Any method can work as long as it can solve system of equations. but when system size increases, it is easier to solve matrices rather than other methods. Matrices can also be added to different software and answers can be calculated quite fast and easy.
Actually those two 6V sources aren't supernodes since it has a 10ohm resistor in between...and you just have to consider principle nodes rather than considering simple nodes...so here Q and S are simple nodes whereas R is a principle node...so you have R, 12V(I5), 12V(I6), P and Ground as principle nodes.
Yes you could say that in case of this circuit. But that would not be the case if any one of the voltage sources at the bottom had a different voltage. The purpose here is to show how to solve adjacent super nodes.
can you please upload loop law, star Delta, Delta star problem..
Soon to be done.
could u plz explain thevnins law
Surely. I will be doing a video on that soon. stay tuned.
Good way.
Thank you sir.
In the end the values of all currents will be solve without matrix or by using any other method, because it is little bit difficult.......... sir :(
Any method can work as long as it can solve system of equations. but when system size increases, it is easier to solve matrices rather than other methods.
Matrices can also be added to different software and answers can be calculated quite fast and easy.
Actually those two 6V sources aren't supernodes since it has a 10ohm resistor in between...and you just have to consider principle nodes rather than considering simple nodes...so here Q and S are simple nodes whereas R is a principle node...so you have R, 12V(I5), 12V(I6), P and Ground as principle nodes.
Better if you said Q=S
Yes you could say that in case of this circuit. But that would not be the case if any one of the voltage sources at the bottom had a different voltage. The purpose here is to show how to solve adjacent super nodes.
Not useful
Thanks for the feedback. Could you please point out how it can be improved?
Totaly wrong
Thanks for our feedback. Could you please explain where I went wrong?