Taking pride in your work is just as important as doing a good job. Chances are that nobody will see the cables, BUT you know it was done right. I like it!
Hey Mark, trust me, there isn’t anything like your videos out there showing how to do this with any level of detail like what you show in yours. Any videos that help installers in any way is much appreciated regardless whether they let you know or not. Some people aren’t real keen on saying thank you. I believe that people like yourself need and deserve the thanks you get. Most of these people doing this don’t have your positivity! You don’t get in a hurry like most!
As a former wire harness operator I appreciate your attention to detail brother. This is one of those trades where being nit picky really does pat off. 😂
We used to use this same technique when tying up wiring and hoses on our race truck.. the reason we did it this way was because of something you didn’t mention.. we did it because during a race, two wires or hoses held close together by a single zip tie will rub together because of vibration from the road or motor.. enough vibration and the hose or wire coverings can eat through each other, leading to a failure. Great job on your technique! You do quality work!
Do you ever get the feeling that someone is the best in the world at what they do? Like an athlete, or singer or whatever just by looking at their work? I think this guy wins in his field
4:18 I think your "over analyzation" is exactly why you should be in car audio. I have a similar attention to detail and I believe it makes a difference!
I use toe nail clippers for cutting cable tys. Been using them for 25 years LOL!!! When I first discovered this method I shared it with the lady's in our panel shop @ work. I bought them all a pair and they were so happy they didn't get all scratched up anymore.
Very Nice. As a Commercial/Residential pro A/V installer for 15 years I appreciate good wire trimming techniques. I've done large complex equipment racks and wired entire buildings. But I've never needed to use a flat ribbon style before. Props Mark! That is both clever and clean! Very impressive.
Thanks for the videos! You've given me the confidence to dive into audio and electronics and build a quality OEM+ set up. Going to properly do the "big 3" and upgrade the audio system! You make the learning painless with all your tips and lessons.
Thanks for always thoroughly explaining, and giving understandable instructions I am a newbie to this audio scene you make things make sense. Thanks for your contribution to the community.
Learn a lot about how to bundle wires in the aviation industry. It's nice to know how to bundle 100 wires together and put the 4in diameter bun db let through a 3in hole in the firewall of a plain or through the braces of the wings and the rest of the aircraft. Time consuming - yes, but its definitely worth it in the end
Incredibly useful technique. I started doing this and what a difference it makes. Thanks!
4 ปีที่แล้ว +1
The second method you showed is good for cornering from the floor or flat surface to the wall and then continue with the first method would be a good way to use it.
The cable comb method! Love doing this. Also, think about rotating the lock head underneath the comb instead of on top. IMHO it makes it more sano looking.
I know you have done this before, but I would like to see another build from beginning to end. I love details so being as detailed and OCD as possible would be great for me.
I want to see an in depth video on sealing at the b pillar for a wall. There's so many people that use different ways, that really don't explain it that well or seem like it's way more work than necessary.
Hey Mark, great video! I use a Glowforge laser to cut acrylic wire organizers that have simple snap-fit bosses for the wires. You can make them in flat or bundled or whatever profile you like, and can also solvent weld bases to them for double sided tape mounting!
Yes definatly would like to see the circle bundle, could you do a video on smaller wires where a zip tie may not work, ie wrapping a custom bundle, always wanted to know what product to use instead of nasty electrical tape.
I just installed my first ever amp and was told never to run RCA or speaker wire (ran new speaker wire) near the amp power wire. I had to because my floor has no hump and didn't want someone weight on the wire. So a good video idea is explain why and if you have to how to insulate the power wire from allowing power to "jump" to the RCA or speaker wire. Now to figure out where to mount the amp
He's mentioned before that you'd want to cross the wires at 90 degrees if possible. Think 4 way intersection as opposed to a two lane highway. I've done that before out necessity but had a lot of noise, and the sound quality suffered. I'd say if you don't have noise in your music don't worry about it.
@@cameltoast see I'm in a quad cab (suicide door) 01 Ram. I ran the RCA and passenger side speaker cable down the passenger side (under sill) and the power, remote turn on, and left side speaker wires down the driver side (under sill). I get no noise but do get kind of wonky at 32-35 on my Kenwood headunit
Question. I know RMS power is the wattage a speaker can handle without any distortion for long periods of time, but is this power rating the same at all frequencies? Is a frequency sweep done to a speaker and then an average RMS power is calculated, or is this the power the speaker can handle at any frequency it's rated at?
Woww, mark . I love all of your videos and really enjoy watching them . Thank u for this technique. Iam going to incorporate this to my new install . :)
Audison connection fused positive battery terminal is available where? Your other video doesn't have a link. Can I change the mini fuse than the one that is included?
Sweet video. I think a good video would be making a regular car trunk capable of handling a generic box install. All too often guys buy a box that fits into the trunk and jam it in their and call it good, while the box sits tilted over a spare wheel cover that's caving in. Addressing how to make a floor for the trunk to support the box and how to secure the box to it along with amp securing and such.
I sometimes use that technique with spark plug wires.If you geek out on gadgets like I do,Check out the KTI 76000 zip tie tool. Really handy when doing a lot of cable ties.
A situation I am dealing with right now is having a very small area inside my dash. Some tips on how to fit T harnesses and modules in a tight dash. Maybe showing how to extend the wires to relocate the module or something. Please help me with some ideas!!!!
This might sound weird, but I find the BLACK nylon zip ties last the longest. They make translucent nylon ones as well, but I have in several cases used them for automotive purposes and come back years later to have them be brittle. The black ones in my experience avoid becoming brittle due to fuel and oil exposure.
The pair I like that is listed in the video description is very inexpensive, one slip with a knife and you damage a wiring harness or the interior. If you are going to do things do them right.
I love your videos! Can you do a video on trunk side panel fiberglass boxes? Almost all of them are the same with a molded back, fleece stretched over a ring, and body filler to blend the side gaps. Noone does beautiful front beauty board panels that you're really good at to make them look factory. You did the jeep one, but that's a little too simple.
If the round bundle is made using the concentric twisting method used in motorsports, do it. I figured that must be it because of the flexibility you get while retaining the shape of the bundle
Question. Lets say im using 4 power runs from the front of my truck, connected to alternator going to the lithium bank in the rear. How would i go about running the wired along the frame and mounting them to where they wont be all saggy
Hi. I have 4 8ohm speakers and a 4ohm 4 channel amplifier.. what would be the best way to connect them? Would really appreciate if you can help me out. Thanks
This is great. The only problem with this would be for car audio stores. Little details like this take time. Time is money and most people aren't willing to pay the additional labor time involved in going to such great detail on ones vehicle, because they cant appreciate the extra time involved in details like this. At the time I think I was charging 55-65 an hour for labor. How many people you think are willing to pay an extra 120 bucks for 2 more hours of labor so we can work out the little details like this on their car. They arent. They would gladly have it for free, because it looks nice, but they have no appreciation for the extra time involved in going into such great detail, thus they arent willing to pay for it.
I'm not sure if you watched the whole video, but I made sure to mention this. One of my biggest pet peeves is how everyone seems to think a custom built one off sub box should cost the same as a mass produced $45 prefab. People have no understanding of manufacturing. The channel helps show how much work is behind the scenes that cost time and money. And there are people willing to pay for higher quality, the most valuable lesson I ever learned is not everyone needs to be your customer, if someone can't accept your high level of quality and pay accordingly, they don't need to be your customer, business works both ways. Has to be a win win.
Does it make sense to you that my new composet (Ground Zero gzuc 650sq-II) uses the - from the passive crossover to the + on the woofer? Thats what the wiring diagram tells me.
I am writing to you with great appreciation about a strange problem that happened to me, after I changed the factory speakers on an Opel Insignia, on the front doors I mounted a good quality Jbl and on the back doors some very cheap Akai, ok now the problem is that the sound of the rear parking assistant has become very low on volume , barely audible,in front where the sound came from those jbl's no problem sound is the same as it was I guess it's from the very low frequency response of the Akai speakers, if from your experience you can help me with an idea I would be very grateful
Other than using zip ties in place of proper wire lacing cord, nice work. I much prefer lacing cord as it is lighter, cheaper, nearly as fast and looks much nicer with no sharp ends to snag the next person who works on the harness.
I wonder why you have not discussed the method used in the 40s and early 50s? You use a very large grade of thread and use half hitches down the length interspersed with a weave design to keep the wires flat. The system works great and you can use any color of heavy thread in order to add or accentuate colors in the area you are laying the wires. The other reason to use this method is to add some chaffing protection to the wires when they go around some object or area that has the potential to chafe or cut the insulation on the wires and therefore reduce the chance of shorts or electrical fires.
Todo lo que este amigo enseña de gratis solo por ver sus vídeos! Hay personas que cobran fuertes cantidades por enseñarlos en los países como México por ejemplo ricardo Rangel en sus entrenamientos
Yes - absolutely want to see the round/bundled technique.
I would also like to see transitioning from the flat bundle to the round bundle for firewalls
Next video places
Taking pride in your work is just as important as doing a good job. Chances are that nobody will see the cables, BUT you know it was done right. I like it!
Would rather have it done right and nobody see it than done wrong and everyone seeing it. Plus you know it will be good for years to come
Hey Mark, trust me, there isn’t anything like your videos out there showing how to do this with any level of detail like what you show in yours. Any videos that help installers in any way is much appreciated regardless whether they let you know or not. Some people aren’t real keen on saying thank you. I believe that people like yourself need and deserve the thanks you get. Most of these people doing this don’t have your positivity! You don’t get in a hurry like most!
As a former wire harness operator I appreciate your attention to detail brother. This is one of those trades where being nit picky really does pat off. 😂
That’s how I have been separating spark plug wires for years. Really clean.
I was just about to say the same thing. 👌 People with Chevy small blocks have been doing this for years.
I just made a set of plug wires about a week ago and did this for separators. People that was there were amazed by it.
@@BigWill3855 nn
C k r
We used to use this same technique when tying up wiring and hoses on our race truck.. the reason we did it this way was because of something you didn’t mention.. we did it because during a race, two wires or hoses held close together by a single zip tie will rub together because of vibration from the road or motor.. enough vibration and the hose or wire coverings
can eat through each other, leading to a failure. Great job on your technique! You do quality work!
Any kind of wiring tips/tricks is beyond helpful. Everyone needs to know how to do things to the highest standard and what they should be expecting.
Do you ever get the feeling that someone is the best in the world at what they do? Like an athlete, or singer or whatever just by looking at their work? I think this guy wins in his field
Far from the best but doing my best to keep advancing. 😃
Mark DEFINITELY does high quality work! He's the best on TH-cam...
I've been watching your channel for years now and you always amaze me with your clean work. Thank you Mark for the tips! Keep them coming!
Yes...
Do the round wire bundle video...!!!
Keep em coming mark...!!!
💪💪👍
4:18 I think your "over analyzation" is exactly why you should be in car audio. I have a similar attention to detail and I believe it makes a difference!
I use toe nail clippers for cutting cable tys. Been using them for 25 years LOL!!! When I first discovered this method I shared it with the lady's in our panel shop @ work. I bought them all a pair and they were so happy they didn't get all scratched up anymore.
Very Nice. As a Commercial/Residential pro A/V installer for 15 years I appreciate good wire trimming techniques. I've done large complex equipment racks and wired entire buildings. But I've never needed to use a flat ribbon style before. Props Mark! That is both clever and clean! Very impressive.
Yeah I like knu konceptz that's what most of my wire is. I think they're very underrated idk why they don't get more exposure
Great job! Been using zip ties for years and never saw these techniques. I’ll definitely use them. Thanks so much.
u r really a talanted person and i love to see the round bundle
Thanks for the videos! You've given me the confidence to dive into audio and electronics and build a quality OEM+ set up. Going to properly do the "big 3" and upgrade the audio system! You make the learning painless with all your tips and lessons.
I agree! I always lay the tie head itself underneath so it’s hidden...AND so you won’t catch them with a finger/hand. 😊
This is awesome...i'm busy collecting equipment to redo my current system in my spark and will definitely be using this trick.
Yeah let’s get that round bundle video going! Great video and thanks for mentioning this level of detail isn’t something to expect on a flat rate job!
I used this technique for all my 0 gauge cables. Worked awesome. Looks really good
Another excellent video. Your overanalysis is just the right amount of analysis.
Thanks for always thoroughly explaining, and giving understandable instructions I am a newbie to this audio scene you make things make sense. Thanks for your contribution to the community.
Love you guys work I’m learning so much to the point i feel like a apprentice n wouldn’t mind working for the company
Great video. I'll be going through my install this weekend and incorporate these ideas for a better look.
Learn a lot about how to bundle wires in the aviation industry. It's nice to know how to bundle 100 wires together and put the 4in diameter bun db let through a 3in hole in the firewall of a plain or through the braces of the wings and the rest of the aircraft. Time consuming - yes, but its definitely worth it in the end
Incredibly useful technique. I started doing this and what a difference it makes. Thanks!
The second method you showed is good for cornering from the floor or flat surface to the wall and then continue with the first method would be a good way to use it.
The cable comb method! Love doing this. Also, think about rotating the lock head underneath the comb instead of on top. IMHO it makes it more sano looking.
Great video, very well presenting and explained.
Desperately needed to know this for my own personal install amazing trick ty sir!👍
I know you have done this before, but I would like to see another build from beginning to end. I love details so being as detailed and OCD as possible would be great for me.
Use some Zip tie mounts throughout the wire, then place a zip tie around the whole thing. Done!
Thank u I'm doing this right now 🙂... We need Genius like you .. 🙂👍
Definitely gonna use this when I rewire my amps or add a amp
I want to see an in depth video on sealing at the b pillar for a wall. There's so many people that use different ways, that really don't explain it that well or seem like it's way more work than necessary.
A video on how to use certain grommets for all sorts of car audio installations would be cool.
Hey Mark, great video! I use a Glowforge laser to cut acrylic wire organizers that have simple snap-fit bosses for the wires. You can make them in flat or bundled or whatever profile you like, and can also solvent weld bases to them for double sided tape mounting!
You can also use velcro. We use that for low voltage racks for a/v, fire, and security
Yes definatly would like to see the circle bundle, could you do a video on smaller wires where a zip tie may not work, ie wrapping a custom bundle, always wanted to know what product to use instead of nasty electrical tape.
great video Mark. I've been doing this with spark plug wires for years💪
Same way I run nylon fuel line when doing repairs on fuel line rot. Works great for anything round really
👍🏾👍🏾👍🏾 what about when you have a subwoofer enclosure how would you wire the box , how to???
I just installed my first ever amp and was told never to run RCA or speaker wire (ran new speaker wire) near the amp power wire. I had to because my floor has no hump and didn't want someone weight on the wire. So a good video idea is explain why and if you have to how to insulate the power wire from allowing power to "jump" to the RCA or speaker wire. Now to figure out where to mount the amp
He's mentioned before that you'd want to cross the wires at 90 degrees if possible. Think 4 way intersection as opposed to a two lane highway.
I've done that before out necessity but had a lot of noise, and the sound quality suffered. I'd say if you don't have noise in your music don't worry about it.
@@cameltoast see I'm in a quad cab (suicide door) 01 Ram. I ran the RCA and passenger side speaker cable down the passenger side (under sill) and the power, remote turn on, and left side speaker wires down the driver side (under sill). I get no noise but do get kind of wonky at 32-35 on my Kenwood headunit
Great tips man very clean work!
Question. I know RMS power is the wattage a speaker can handle without any distortion for long periods of time, but is this power rating the same at all frequencies? Is a frequency sweep done to a speaker and then an average RMS power is calculated, or is this the power the speaker can handle at any frequency it's rated at?
Woww, mark . I love all of your videos and really enjoy watching them . Thank u for this technique. Iam going to incorporate this to my new install . :)
This is good because according to wiring standards, you have to de rate bunched cables as their heat interacts. Best laid open in air.
Audison connection fused positive battery terminal is available where? Your other video doesn't have a link. Can I change the mini fuse than the one that is included?
While flush cutters are nice. I've been using a set of nail clippers and they work very well.
I would be interested in the round bundle, thanks for the cool video!
Sweet video.
I think a good video would be making a regular car trunk capable of handling a generic box install.
All too often guys buy a box that fits into the trunk and jam it in their and call it good, while the box sits tilted over a spare wheel cover that's caving in.
Addressing how to make a floor for the trunk to support the box and how to secure the box to it along with amp securing and such.
Nice tip I’ve always Struggle with wiring
I sometimes use that technique with spark plug wires.If you geek out on gadgets like I do,Check out the KTI 76000 zip tie tool. Really handy when doing a lot of cable ties.
what is the brand of the cabling /wiring (colourful ones) ? thanks
A situation I am dealing with right now is having a very small area inside my dash. Some tips on how to fit T harnesses and modules in a tight dash. Maybe showing how to extend the wires to relocate the module or something. Please help me with some ideas!!!!
Thanks Mark I like this method 👍✌😎🙋♂️
Cool video keep coming the good info.
Panduit tie wrap gun. Love mine
This might sound weird, but I find the BLACK nylon zip ties last the longest. They make translucent nylon ones as well, but I have in several cases used them for automotive purposes and come back years later to have them be brittle. The black ones in my experience avoid becoming brittle due to fuel and oil exposure.
A good substitute to flush cuts are a sharp bladed knife takes a touch longer but just as good
The pair I like that is listed in the video description is very inexpensive, one slip with a knife and you damage a wiring harness or the interior. If you are going to do things do them right.
Saw the thumbnail and liked
Love your page.
I love your videos! Can you do a video on trunk side panel fiberglass boxes? Almost all of them are the same with a molded back, fleece stretched over a ring, and body filler to blend the side gaps. Noone does beautiful front beauty board panels that you're really good at to make them look factory. You did the jeep one, but that's a little too simple.
That's where all the 4 gauge Kandy Blue cable went! Hey save some for us!
I don’t think I’ve seen a video of you doing it yet so how about a battery relocation to trunk with the big 3 upgrade?
Very helpful video. Makes me want to re-tie all my wires under the hood.
It's worth it bruh
@@buckyshowophe1319 I'm gonna today. Supposed to be 70. Perfect day to do it. I also have other issues I have to fix. Bass breaking shit.
I always do my Sparkplug wires this way
If the round bundle is made using the concentric twisting method used in motorsports, do it. I figured that must be it because of the flexibility you get while retaining the shape of the bundle
Yes. Another video please
Question. Lets say im using 4 power runs from the front of my truck, connected to alternator going to the lithium bank in the rear. How would i go about running the wired along the frame and mounting them to where they wont be all saggy
Wires*
Are you referring to running network cables in it industry as the round style?
Yes please show us the round bundle technique
Hi. I have 4 8ohm speakers and a 4ohm 4 channel amplifier.. what would be the best way to connect them? Would really appreciate if you can help me out. Thanks
how can i make a great point of ground to chasis please
This is great. The only problem with this would be for car audio stores. Little details like this take time. Time is money and most people aren't willing to pay the additional labor time involved in going to such great detail on ones vehicle, because they cant appreciate the extra time involved in details like this. At the time I think I was charging 55-65 an hour for labor. How many people you think are willing to pay an extra 120 bucks for 2 more hours of labor so we can work out the little details like this on their car. They arent. They would gladly have it for free, because it looks nice, but they have no appreciation for the extra time involved in going into such great detail, thus they arent willing to pay for it.
I'm not sure if you watched the whole video, but I made sure to mention this. One of my biggest pet peeves is how everyone seems to think a custom built one off sub box should cost the same as a mass produced $45 prefab. People have no understanding of manufacturing. The channel helps show how much work is behind the scenes that cost time and money. And there are people willing to pay for higher quality, the most valuable lesson I ever learned is not everyone needs to be your customer, if someone can't accept your high level of quality and pay accordingly, they don't need to be your customer, business works both ways. Has to be a win win.
Can I wire a 4 ohm sub and a 6 ohm sub together in a series?
Do you recommend buying a subwoofer that has 500 watt rms but only 77 db
Does it make sense to you that my new composet (Ground Zero gzuc 650sq-II) uses the - from the passive crossover to the + on the woofer? Thats what the wiring diagram tells me.
That's how my fosgates are wired
I am writing to you with great appreciation about a strange problem that happened to me, after I changed the factory speakers on an Opel Insignia, on the front doors I mounted a good quality Jbl and on the back doors some very cheap Akai, ok now the problem is that the sound of the rear parking assistant has become very low on volume , barely audible,in front where the sound came from those jbl's no problem sound is the same as it was I guess it's from the very low frequency response of the Akai speakers, if from your experience you can help me with an idea I would be very grateful
Great video idea! Next idea: amp racks WITHOUT a router or table saw or 3d printer please. In an SUV, attached to box, etc
That's for wood, but what about metal?
Other than using zip ties in place of proper wire lacing cord, nice work. I much prefer lacing cord as it is lighter, cheaper, nearly as fast and looks much nicer with no sharp ends to snag the next person who works on the harness.
Where do you buy your wire covers
Of course we would like to see
Yes please show us!!!!
I would like to see the round bundle just for the difference
Random question, but do under the seat sub woofers sound as good as behind the seat?
Pretty much hell no
"Over-analyzing things" like zip-ties...... I like you already!.....lolol Sparks in Daytona
Maven harness plugs, Rob Dahm used similar in his RX-7 build, i think you’d appreciate his video
I wonder why you have not discussed the method used in the 40s and early 50s? You use a very large grade of thread and use half hitches down the length interspersed with a weave design to keep the wires flat. The system works great and you can use any color of heavy thread in order to add or accentuate colors in the area you are laying the wires. The other reason to use this method is to add some chaffing protection to the wires when they go around some object or area that has the potential to chafe or cut the insulation on the wires and therefore reduce the chance of shorts or electrical fires.
😍🤤
More of this please
Awesome tips, I’m the same way, I have OCD
Yes we want round bundle guide
How is there not a feedback or other unwanted noise when putting ground and power cables so close to each other?
Waxed Lacing Cord, that's what I would use.
If you have a small pick you can open the zip tie up and reuse it instead of cutting it if you rip it too tight
If you want to see how to bundle large amounts of wires together look to the aircraft industry and you will see it at a whole another level.
Todo lo que este amigo enseña de gratis solo por ver sus vídeos! Hay personas que cobran fuertes cantidades por enseñarlos en los países como México por ejemplo ricardo Rangel en sus entrenamientos
nice video, just wanted to say it's even worse if the ziptie ends up damaging a cable after improperly cutting it