Martin is such a great Dad helping you out when you need him. Along with the Father, Son banter. You are a credit to each other, very entertaining and informative. Looking forward to more of your videos.
Father and son working and laughing together and enjoying that bond I've got three sons and I love it when we are all are together working and helping each other out plus like Martin said a break for a cuppa great video again both keep us entertained with these how to do videos bit cold to be working in the poly tunnel tell ya Dad lol Rob
Used to strip my forks down now and again when I raced Moto X, but alway needed my mechanic m8 to guide me as always got stuck on some part of deconstruction or reconstruction tricky 😜
Bought a 1987 Suzuki RG 125 8 months ago. Had to leave my forks with a local guy to get them dismantled. What a seige that was🙄🙄🙄 Giving me a push to get mine done👍🏼
Gazer Love the shine I got rid of a suzuki 100trial bike some years ago cause forks were barely pitted now with the net u can just get replacements how times change ur doing a good job mate Phil in stoke
great video gary lad .............ohhh and martin lol ....here martin, does sharon know ya batting for the other side pmsl lol excellent video guys, BIG THUMBS UP
there looking good bud. also you can put a broom handle inside the fork to hold it to get the bolts out. also if you get stuck have a look at hunarscoalshed he does a tzr fork rebuild it helped me when i done mine.
The apprentice being rescued by the master. 😂 Oh dear think that comment about mick might bite you in the backside😂 Will you be test riding if after if so you’ll have to get your dad to put some stabilisers on it for you 😂
Hi Gary Martin you guys should work together more often as not laughed as much ,nice touch in these difficult days Oh don't be to hard on the old fella 🤣
Forks look bent, also tap screwdriver in were pinch bolt goes and they would of come apart by hand as you are hitting cast with a hammer. Which is never good.
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
I hope you enjoy this video and please comment.
I miss working in my dads shed on push bikes motor bikes with him watching you is like me and my pops brings back memories and a big smile on my face
👌👌
Martin is such a great Dad helping you out when you need him. Along with the Father, Son banter.
You are a credit to each other, very entertaining and informative.
Looking forward to more of your videos.
Cheers bud 👍🏻
Father and son working and laughing together and enjoying that bond I've got three sons and I love it when we are all are together working and helping each other out plus like Martin said a break for a cuppa great video again both keep us entertained with these how to do videos bit cold to be working in the poly tunnel tell ya Dad lol Rob
It's actually warmer in the polytunnel than the log cabin 👍🏻
Well done Martin it’s always nice to see farther and son working in harmony
Cheers William 👍🏻
Awesome job Gary, you two really did good. Take care
I think what you and your dad are doing is fantastic, Keep up the good work 👌
Cheers Jim 👍🏻
It’s great to see you and the old man working as a team , it’s like night & day with n without the polishing .👍 great job bud
Thanks Paul 👌
Great job Gary hope your family are all well keep up the good work enjoying your channel
Thanks Justin 👍🏻
Excellent work on polishing the forks. Really looking forward to seeing this wee bike finished
Me to bud 👌
Used to strip my forks down now and again when I raced Moto X, but alway needed my mechanic m8 to guide me as always got stuck on some part of deconstruction or reconstruction tricky 😜
If I get stuck il watch the video back 😂👌
@@ProjectMan it's going to be my go to vid if I get involved in any front end again nice work 👍
Get yourself a little project to have a Tinker about with 👍🏻
I think the old man's drawing up a contract for appearance money Gaz 😳😳 good work bud keep it up 👍👍
Cheers ade 👍🏻
Lad n Dad work well together!
Cheers Paul 👌
Good team work guys the forks came up really nice 👌
They did mate 👍🏻
Bought a 1987 Suzuki RG 125 8 months ago. Had to leave my forks with a local guy to get them dismantled. What a seige that was🙄🙄🙄
Giving me a push to get mine done👍🏼
Good luck 👍🏻
@@ProjectMan cheers
What a pair (and I'm not talking aboiut forks). Great video mate. I had a right chuckle with you and your old man there. UNBELIEVABLE!!
Cheers bud thanks 👍🏻
great... you two make me laugh .....🤣 team work makes the dream work, well done they look great.
Thanks 👍🏻
Good old dad coming to the rescue
Cheers Roy 👍🏻
You and your dad are hilarious together!
Thank you 👍🏻
Having taken a few forks apart...before dismantling anything...first step is to get that Allen bolt undone....rest isn't usually a problem
I had an XJ600...and I bought the special tool...to hold the inside...while undoing the Allen bolt at the bottom
We were making do with what we had mate 👍🏻
Great job gary Martin might be the old man but he's got experience 👍👍👍👍
👍🏻👍🏻
nice work with the bench grinder sander gary
Cheers mate 👍🏻
Gary you legend! Thank you for all the support you’ve given me! Don’t mean to brag but I’m over 100 Subscribers! Wooooooooooooo
Well deserved mate you got some great skills there 👌👌
They look a bit bent Garry those cylinders
I used a Sash Clamp Set...used for Windows...to compress the fork..to remove that top clip...on the scooter forks
Nice 👍🏻
Looking tidy you will soon have the bike done,thank god for dads to
Cheers bud 👍🏻
Gazer
Love the shine I got rid of a suzuki 100trial bike some years ago cause forks were barely pitted now with the net u can just get replacements how times change ur doing a good job mate
Phil in stoke
Cheers Phil I have seen some new tubes available 👍🏻
Good job, so can you tell from your experience how much oil each bar has and the size of the seals? Thank you
I wish yous all the best with it relatively simple and straight forward cleaning job I'll stick to britannia motorcycles 😎
👌👌
silicone grease works wonders on removing rusty forks from triple clamps
Gary you could laquer the bottoms of the forks you just polished up as long as you use 2k laquer 👍
Yer I will be ash 👍🏻
@@ProjectMan nice one 👍
Thanks for the shout out Gary, keep doing what you do, love it
Thanks again Steve 👌
Always use some wood packing when removing the seals and
bushes or you mark the top of the fork tube
We got managed to not damage 👍🏻
One of the forks looks bent gaz. Might just be the camera. Look cracking polished up though 👍🏻
Yes it is bent bud 👍🏻
great video gary lad .............ohhh and martin lol ....here martin, does sharon know ya batting for the other side pmsl lol excellent video guys, BIG THUMBS UP
Cheers Andy 👍🏻
Pop loves it.
You really need to get a restraining order out on the old boy, Gary. 😂😂😂😂
😂😂
Very useful thanks
Great work!! both of you. 👍😀
Thank you 👍🏻
Broom handle with a point on is a common method for holding the damper rod....
Enjoyed that mate and a good laugh too cheers 🍻 👍
Thanks for watching 👍🏻
Remember to hold stick your tongue at a 45 degree angle when taking fork seals out, or you'll never get um out.
Great video Gary, you two do make me laugh ,sure you two could do a channel together project man and soppy man.🤣
😂😂
there looking good bud. also you can put a broom handle inside the fork to hold it to get the bolts out.
also if you get stuck have a look at hunarscoalshed he does a tzr fork rebuild it helped me when i done mine.
Cheers bud il check that out 👌
You 2 do make me laugh. Great video
Cheers Joe 👍🏻
getting the bolt out of the bottom a broom shank works every time
Cheers bud 👍🏻
Unbelievable Martin lol doing the hard work again for garry.Has he got his own workshop
😂
I think sometimes your dad forgets it’s your channel 😂 brilliant video mate 👍
I think your right !😆👍
stickers came in the post yesterday thanks gary and martin to
Cheers Dan 👍🏻
The apprentice being rescued by the master. 😂
Oh dear think that comment about mick might bite you in the backside😂
Will you be test riding if after if so you’ll have to get your dad to put some stabilisers on it for you 😂
Stabilisers behave your not on your push bike now 🐦😂
No be much good at the Banger track Jason lol 😂
Ali
About as much use as a chocolate fire guard 🔥😂
Sorry Garry I commented before watching it all
Great job mate haha Micks mowers 😆👍
😂Cheers Ash 👍🏻
Great video Project Man👍
Cheers Rick
Hi Gary Martin you guys should work together more often as not laughed as much ,nice touch in these difficult days Oh don't be to hard on the old fella 🤣
😂😂 Cheers martin
What's the tune called when you put it on timelapse? I love it lol
I think its called sand castles
@@ProjectMan thanks mate.
Oooo friend 😆😆
😂😂 Friend
Gary
Your dad will be on the phone to Boris
And having you chucked out of that bubble
Only joking mate stay safe 👍
😂😂 Cheers Phil 👍🏻
Hi gary not done forks b4 but one look bent mite be me but just saying mate
Yer it is mate 👍🏻
Haha sorry gaz i message you b4 id seen all the vidio haha
😂 No worries mate
Forks look bent, also tap screwdriver in were pinch bolt goes and they would of come apart by hand as you are hitting cast with a hammer. Which is never good.
Fork is bent 👍🏻
🤔👍👍👍👍👍👍👍
It was a forking job mate 😂😂
😂😂
Forks are bent mate