Exploring the Costs of a CROWN VIC SWAP: UniVic Cinematic
ฝัง
- เผยแพร่เมื่อ 2 พ.ย. 2024
- 3:49 information starts, Well guys this is the final product (it'll never be finished). If you haven't already, check out the build series! We hope you enjoy the knock out edit by Alex showcasing Sean's bad*** classic Ford.
▪️Don't you dare click this link 😳 - / @dailydrivendeathtraps
▪️Hey! 😁
Thanks for checking out our video, be sure to subscribe to see all our future content and wild builds!
Located in a small town of Iowa we hope to make this big.
Gear 🎥📷-
▪️Canon M50 w/ smallrig Cage
16mm Sigma lens
50mm w/ speed booster canon lens
Movo Hotshoe Mic
▪️GoPro 7 and 8+ many accessories
▪️Mavic Mini
▪️All edited by Alex in Adobe Premiere Pro
Music🎶-
▪️MusicBed
Cars🏎️-
▪️1965 Plymouth Belvedere
▪️1963 F-100 Unibody (2005 Crown Victoria)
▪️2014 Mustang GT
▪️Datsun 240z
▪️1975 Scout International
▪️1961 Ford Country Sedan Wagon (5.0 Swap)
▪️1973 F-250 Highboy (Cummins swap)
▪️1980 Honda CB650 (Cafe racer build)
▪️1974 Honda CB750 (1959 Harley Davidson rear end conversion)
▪️+ Many more that have yet to be featured on the channel
Why would you cut up a good unibody ford
Because
These trucks would just rust away if you left them, putting it on a new frame gives it personality, safety, and most importantly an exponentially increased lifespan.
Your truck good move what you have done
I might try a 3/4 ton. I know a few cheap ones here around Colorado.
Because he can good on him
Nice build, I have a 65 on an 09 that I drive most every day 45 minutes back and forth to work, it is hard to explain how much fun these trucks are to drive.
Thank you! That's awesome, it's basically Sean's daily on the nice days. Otherwise winter in Iowa on NITTOs is sketchy haha. Glad you liked the video!
3:49 information starts, still watch the cinematic we put some time into that haha! Understand if you're just here for info though, good luck with your builds!
I bought a parts car for my P71, and just sold the frame to a buddy that's doing this swap. I can't wait to see it.
Not what I was expecting but that intro was awesome!
This video has not been seen enough!! Awesome!!
✌️😎👍
Creamer first! Then add the coffee!
This is me hitting you up 😉
Nice work man, that is some insane patina!
Thanks! Wanna do a head to head sometime or collab?
It’s almost as if Henry was thinking ahead and imagining the possibilities! Awesome build!
This is such a cool video!!! I can’t get enough of these daily driven death traps... you inspire me to daily drive a death trap or two!!!
Thank you!!! We're glad we could inspire you! What's your death trap or dream death trap?
A Bumpside or dentside crew cab Cummins swapped FUMMINS! I have the motor just looking for the right truck. I love the highboy you guys did but I don’t really fit in a single cab...
I’m also obsessed with the crown Vic swaps and the coyote swaps as well.
@@Shermdoggydogg awesome! We hope you find the roller so you can start swappin!
I love 61-66 fords!
LOVE the IH pickup in the background at 5:27. I have a '54
We did some revival videos on it!
Excellent job you two on the project. Great editing and camerawork!
Thank you!!!
Nice truck, I’ll be starting a build soon, curious to know how you kept the Vic dash, and steering, was it just a matter of cutting out the f100 fire wall?
Thanks and good luck with yours! Yes we just cut out the firewall and dash. We wanted to keep the original dash somehow but was easier and faster just cutting it out. when we have more patience another time we'll try and keep the dash 😂
Just keep watching the series I'm sure it's in there somewhere when it's on the lift being lowered down, can't remember for sure but that'll give you a better sight.
@@DailyDrivenDeathTraps That’s awesome thanks for the reply, I’m definitely going to keep the cv dash…. I’d like the AC for the hot summer days…. Thanks again
I’m in the middle of a swap with a unibody myself…I have the same wheels I think as you …I put my wheels on to mock it up and I think the wheels fit without boar the center hole as you said in video…am I missing something or maybe I need to check and make sure…could use some feed back…also thanks for the inspiration
They are mustang performance pack rims. There are two widths of rims but that shouldn't matter for boar in the center so not sure. If they fit they fit tho and you got lucky haha
Thank you for your response.. I will check before the first ride for sure lol
Awesome build! I’m from the Knoxville Iowa area, but am stationed in New Jersey. I’m planning on doing my 64 Galaxie onto a Lincoln town car frame. Your swap looks fantastic and like it’s a great cruiser.
This is exactly how I wanna do mine
You 2 guys doing it 52 hrs
Me with no friends 😂 and just weekends 6 months .....
Hey as long as you get it done!
God damn that intro looked like it was straight out of a movie
Haha thanks man! I tried my best!
add another 50+ hours if you don’t have a lift &/or are mostly working by yourself
A lift and some helping hands really helps!
I’m 6’3, how tall are you? Do you have an issue with being comfortable in driver seat
Sean's 6'1 and he fits fine. It's comfortable but if it was any more close it wouldn't. We think less thick seats might help, but for now it's fine.
Some of the guy doing this are getting very good at it for me it's the wiring and don't know any thing about 4.6 I did crown Victoria front suspension and 5.3
Is the interior the crown vic too? Thats a problem i have with the mod, i would like to lower my ranger and give it better handling but i also love the interior
You could leave the interior too and convert it, just takes longer
@@DailyDrivenDeathTraps alright thanks
Idk if I'm gonna do this just cus my dad don't got much welding experience, much less me lmao would be a learning experience. Plus I'd have my very own "daily driven death trap"
@@RandomPerson-ob1hk if you've got a lift it's definitely possible, you can buy a flux welder for $300 or so off Amazon and practice before you do the real thing.
He must like coffee, I do too! 👎 God bless dude
What part of Iowa are you guys from ? I just picked up a 66 f100 this past summer I’m in SW Iowa
Hey! We're in Boone if you're familiar with that town!
@@DailyDrivenDeathTraps I sure do my sister in law is from there 👍
@@neighborsjason you should message us on either Facebook or IG some pics of this rig!
What did you put under the bumper to look like a spoiler / Splitter
Now this is a good question 😅 it's actually the trim plastic piece from the crown vic that goes by the rocker panel. It has the arrow indentations on it where the jacking points are 🤣
What size wheels and tires are you running?
I believe it's 255 squared on 19s
Do those front tires ever rub...?
One does because the fender is bent wrong, if it wasn't then it would be perfect.
You should get together with River City out of Ankeny Iowa. He did a nice UniVic
If he contacts us we'll definitely make a video together!
Great video. I see you're from Iowa? Where are you located? I'm from Des Moines.
Boone!
Feedback mr. Ty. 👍😊
Can you cover plastic dash with original dash ?,then i could put up with it😅
Yeah, there’s videos of people doing that as well. It needs to be done, do we have the time, not really 😆😆
Super clean!👍 nice video!
Thanks!!!
Supporting from Las Vegas , we are automotive youtubers check us out sometime fam keep up the hard work
@@DailyDrivenDeathTraps Your welcome! Definitely swing by and check us out! We just dropped our new website and more!
@@cre8tivegarage157 awesome! We'll definitely look at it!
love it!
have yall thought of welding a custom bumper together for the fummins?
Sean would really like to, especially a winch bumper, and a better looking rear bumper.
I need a hood for mine.everything else i can make or repair.
Paint it if you really love it!
Love your videos and builds man. I see you use a lot of similar headlight setups. Where are you getting them from?
Thank you, and yeah we love amazon headlights haha. Located in Boone county iowa
Shame that you don't drink coffee the way you should 😪😪 strong and bitter 😂😂😂😂
🤣😅 oopse
WOW another drama
Skip 4 minutes in if you dnt wanna watch a ridiculous stupid long intro
I see you're a subscriber. Sad you don't support the cinematics we took time to make and calling them stupid...