It will be interesting to see you rebuilding the engine in frame ! I need to the same to my cummins.... you can come over to the south of France and rebuilding my engine. If you have some spare time..... 😅
Here's the overdrive unit, we'll tear that down in a minute.... never tears it down. Here's the valve body... doesn't do anything else with it. There's the last piston in the case. Ok we're done. As he's thrown shit everywhere. Good video. Let's see you clean it up and put it back together and then see it working.
You make it look so easy one of these days I'm going to buy me another Dodge Ram a 98 and probably going to put a Cummins in it keep watching your videos all learn something bring them out
Absolutely enjoyed this video, definitely hope to see more videos like this. Was a pleasure to see you work and would enjoy seeing an assembly video. Keep up the great work
Cold start my ass... it’s 34 degrees here so I have to use my remote start to get those leather seats and steering wheel warm to run to Taco Bell been drinking since noon... woohoo sideways fun👍🏻
Tearing down is the only thing I hate about rebuilding a transmission, it will leak and puke fluid everywhere until the last piece is out of the case. My favorite part is putting together, all new clean parts, just a film of clean trans fluid on your hands.
There is drawbacks to dodges and Ford I burnt up 2 transmissions on my 5.9 with only about 75000 miles on it altogether My Ford has a 160000 with the original transmission Ford and Dodge needs to get along and just make fun of Chevy in their duraturd's
Wish i had more than a dollar to my name to buy a vehicle, but ill never have anything nice. I'd love to buy the white Dodge, but it is worth way more than the dollar in change that i have.
Damn man you make that look easy. Great job with the videos and all the content you put together I know it takes a lot of time and I want to say thx cause enjoy watching. Anyways I'm about to attempt my first rebuild on my 2003 cummins with a 48re, not much power maybe around 400 hp daily driver. What is a good rebuild kit to go with ? I'm a broke bitch so I'm looking for the best bang for buck. I know ur busy, but any helpful info would be greatly appreciated. Thx again.
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
im blown away at how fast you tore it apart thats impressive!
That was probably the fastest tear down I've seen yet
That 1st gen is a good looking truck
It will be interesting to see you rebuilding the engine in frame ! I need to the same to my cummins.... you can come over to the south of France and rebuilding my engine. If you have some spare time..... 😅
Bruce Wilson no probs I will find ya some cheep tickets 😜 haha
Good video Brucie
Awsome vid ur good at what u do
Be sure to replace the Valve body while you are at it !
My guess for next big purchase (if not a new shop): 2020 5th gen Ram Cummins
Great channel brother
Aj from the sopranos is now a diesel mechanic
Hope your dad is ok.please do a rebuilt video would love to see one
Nice 👍🏻
Here's the overdrive unit, we'll tear that down in a minute.... never tears it down. Here's the valve body... doesn't do anything else with it. There's the last piston in the case. Ok we're done. As he's thrown shit everywhere. Good video. Let's see you clean it up and put it back together and then see it working.
Model 94 Shiftier eh Nice
If you come to Vegas I'd love a ride in the flatbed lmao
Man thank You so much Bruce for the trnsmission teardown
Assembly plz👍🏽
Thanks for showing us the tear down. Time to do some rolling burnouts in the flatty!
Use the white truck as the giveaway truck.
In the north is getting ready to be between 40 and -20 for the next couple months were I'm located.
You make it look so easy one of these days I'm going to buy me another Dodge Ram a 98 and probably going to put a Cummins in it keep watching your videos all learn something bring them out
For sure want to see an assembly video of the trans
It takes alot of skill to work on transmissions like that. That an amazing job.
keep up the great content!!!
cold start in FL? my cummins starts fine in 20 degrees
you made a powerful truck, that has a harder time starting than a rotary engine.
Ricardo The PC Wizard it’s a decompressed diesel.... they will always struggle to start.
I’d be interested in your 4x4 7.3. Please give me a shout on it!
Definitely a assembly video
Thanks for the content Bruce! Keep up the good work!
Please do a detailed assembly of the 48re.
And 47rh
also a 47RE rebuild
48re is the best dodge auto🙌🏼
What happened to the 2nd gen mud truck?
Holy shit, I can smell the burnt ATF+4 through the screen! Lol
What paint code is the flatty? I’m in love with it
Come up to South Dakota where it was a freezing 17 degrees this morning and try to start that
Definitely get the detailed assembly video!!
Dodges and Fords with the diesel always eat automatic transmissions.
Holy shit the dash is there!!!! Can I please buy your dash board!!!
Yes I agree a assembly please
Awesome video definitely need an assembly to go with it🤙
We all want and need a assembly vid
What about the overdrive housing
Absolutely enjoyed this video, definitely hope to see more videos like this. Was a pleasure to see you work and would enjoy seeing an assembly video. Keep up the great work
Gotta love the flatty
Here for assembly video!
I hope your dad is ok 🙏🙏🙏🙏
Cold start my ass... it’s 34 degrees here so I have to use my remote start to get those leather seats and steering wheel warm to run to Taco Bell been drinking since noon... woohoo sideways fun👍🏻
Dude assemble on video please
Lol cold 71 try and start it at 15 out
72 is not cold in Ohio it gets cold in the winter
Please show the assembly
Can we see the assembly ?
Would like to see it go back together that would be great
72 degrees haha I’m trying to rust proof my truck and can’t feel my fingers!
Finally up to 30 degrees in Nh
The tear down video was badass. Really looking forwars to the badass assembly vidja.
Assembly vid plz!
06 swap the front clip on ur white truck
SNATCHED 👌🏻
Omg the flatbed is sweet!!!
So good and informative. Bruce tears down a transmission faster than I tie my shoes. Please make an assembly vidjuh!
Loved this video please do more like it and assembly video!!
Typical dodge transmission is burnt up? More like Cummins can break anything that you put behind it!
back together please
That's the kind of video I like to see.
Please do assembly video.
Heck assembly video for sure.....see ya at ole cleeter skeeter’s event bud.....content is great
I wouldn't show the assembly video myself. Let them figure it out. Bunch of hacks...
I vary much be interested in the 05
need an assembly video asap
How much do you want for the white Dodge???
Tearing down is the only thing I hate about rebuilding a transmission, it will leak and puke fluid everywhere until the last piece is out of the case. My favorite part is putting together, all new clean parts, just a film of clean trans fluid on your hands.
Do a vid of that inframe over haul!
How much for the white truck
Be nice if my hat that my wife ordered 5 weeks ago for me would show up, not going to lie I'm starting to get a little pissed off!!!!
I’m with everyone else it would be nice for a assembly video
Anyone else bothered by the mix the bolts together technique...
rebuild video!!!!
There is drawbacks to dodges and Ford I burnt up 2 transmissions on my 5.9 with only about 75000 miles on it altogether My Ford has a 160000 with the original transmission Ford and Dodge needs to get along and just make fun of Chevy in their duraturd's
Where’s home girl with the obs?
Trade 97 obs 7.3 for the white cummins?
72 its 37 here in michigan i wish it was 72 here
Come on brother hook us up with the vidja
Lmao 72 degrees is warm for us in Illinois.
Amen
Yeah hahaha that isn’t a cold start
I feel ya in northern il
Yep, central Illinois here.. lol
14x4nut yup Springfield is about 30 mins from me
Freezing 72°???
Try 14°f and feels like 2°f. I'll take your 72°
Says its getting cold at 78 degrees, Me - living in Ohio its already 43 degrees average
Whats up with the 2nd gen sport at the start of the video.
Love ur videos man
I do not like the stack. Honest opinion. Should drop it right before the left rear tire.
Who even drops there exhaust in front of the tire what inbreeding crap is that😂😂😂
LMFAO freezing 72F come to where im at sissy lol 37F in Windsor ont Canada
Hey man i would like to ride in The flatty. Local man
Wish i had more than a dollar to my name to buy a vehicle, but ill never have anything nice. I'd love to buy the white Dodge, but it is worth way more than the dollar in change that i have.
well wishes to your dad be nice to have that truck but rather have an eaton fuller in it
I’ll trade my 6 speed 3rd gen for your white one
Do assem... video!!
Lol 71 degree cold starts. It’s like 30 degrees at my house right now.
26 at my house still have not used block heater yet
Matt Logel it’s a decompressed race motor.... 71 is a cold start, you would never start that in really cold temps.
It hit 0 here😅
What’s up with the ladder on that tree tho
How much money now
Flatly needs a nice set of wheels and tires
Those coopers are nice tires
Damn man you make that look easy. Great job with the videos and all the content you put together I know it takes a lot of time and I want to say thx cause enjoy watching. Anyways I'm about to attempt my first rebuild on my 2003 cummins with a 48re, not much power maybe around 400 hp daily driver. What is a good rebuild kit to go with ? I'm a broke bitch so I'm looking for the best bang for buck. I know ur busy, but any helpful info would be greatly appreciated. Thx again.
I will give you 12500 for it
You going to ryc
Should start a new channel “after hours vlogs” since you just talk the whole video.
First 👍 the truck sounds badass