Hi Anna, I am from Maharashtra. This video really gives satisfaction to see how the Heart of Bullet get assembled. Clean Parts, well explained and not in hurry. I really appreciate your efforts ❤️😊
Nice video and clear and easy to understand. I was expecting to see how you replace bearings in engine chamber. Anyway waiting for the next videos... Thanks.
Bro very simple. Thanks Plz make a vedio regarding clutch setting of old bullet. How to adjust the clutch and how much free play is required...... What is the difference between 3,4 and5 plate clutch for old model RE... Thanks
Very good question . Such questions make us do more research and in the process learn a lot. Can we add five set clutch plates in 350 cc? All these days I used to think that 5set clutch plates are for 500 cc. (In old model CI)
The clutch lever inside the gear box should have a play of 3 mm - 4 mm that can be adjusted by clutch lever adjuster present in the gear box or it can also be adjusted by using the adjustable lick nut in the clutch cable. In 350cc Royal Enfield comes with 3 plate assembly and for 500 cc it is four plate assembly. The conversion from 3 plates to 4 plates can be made in 350 cc by using 4 endurance friction plate and an additional plane plate. For 500 cc we have to use 5 endurance friction plate and an additional plane plate. The thickness of friction plate is lesser when compared to Royal Enfield original frictional plate, but as the number of plates is increased the performance is better when compared.
If we go for heavy crank, in top gear we can move in 15 kmph also we can move in fourth gear while ascending the slope without any gear shifting. But the will be a mild reduction in the mileage. A normal heavy crank weighs about 10.100kg
hi sir, my bullet(1996 model) is knocking in speed of 40kmph at 4th gear. Replacing it with heavy crank will the knocking stop? if yes then will it hamper my engine in the long run?
![[LIVE] : ONE ลุมพินี 68 | คู่เอก "พระจันทร์ฉาย vs โจนาธาน"](http://i.ytimg.com/vi/F3IM3w-XchI/mqdefault.jpg)
Hi Anna,
I am from Maharashtra. This video really gives satisfaction to see how the Heart of Bullet get assembled. Clean Parts, well explained and not in hurry.
I really appreciate your efforts ❤️😊
Nice video and clear and easy to understand. I was expecting to see how you replace bearings in engine chamber.
Anyway waiting for the next videos...
Thanks.
Good going 👍
Awesome sir
Nice video
I need more explanation of crank fitting like we have to place two bearings and washer and spacer etc how to do that
Super 👌👌👍👍
Could you post a link to store where I can get Enfield parts..I have 2006 Thunderbird.. Looking to fix crank issues
If possible, Please make a disassemble and assemble video of Diesel engine as well sir.
Nice video.
Wanted to ask whether i can fit the heavy one to my 1990 model.
The stock weight was 8.25
Can i fit this?? Any alterations needed?
What's the bearing number u have installed on timing side
my love old is gold
And I hv another doubt about two bush on two Crank side ? It's very confused me ??
Hello Sir Really Thanks for these videos , Can you make old wiring videos with explanation .
K I'll do it
Which bond should be used here? Grey or gel?
Bro very simple. Thanks
Plz make a vedio regarding clutch setting of old bullet. How to adjust the clutch and how much free play is required......
What is the difference between 3,4 and5 plate clutch for old model RE...
Thanks
Very good question . Such questions make us do more research and in the process learn a lot.
Can we add five set clutch plates in 350 cc? All these days I used to think that 5set clutch plates are for 500 cc. (In old model CI)
The clutch lever inside the gear box should have a play of 3 mm - 4 mm that can be adjusted by clutch lever adjuster present in the gear box or it can also be adjusted by using the adjustable lick nut in the clutch cable.
In 350cc Royal Enfield comes with 3 plate assembly and for 500 cc it is four plate assembly. The conversion from 3 plates to 4 plates can be made in 350 cc by using 4 endurance friction plate and an additional plane plate.
For 500 cc we have to use 5 endurance friction plate and an additional plane plate.
The thickness of friction plate is lesser when compared to Royal Enfield original frictional plate, but as the number of plates is increased the performance is better when compared.
No oil used for assembling. No packing adhesive as well. How?
Sir mere royal Enfield old std model main 0.20 ka pistan nikla or vo smoke utha rahi thi to ab main bore kara lu 0.40 ka ki kit change karu
Or 2 questions ye h ki mera piston 3 ring waha nikla hai to main usi block main 5 ring wala piston bore kara sakta hu pls Reply sir
Hi brother ! How to increase crank weight ?? Can u explain about it and how much cost will come for that work , all about it pls ?
Make video on ac ,dc cdi wiring alternator and cid unit self repair
k...
@@ECFixeljin waiting for video
What are the perfect crank weight
For slow speed and high speed running and also depend mileage..?
If we go for heavy crank, in top gear we can move in 15 kmph also we can move in fourth gear while ascending the slope without any gear shifting. But the will be a mild reduction in the mileage. A normal heavy crank weighs about 10.100kg
@@ECFixeljin mild reduction in the mileage is not a big problem.! What is your opinion Maximum crank weight we can do for better ?
Neat wirker
How do you colour those engine parts
By brush or spray paint
Spray paint
can we install 10kg 2005 old model crank in 8kg old model 2001 case without any changes??? if any required changes than which changes we have to do
Little bit of engine chase cutting
@@karthiks6326 from which side brdr? We need to cut
Sides inside the case to accomodate extra welding on crank to make it free
Mine 1999 model bullet wanted to add crank weight, can add upto 12.5 kg
But 10 is stantard
Sir i have 2001 model standard which have 8 kg crank weight .i wants to replace it with 71 model crank .it would be better or waste of money?
Yes it's better for slow speed
@@ECFixeljin thanks for ur help
hi sir,
my bullet(1996 model) is knocking in speed of 40kmph at 4th gear.
Replacing it with heavy crank will the knocking stop?
if yes then will it hamper my engine in the long run?
How the engine case painted?/ Buffing?
Painted
@@ECFixeljin which paint we can use? Paint with heat resisting property?
@@jobinvellarithodi Better go for power coating
Thank you so much
Is need Crank side play ? Bcoz my bullet's engine has side play it's some more ...?? Pls reply brother ?
Which side you have play?
@@ECFixeljin -Both side ☹️
@@ECFixeljin -and how much but sh will come on both side ? Pls
Keep the crank rod at center and measure the play in both sides and let me know.
@@ECFixeljin -Ok brother
Can u help me brother pls ?
Sir in this crank how much washer are there
Which side?
@@ECFixeljin both side sir
Right side how much washer n left side how much washer
Timing side - washer + bearing
Clutch side - washer+ bearing+ distance collor
@@ECFixeljin Thanks sir
Sir nat bolt all new ha plz tell me
Yes
Hi sir, how to clean engine case
Outerside buffing. Innerside normally I use kerosene to clean followed by water then dry it.
Ok
Diesel bullet
Bro Wat is the cost for g2 bullet engine full restoration ??
Engine alone?
EC Fix S only engine
@@ECFixeljin engine and gear box
crenk hevi wali hai sir yaa light wali hai
Heavy 10.1kg
@@ECFixeljin thenks sir
agar sir purane old bullet ka spear part parches karna chahe to mill sakta hai compny say genuane riplai plz
Which year make is the engine?
1996
Okay but crank shaft looks like 10.5 kgs have u changed it
No. it's come with 10.5kg crank. limited edition Thunder bird lightening 535cc
Sir in last video... You provide me a web site for bullet parts... Is the product they send are genuine?
I don't know. But the packing is like original. Rate also same as original which I have bought from my place.
Okkk sir
What is the website
Pls rply sir
Which year mfg bullet is this...?
1996
@@ECFixeljin looks like its a heavy crank, does 1996 bullet has a heavy crank..?
No. It's altered to heavy Crank
@@ECFixeljin Thanks for your help and good to know....
@@ECFixeljin much appreciated..
Sir hindi me nahi ho sakta kya
Sir hindi me chalu kro aap ka work hand parfect hai
Sir hindi ma bol kar video banyo na kai ha na English samjh ne anda