How to Install a Rear Power Socket for a Vauxhall Zafria B (no Sound)

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ก.พ. 2025
  • Zafria Installing a power socket in a empty rear hole below the ventilation unit.
    (my first video)

ความคิดเห็น • 17

  • @petert9097
    @petert9097 10 ปีที่แล้ว +1

    I have just done this, but didn't bother removing the ventilation grilles. I tested the socket before fitting it to the cover, to make sure there was power there. I also used part 13156391 instead of 13222794. That's the retaining ring with the hinged cover, the same as the one by the handbrake. Gives a very neat finish.
    Thanks for posting the video, it was very useful.

  • @Woodworker1947
    @Woodworker1947 ปีที่แล้ว

    Brilliant explanation - will a attempt doing it soon! :)

  • @niall3410
    @niall3410 4 ปีที่แล้ว

    Thanks for the vid man!

  • @Envy701
    @Envy701 5 ปีที่แล้ว

    No loom on my 10 plate elite. Not surprised though as its Vauxhall cost cutting at its finest. Will either run it from the boot fuse box or tap into the front ciggie lighter. I also drilled the hole to make it a little larger. This is to fit a 12v quick charge double USB charger.

  • @sparky27black35
    @sparky27black35 4 ปีที่แล้ว +1

    If there's no original aux /cigarette lighter connector that you can push into ! and you just have a blanking disc in it's place; then chances are this won't work because there's no wiring loom/wires to connect too.
    Buying the parts before checking first can cost up to £10.00. So check for wires first before ordering . I have a zafira b 2007 life and have found NO wires to connect too.
    Hope this helps a saves you a few ££.

  • @sajabdullah6927
    @sajabdullah6927 5 ปีที่แล้ว

    Loom was present , the loom if present can be felt through the hole and pulled out, to test Aux supply

  • @TheSaabdraken
    @TheSaabdraken 9 ปีที่แล้ว +3

    Hi all just got a 14 plate Zafira Design, I saw the video and tried to add a power outlet all fitted okay but no power, checked the fuses in the boot area, all appear okay. Is there a relay like the boot power outlet, any ideas?

    • @BruceWiggins
      @BruceWiggins 7 ปีที่แล้ว

      Robin O'Connor me too. Checked with multimeter, no voltage coming off wire

    • @310579stewart
      @310579stewart 7 ปีที่แล้ว

      Did anyone get a fix for this. I have installed the socket but getting no power

    • @andrewbowles9931
      @andrewbowles9931 5 ปีที่แล้ว

      Same thing here tried to fit a led USB port and no power to these wires !

    • @tylerbetts7777
      @tylerbetts7777 5 ปีที่แล้ว

      Did u get a fix for this I know it a few years ago was it just the need to add fuse in front

  • @scottishfanta
    @scottishfanta 7 ปีที่แล้ว +1

    Just bought the socket and the retaining ring. Tried to fit them to the back of the at but it doesn't look like I have the taped down wire to give it power. Anyone else experience this?

    • @mart2611
      @mart2611 7 ปีที่แล้ว

      scottishfanta Yes, same problem here. 1.8 2009 petrol elite and no rear console 12v loom to be seen any where. Suppose I should have checked first.

    • @col616
      @col616 6 ปีที่แล้ว

      Yes, just found I have the same issue. Did you resolve it?

  • @arturkochan4649
    @arturkochan4649 6 ปีที่แล้ว +1

    where do i get parts from?

  • @sein4018
    @sein4018 8 ปีที่แล้ว +1

    Only if the power cables are already present otherwise it's no help!!

  • @brianclarke1509
    @brianclarke1509 6 ปีที่แล้ว

    11 plate energy, has no plug or wire taped down because there isn't any.