now. I pulled an old craftsman out of the backyard & it has the ic gold.
I’m just looking at my riding mower right now smirking. 😂 this is awesome!
That's awesome bud❤️🔥! Job well done👍🏻😃! Replace the pullys & belt with sprockets & chain & add a small racing wing to the back😁! Thanks for sharing. . . .be safe👌🏼
That's just flip'n cool right there !..........super sweet !
The mower rollers are so hard 😂
I think a 2 stroke dirtbike engine or like an atv engine would be pretty cool in that machine
So with the stock motor it runs that fast? Thought they were slow. Any advice on this would be a big help. Looking to start a similar project. 👌🏽
Top speed ? Governor? Awesome work !
nice job with that john Deere 108 drift edition 👍👍💯💯🏆🏆🤛🤛
We need this in mario kart.
That's rad man 🤘👌 makes me want to lower something to play around on
That looks like a lot of fun 😊
Awesome build! How did you lower the front end? I have a Deere 111 that Im putting a v twin in.
Awesome build man
i want to make on now so cool
👍
This is the first time I have ever seen bald tires on a riding mower !
just guys doing what guys do best
This dude just made a real life Mario Cart
Are you able to just flip the tractor transmission over and run it without issues?
That things sick I am going to buy a John Deere 108 with a v2 Kawasaki In it
Great work fella. We're gonna build one
Nice dude that’s awesome to hear🤘🤘
@mycustomgokart your craftsmanship will come in time. That little tractor is rad as hell brother. I built the two bicycles on our channel here when I was like 15-20 years old. Keep up the good work!
@@Shornandkenny hahaha that’s sweet!!
Your mower is pretty sick.. I race lawn mowers too
I’ve got a 20hp craftsman I’m making a racer out of and I am taking heavy inspiration from this.
Recommendation don’t break any bolts because you’re never gonna find a replacement part
pretty good investment! super cool story
Dang I seen shorts about this build an I always thought is was just a modified drift go kart with a John deer seat and cover
Thing looks fun as. Need to make one of my own
Bro , this is what all men and boys want . Its just my dream to drive it by myself and have a big fun 😂
thats a nice project. 100%.
My childhood becoming Mario kart!
So with this could you retain a stock cutting deck and cut the lawns
Cause I know it’s low but it looks low from the body dropping not so much suspension or frame low
WOW. How the f is that transaxle holding up that much time? Thats crazy. Not 1 broken gear since you swap? Is it getting hot after a while?
looks like a beast, congrat :D
Awsome build ive got a jd 110 side shaft mower i will do something with one day
I really like this one.
Awesome build. How’d you turn the deck lift into an e brake?
Its just a lever to pull the stock brake thats built into the transaxle
for our drift mower we rerouted the cable that raised & lowered the deck to the brake on the transaxle
Should definitely put some slicks on it
What was the stock mower… does it matter which one you use. If so what is the best?
Anyone seeing this, what engine would you recommend for the same 108 he has?
Such a beast
The real Mario!!!Bro!! Love it my guy
Could you make a video of how you lowered the front?
Belts are my weakness too bro still trying to figure out a chain system
OK question I have a John Deere 100 that has a three speed manual transmission. How would that work to turn into something like that
Shit boys we might have to meet up when I get my 111 done I didnt realize you guys were in Michigan, im just north of ya in Ontario
Amazing bro ! Just got one question, so u don't have break anymore ?
I mean u only have a hand brake now ?
Its sick bro! Is the trans axle locked
Is it available to purchase the 108 online? I’m having difficulties finding it and the closest I found is a 100.
That's amazing absolute ripper!
Hey, question what size Poly did you use to help you on the top end I'm in a process of making a 111 John Deere Racer mower. Thank you
You have a nice ass welder... 4 sure I would put a lil bottle gas on it and use unfluxcore but 2 each their own. lol
She's a beauty
i do enginineering for trade so im not guna say much apart from as long as you have lots of fun that kind of all that matters and being your first build ...not to bad-ive seen worse😁good to see you've improved with each build, bravo young man👏👏👏
Dang!!!! I love that Thing! 🎃
You should install a bucket seat in it
All stock motor?! No way! That’s sick 🔥
Yes way 😂
Pulleys 🤷🏻♂️
@masongetz3397 does the front pulley need to be bigger than the back? & is there a ratio I should be following for the trans to the front?
Thanks for posting this
The beginning was as random as my dreams
What a cool ride!
When he says pulley swap he means he swapped the crankshaft pulley for transaxle pulley for faster gearing?
Are you a rapper 🧐🧐🧐🤔🤔🤔.... I heard a lot of good freaking rap songs in your videos. Is it you 🧐🧐🧐🧐👌👍
Is your diff welded?? Also did you put grease or gear oil?
Well that looks extremely fun… *starts looking for a free lawn mower*
I now have a John deere 160 and an idea
Who do you replace those rear axles with? Just another one off of a different mower??
How much speed can you get out of a stock engine and the pulley system upgrades?
hey Good idea is to pot a Honda V-twin create engine in it for fun that would be something different
I have a craftsman body and a perfectly good running 1999 polaris rmk 500 that I am super thinking about sending it but winter's are so long in alaska
I’m just confused how is the trans axle being flipped not making you to have reverse as forward and all the forward gears reverse
Me too I don’t understand
Flip and rotate
@@kar21ol96 rotating it would do nothing flipping it changes the direction the pulley will spin so im confused on this aswell.
Very cool!