Very helpfull and intuative video and great quality too. One thing though, please, please don't use those nasty "grip things" like at 0:04, get some propper spanner and not only will you find working on it easier but you won't round off all the nuts and bolts. Otherwise, great video and thanks for sharing it with us.
If I saw someone using multi grips on the injection line nuts instead of a 17mm spanner, or at least a shifting spanner, I’d give them a back-hander in the mouth and tell them to go buy some tools and learn how to use them.
I cringe just using a shifter on some parts of my diesels. Couldn't imagine using that thing. Better grips (self gripping things that were advertised on TV) I could just tolerate maybe 😂
Spanners are better than toothed pliers for nuts. Marked nuts do not look so nice and resale value drops fast. If he undid the nut on the pump and the nit on the injector, there would be no need to bend high pressure pipes.
Dear i have one question for you.....i have seen people modify a bottel jack for testing a desel fuel injector. Can we use this generator desel fuel pump to test the pop pressure of any desiel injector ?
Important safety tip. DO NOT put your hand over the injector while you're firing it. It WILL shoot fuel through your skin, and you do not want that. That is a horribly painful and disasterous condition.
Yea holly crap I was furious to see they are teaching people to check without talking about safety. He already removed the high pressure line could have easily relocated it inside a bucket or something by removing the return line. That's what I did on mine.
Hi I have a generator with a very similar engine to this one trouble I'm having is it is piping out of the intake when trying to start if you have any ideas what it could be thanks
Mine is running for about 5 sec then cutting off , I have bled top and bottom and have good oil ? Could it be my injector , less then an hour of run time it's new . I have been running once a month for 15 minutes, puzzled?
I have one of these engines in my generator. I bought it new but it has been sitting in its box for over 3 years but won't run. The fuel pressure from the pump is very weak and sprays nothing like yours did. I took out the pump but it looks clean and the spring pushes in and out OK. Is that a problem leaving it for so long do you know? There is a strong flow of fuel to the pump's inlet and no air locks and the battery is new. Anyone have any ideas?
Dear youtube, i have a similar engine (winsun type 192) as new but does not give proper output; Injection timing is okay, pump arm moves all the way to the right, but no smoke and bad cold start. I cannot find anything what causes the defect. Anyone an idea?
Thank You for the public service of making this video. I've subscribed. However, I have to say, I'm cringing every time I see you use those channel locks.
Buenas tardes patrón una preguntita inyectores para esos motores generadores de diesel dónde los puedo conseguir si es tan amable de decirme lo que pasa que tengo malo el inyector y no este no lo puedo conseguir la verdad yo soy de aquí de Tejupilco Estado de México
Mas sy pendatang baru nih masih kurang paham kenapa kalu di setarter kok ngg bunyi kaya yg di vido ini melain kan grutuk deg gitu ms apa peyebabny makasih sebelum ganti oli di star ok setelah gati kok susah setar sy pake oli B40 apah salah oli mohon suhuu keteranganya
Thank you for this super simple lesson. It is made to a deisel Ignoramoose can figure it out.... I am a deisel ignoramoose.... I can't even spell deisel right....
The very first thing we see is you putting channel locks on a plated bolt. Come on, Grade 7 shop students know better than that. Look at what it's doing to the bolts, they're already all chewed up. Awful; a how-NOT-to video.
What the hell kind of mickey mouse mechanic are you? Never, ever bend the high pressure fuel pipe, ever. You will weaken it and it could split at a later time. Don't be so lazy - undo both ends of the pipe and remove it. And get some proper tools for god sake, even for the sake of the video. Using pliers and locking pliers damages the fittings and is pure laziness. I sure hope you never get near any of my engines! Amatuer.
Very helpfull and intuative video and great quality too.
One thing though, please, please don't use those nasty "grip things" like at 0:04, get some propper spanner and not only will you find working on it easier but you won't round off all the nuts and bolts.
Otherwise, great video and thanks for sharing it with us.
❤❤❤
Never mind repeated the process of bleeding again and she is running now , thanks for the help!
Thank you for the useful explanation through which I was able to repair my generator
ha ha, I love the way you just pulled that out by hand. My M57 BMW engine will not let the injector go quite that easily I fear!
thnks alot its very usful
1. Use the proper tools for the job
2. Do not bend your fuel lines
3.They are nozzels not injectors
It's painful to watch
the whole unit is called an injector, the tip is the nozzle
Injector is the common term 🤷♂️
U nailed it buddy
Is it a turbine engine or something? It's an injector.
Great work❤
Buen video amigo.. muchas gracias por compartir tu conocimiento, me sirvio de mucha ayuda. mil gracias..
Pliers? REALLY???
Good job 👌👍😊
Wow Thanks your helpful video information 186FA p80 fuel injector the pest jenerator Japan technology
If I saw someone using multi grips on the injection line nuts instead of a 17mm spanner, or at least a shifting spanner, I’d give them a back-hander in the mouth and tell them to go buy some tools and learn how to use them.
I cringe just using a shifter on some parts of my diesels. Couldn't imagine using that thing. Better grips (self gripping things that were advertised on TV) I could just tolerate maybe 😂
❤❤❤
ارجوا تخصيص فيديو شرح يوضح فك وتركيب بابور او مولد الهربائ gam dog 11105 DB 18 حصان بارك الله فيك
How do you remove the valve stem seals? TIA
Hello from iraq well done
Spanners are better than toothed pliers for nuts. Marked nuts do not look so nice and resale value drops fast.
If he undid the nut on the pump and the nit on the injector, there would be no need to bend high pressure pipes.
I have this motor backfire really bad and blow white smoke can you help, It blew up the exhaust pipe so bad
Sir, do you have a video on how to fix the fuel injector?
Does diesel pump need to adjust timing while installing
What happens if the comparations can't take place in generator engine?
Dear i have one question for you.....i have seen people modify a bottel jack for testing a desel fuel injector. Can we use this generator desel fuel pump to test the pop pressure of any desiel injector ?
Great vid. Thanks 👍 I have the same generator. It's Pacini but identical.
Would you know where I would get a air filter for it?
how can I find out the diesel generator drops light
Important safety tip. DO NOT put your hand over the injector while you're firing it. It WILL shoot fuel through your skin, and you do not want that. That is a horribly painful and disasterous condition.
Yea holly crap I was furious to see they are teaching people to check without talking about safety. He already removed the high pressure line could have easily relocated it inside a bucket or something by removing the return line. That's what I did on mine.
Hi I have a generator with a very similar engine to this one trouble I'm having is it is piping out of the intake when trying to start if you have any ideas what it could be thanks
rough as barbed wire. Don't you own any spanners?
Is it possible to convert these to run a go kart I have a Keyed crank and the fuel supply adapter
With all the hammers and chisels in the world and you use a pair of channel locks on a fuel nut ? hahahaha
Porque se pega el descompresor del motor diésel cuando lo traen en el levas gracias
Mine is running for about 5 sec then cutting off , I have bled top and bottom and have good oil ? Could it be my injector , less then an hour of run time it's new . I have been running once a month for 15 minutes, puzzled?
Low oil
I have one of these engines in my generator. I bought it new but it has been sitting in its box for over 3 years but won't run. The fuel pressure from the pump is very weak and sprays nothing like yours did. I took out the pump but it looks clean and the spring pushes in and out OK. Is that a problem leaving it for so long do you know? There is a strong flow of fuel to the pump's inlet and no air locks and the battery is new. Anyone have any ideas?
I've got a multi power industrial equipment diesel power,how can you tell if the injector pump and injector are bad
Como sabes que motor esta fundido
in all fuel pump videos no one says anything about fuel pump pressure what or how much should it be ? How much valium or flow should I be getting ?
How to clean the injector/nozel?
Why a choke like structure on the head ?
lever opens the exhaust valve for compression release.
My high pressure fuel injector is leaking. How can I stop it?
how to najile cleaning?
Buen video, como se purga el inyector, porque si le damos a prender asi tiene aire en la tuberia y no va a prender nunca
وش سبب كثافة الدخان بعض الاحيان
إنه ليس على محركات الديزل الحديثة. يجب ألا يدخن الديزل على الإطلاق.
Dear youtube, i have a similar engine (winsun type 192) as new but does not give proper output; Injection timing is okay, pump arm moves all the way to the right, but no smoke and bad cold start. I cannot find anything what causes the defect. Anyone an idea?
Hi, do you know why the engine is sometimes running slow and rising up normal again? Thank you.
Hi what brand of generator is this. I have one that looks the same but it's red and I can't find the brand name
Brand name? It’s a Chinese, generic cloned, multipurpose, Diesel engine. It doesn’t have a particular brand name per say. It can be anything.
What the problem not passing disil in nosil pipe
Do you have a video on checking and adjusting the valves on these yanmar clones?
please use the correct tools...open end wrench not a channel locks
Or at least use the waterpump pliers *correctly* this video is filled with poor technique!
hello sir,..
i have a problem with my diesel generator, it blows black smoke.... how to fix it... tnx
Add a small quantity of petrol or automatic transmission fluid to your diesel tank now and again, helps clean the injector without removing!
Thank You for the public service of making this video. I've subscribed. However, I have to say, I'm cringing every time I see you use those channel locks.
om mau tanya tmpat bli selang saluran solar it di mana om🙏
Buenas tardes patrón una preguntita inyectores para esos motores generadores de diesel dónde los puedo conseguir si es tan amable de decirme lo que pasa que tengo malo el inyector y no este no lo puedo conseguir la verdad yo soy de aquí de Tejupilco Estado de México
2:15 what is the rubber line for, mine is disconnected and I don't know where it goes
It's feed back diesel line to the main tank.
Q marca es ese.motor.amigo.diskulpe
Have you ever seen anyone use brake lines as a fuel injector line?
Mesin seperti itu apa ada lobang ventilaornya?
My generator gets fuel up to the injector, but it refuses to fire.. and start :(
Mas sy pendatang baru nih masih kurang paham kenapa kalu di setarter kok ngg bunyi kaya yg di vido ini melain kan grutuk deg gitu ms apa peyebabny makasih sebelum ganti oli di star ok setelah gati kok susah setar sy pake oli B40 apah salah oli mohon suhuu keteranganya
how to nojel cleaning
use abbro injector cleaning agent put in to fuel tank dozzege is 50 cc per 4.5 ltrs-
❤❤❤❤❤
Thank you for this super simple lesson. It is made to a deisel Ignoramoose can figure it out.... I am a deisel ignoramoose.... I can't even spell deisel right....
分かりやすい！
تحية من العراق
Hey my engine is not turning over what you think is the problem. I tried to turn the engine with a wrench and no movement.
THANK YOU
Don't bend the injection line as it may not fit correctly if done repeatedly. It might get metal fatigue and need replaced over time.
Witch problem blue smoke
Engine repair manual books up Ka push ha price
My launtop diesel generator would not start an i really need some help.when u try to start it some white smoke coming out of the air breeder
Cómo se desarma la bomba de agua de un motor 18 HP kholer diesel
Sr buenps dias tengo un hrupo electrogeno kopor necesito el omjector y el filtto de airr es modelo 6700 o 5000
Por que se recalienta y funde los casquete es un motor de 13 caballos
ممتاز
@Bruno Figueiredo Keep your hands etc away from the spray, and don't test injectors when the engine is hot.
The very first thing we see is you putting channel locks on a plated bolt. Come on, Grade 7 shop students know better than that. Look at what it's doing to the bolts, they're already all chewed up.
Awful; a how-NOT-to video.
شرحك ممتاز بس لو ترفع صوتك أقوى
أسباب تهرب الزيت من الرس
i can't believe your doing this....please use proper techniques....
find a wrench
Leave it to your mechanic boss
U don't have 17 mm spanner
Hallo my friend...i need remove injector for kipor generator but not out he is defernt for you. Can you help my...send my you what's up
Yes
Seriously? Slip joint pliers on the B nuts? Have a look at the damage you are doing.
Hack
Watching those pliers go on a nut was painful at least use a cresent wrench
Avr generator yanmar diesel
يا ريت الترجمه العربيه
Your not a mechanic for sure plier is not a correct tool for tightening lock adaptor esp on fuel lines
Who needs wrenches when you have angle pliers?
It hurts me to watch you use pliers on the fittings!
What the hell kind of mickey mouse mechanic are you? Never, ever bend the high pressure fuel pipe, ever. You will weaken it and it could split at a later time. Don't be so lazy - undo both ends of the pipe and remove it.
And get some proper tools for god sake, even for the sake of the video. Using pliers and locking pliers damages the fittings and is pure laziness.
I sure hope you never get near any of my engines! Amatuer.
use proper tools first -
That I presume is a yanmar clone
Cuma begitu aja tau. Km kerjamnya lama
wow pliers ...... doh !
Bord Electronic Sestem
Poor sound quality
Si Buenas tardes Sí le Mi nombre es Armando no sé si
The most amateurish video on the subject I've ever seen! What garbage!
Bent the line wow I hope you don't present yourself as a professional.
Is that a Chinese clone of a Yanmar Diesel engine
Porque se pega el descompresor del motor diésel cuando lo traen en el levas gracias