Great video, very usefull. I have a Borther DCP-195C that wasn't used for years and now its prints a test page with the three colours. I'm not getting black though, anything else I can try to get this fixed? Many thanks
Loved watching. I have had my MFC-J630 for years black just stopped printing. I got the cleaning kit. And still only getting 4 or 5 dots. Then I went thru maintenance cycle still won’t print black. Soooo I ordered me Brother laser all in One. But have been searching for video on how to do what you did in your video. 😃 I just couldn’t throw this one away. So I cannot pick new one up until Friday so I am gonna attempt to fix this. It has been an awesome machine for years. THANK YOU 🙏🏻
what did you do to remove the printhead? i can't move my print head, i did not see what actually did you do before you slide the print head. please reply to me. i need to fix my printer. Thank you so much!
Thank you for the excellent video. How about upon turning on the dcpt710w printer, after 10seconds it will turn off automatically and never turn on again. Thank you in advance
Dear friend, Thank you so much for your excellent explanation, but I finished every thing I got error in the display ( Unable to Init .50) and there's no any paper jammed, what can I do now. Thanks
Hello brother, what do you do to move the head to the left? You can't see it in the video and I'm stuck at that step, I'm not able to move it.... I hope you answer me, I have the whole machine disassembled and I'm stuck at that point... Thanks!
HI DEAR SHOULD THE HEAD MOVE TO BOTH END SMOOTHLY, BECAUSE AFTER I CLEANED IT NOT GOING TO RIGHT SIDE AND IT SHOWING STUCK SOUND, WHEN I START THE PRINTER SHOWING MASSAGE INIT UNABLE 50 WHAT TO DO HOW I CAN FIX THANK A LOT BRO.
Bhai J 125 full blank page nikalta hai kabhi use nhi hua tha abhi tk first time use ker rhe to blank page aata ink cartridge sath wali hai to kya naya lena padega kaise milegi
Kya short motherboard repair ho skte h mere printer on nhi ho rha aur power supply thik motherboard moisture ki wajah se short ho gya any possibilities
My brother, I have a Brother J125 printer. I cleaned the head, installed it in its place, and cleaned the printer. The print quality was good, but the colors started to disappear after printing more than 5 sheets.
hello brother, I have assembled everything again and it still does not print, it takes out the blank sheets completely, I have noticed that the ink hoses do not fill, do I have to do something special? I would like you to give me a hand thank you…..
@@ShivamSharmaRepairs As I see the hoses are not filled with ink, the cartridges are full so it recognizes them, I have cleaned, aligned etc etc and it still does not print... Is there any special configuration to do? Or some step of the video I left without doing...
I have DCP J-125 brotehr all in one inkjet printer which is really very good, now head blocked and ink absorber pad is full message showing your video is good but i think i can not dot myself any one can help me to do it. or any professional who can do it i will pay for it.
hey bro, I'm using brother dcp-t310 and it says that there's an error, specifically it says that "Paper Jam" even though there's no paper inside. I've already tried cleaning the strip but still it didn't work. Please help me out, thank you bro.
Hello i have same brother it prints 10/10 after cleaning, but after 20 pages it starts to get worst and i need to clean again what could be the problem
Stuck at minute 2:41 that you don't see in the video how you move the head, and I'm left with a white plastic piece in my hand and there is no way to move that head.... Help please
Where head parked on back a gear rotate upside head will unlock if can't access this simple give a printer a print comand when head goes left remove power
Hello brother, what do you do to move the head to the left? You can't see it in the video and I'm stuck at that step, I'm not able to move it.... I hope you answer me, I have the whole machine disassembled and I'm stuck at that point... Thanks!
@@ShivamSharmaRepairs ek help or ker dijiye sir black ka test print proper nahi hei. Space hei kafi koi aisa he solution ho to bata dijiyega sir plese and yes blue color print hone laga hei. Thanks a lot sir
Check back side having gear rotate upside If you sitll can't understand msg me on my Gmail id computersolution3697@gmail.com i will share you a short video how to unlock it
@@ShivamSharmaRepairs thank you, but the head is not getting murekkep. unfortunately, there are no spare parts in Turkey. what can I do ? I took my head off, cleaned it with acetone thinner hot water, I think it wasn't completely cleaned
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
I need to change my ink absorber, this tutorial video showed me how to remove the cover to get to the absorber...Great technician...Thank You
Welcome 🤗🙏
Great video, very usefull. I have a Borther DCP-195C that wasn't used for years and now its prints a test page with the three colours. I'm not getting black though, anything else I can try to get this fixed? Many thanks
Loved watching. I have had my MFC-J630 for years black just stopped printing. I got the cleaning kit. And still only getting 4 or 5 dots. Then I went thru maintenance cycle still won’t print black. Soooo I ordered me Brother laser all in One. But have been searching for video on how to do what you did in your video. 😃 I just couldn’t throw this one away. So I cannot pick new one up until Friday so I am gonna attempt to fix this. It has been an awesome machine for years. THANK YOU 🙏🏻
Welcome 🙏 ☺️
Best of luck 👍👍
If you need any help you can msg me on my Instagram id@shivam2929
Did you fix it?
Amazing helped me to restore and repair my DCP j 125 with 50 error..
GOOD TICHING KARTE HO AP THANKS 👍👌👍👌👍👌👍👌
what did you do to remove the printhead? i can't move my print head, i did not see what actually did you do before you slide the print head. please reply to me. i need to fix my printer. Thank you so much!
If you can't see which gear i rotate other simply You just give a print comand and when printhead goed left remove power so your head will unlocked
Nice job thank you sir
Welcome sir 🙏☺️
Thank you for the excellent video. How about upon turning on the dcpt710w printer, after 10seconds it will turn off automatically and never turn on again. Thank you in advance
Send me demo video on my Instagram id @shivam2929
thank you so much you save my 4000 bucks thanks dear god bless you i subcribed your channel and share also keep doing your great work
What liquid did you use to ultrasonic clean? Thanks for the video
Ipa thinner but you can use Rubbing alcohol also ☺️🙏
@@ShivamSharmaRepairs thinner...??? The thinner that you use in oil paint to diluid?
@@divisamx213 It’s an iso propyl alcohol..it’s not that thinner u use on oil paint.. u can google it
@@ShivamSharmaRepairs isopropanol alcohol?
Dear friend, Thank you so much for your excellent explanation, but I finished every thing I got error in the display ( Unable to Init .50) and there's no any paper jammed, what can I do now.
Thanks
Welcome sir 50 cause pump sensor
Send video on my Instagram id @shivam2929
@@ShivamSharmaRepairs
Thank you Sir .
Hi same problem. Can you help me? Thanks
What is that vessel in which you clean. And what is that liquid
One of the most affordable wireless printers
Heythere, i have a stocked dcp 165c for 4 years. Is there a way to do the cleaning without the ultra sonic machine?
th-cam.com/video/ChtNdLM9MH8/w-d-xo.html check this
hyy syivam.. I like to ask something. how to make the le ink move to the head.. my pipe is empty.. no ink after replace the head.. tq
Deep cleaning using Maintenance mode
Hello sir mera ek brother dcp-j125 ka printer hai to uska head ke upar jo pipe ek lead reheta bo toot gaya hai aapke pass mile ga kya
Yes
Hello brother, what do you do to move the head to the left? You can't see it in the video and I'm stuck at that step, I'm not able to move it.... I hope you answer me, I have the whole machine disassembled and I'm stuck at that point... Thanks!
Ddi you figure it out?
HI DEAR SHOULD THE HEAD MOVE TO BOTH END SMOOTHLY, BECAUSE AFTER I CLEANED IT NOT GOING TO RIGHT SIDE AND IT SHOWING STUCK SOUND, WHEN I START THE PRINTER SHOWING MASSAGE INIT UNABLE 50 WHAT TO DO HOW I CAN FIX THANK A LOT BRO.
Hello sir thanks for watching my video pls send me video on my Gmail computersolution3697@gmail.com or Instagram @shivam2929
Sir mere pass printer head washing machine nhi h to mai kya kewal Ipa thiner se head ko clean kr sakta hu?
Will this procedure work for mfc j5910dw?? What is the liquid you are using and where to get it?
First try this method th-cam.com/video/kMbmlXkCre8/w-d-xo.html
Bhai J 125 full blank page nikalta hai kabhi use nhi hua tha abhi tk first time use ker rhe to blank page aata ink cartridge sath wali hai to kya naya lena padega kaise milegi
I not useing printer for last 5-6 months now only bank paper come out .. what is the problem .. is it repairable?
Thanks so much for the video. I have j125 and can't get passed unable to init AF error - because no number pad for codes, can you help?
th-cam.com/video/lTeYb1mc1mE/w-d-xo.html
Af error
Kya short motherboard repair ho skte h mere printer on nhi ho rha aur power supply thik motherboard moisture ki wajah se short ho gya any possibilities
No sir
Which model you have ?
Thanks i solve my issue
My brother, I have a Brother J125 printer. I cleaned the head, installed it in its place, and cleaned the printer. The print quality was good, but the colors started to disappear after printing more than 5 sheets.
Change inks
Use compatible inks
Good Work
Thank you
hello brother, I have assembled everything again and it still does not print, it takes out the blank sheets completely, I have noticed that the ink hoses do not fill, do I have to do something special? I would like you to give me a hand thank you…..
Are you use Deep cleaning mode after assembled maintaince mode cleaning
@@ShivamSharmaRepairs As I see the hoses are not filled with ink, the cartridges are full so it recognizes them, I have cleaned, aligned etc etc and it still does not print... Is there any special configuration to do? Or some step of the video I left without doing...
@@ShivamSharmaRepairs I didn't do the step where you mark 760 for the ink to flow, could it be because of that?
How much will it cost me to repair my printer
if there are not so good results with this procedure can you tell the print head is dead?
Instagram id @shivam2929 send me images
I have DCP J-125 brotehr all in one inkjet printer which is really very good, now head blocked and ink absorber pad is full message showing your video is good but i think i can not dot myself any one can help me to do it. or any professional who can do it i will pay for it.
Nice video
good boy! but you need protective gloves, a set of serious screwdrivers and to read all the services manual, not just the part of the codes ;)
Ben 10
Pretty darn awesome 👏🏻 👏🏻 👏🏻
Welcome 🙏
Thank You
Welcome
dcp-j105 po magkano palit print head napo?
แบบนี้เราจะทำกานแก้ไขแบบใด ( See Troub I eshooting in User's Gui de ) ส้างครีบทาบอกแด่
Bhaiya ji iska DCP KA LASER REPLACE KARTE HAIN
hey bro, I'm using brother dcp-t310 and it says that there's an error, specifically it says that "Paper Jam" even though there's no paper inside. I've already tried cleaning the strip but still it didn't work. Please help me out, thank you bro.
Tell ne full error
bro i think i resolved the "Paper Jam" error but now it says that the cover is open even though it's closed
@@namjameseu6246 You missed yellow wire to attach in mother board
how about the clogged ink?
can you also tell me where's the sensor of the cover and how can i close the cover even it is open
How to resolve the cover is open or it said close the ink cover in j2200?
Brother @2.40 exactly what you did not visible. I m stuck at this point
I just roate a gear
what is the cleaning solution use?
Ipa
Can you please tell me the code you use for the error?
Its maintenance mode for deep cleaning printhead
Thanks
Welcome 🙏☺️
Greetings to you. Did you receive the two videos?
Hello i have same brother it prints 10/10 after cleaning, but after 20 pages it starts to get worst and i need to clean again what could be the problem
Change ink
Use 100% compatible inks
@@ShivamSharmaRepairs where to find it?
I am from India if i send you link its doesn't work better find original brother inks
I do the same with ultra sonic cleaner all ok but after print 20 page the printer print bad qualiter can be cause the qualiter ink i used
Yes ink problem
Stuck at minute 2:41 that you don't see in the video how you move the head, and I'm left with a white plastic piece in my hand and there is no way to move that head.... Help please
Where head parked on back a gear rotate upside head will unlock if can't access this simple give a printer a print comand when head goes left remove power
ສະບາຍດີ
Hello brother, what do you do to move the head to the left? You can't see it in the video and I'm stuck at that step, I'm not able to move it.... I hope you answer me, I have the whole machine disassembled and I'm stuck at that point... Thanks!
Send msg on my Instagram@shivam2929
I can't any notification TH-cam comments
Plz reply sir any solution
Is it possible to clean this without using the ultra sound?
Which model you have ?
@@ShivamSharmaRepairs MFC-J220 similar to the video. Where I stay its quite remote and access to supplies is limited
Try this th-cam.com/video/ChtNdLM9MH8/w-d-xo.html
Ghar mei head clean kaise hoga sir
sir my brother printer j125 was not printing i open the head clean an fix.Now do not want to go to the right end and no printing.
Hello sir thanks for watching my video please send me video on my Gmail computersolution3697@gmail.com or Instagram id @shivam2929
@@ShivamSharmaRepairs okay sir thank you
is it okay if i let that sink for 2 weeks?
Only 1-2 days will be better
@@ShivamSharmaRepairs will that have any effects if i let that sink for two weeks? its still there btw.
No effect but nozzle will again clogged
Why not just shoot the solution through cartridge seats through to the printhead like many do?
Solution will ruined your cartridge detection sensor
My brother printer dcp J125 not working can you please resolve...
What issue are you facing ??
And where are you from
Hi, how to fix when there's a lines in a photo?
Need head cleaning
ink ki suppy proper hei but cyan is not printing
Printer head washing machine ke jgh kya use kru.
Printer konsa model hai
@@ShivamSharmaRepairs brother t500w
@@ShivamSharmaRepairs colour ka thik print ho rha black me problem h. Only black print krne pr to bhut kam or halka print aa rha h.
Abhi printer khola toh nhi hai ?
@@ShivamSharmaRepairs nhi
Sir 4f error how to solve problem
Print head change
Thanks a lot sir blue color is working but somne black and blue dots are not print
Sir how about init unable 48? Brother j200 printer...
Sir 48 error cause printhead not repsonding or dead
Watch this video and try it in your printer sometimes error gone
@@ShivamSharmaRepairs okay sir i will try it
Good luck ! 😀
Hi sir how about init unable 43 j200 brother printer?
What liquid
Pcb cleaner ipa
Dcp t300 ka head price?
4000
mera printer blue color nahi de rha hei head kasie repaire karu sir.... j100 hei
Ink ap tank use kare ho ya original cartridge ? Refill karvayi ho toh konsi ink dali hai mai apko link bhj raha hu vo vali cleaning karke dekhiye
th-cam.com/video/Yhawnq82FxM/w-d-xo.html
@@ShivamSharmaRepairs ek help or ker dijiye sir black ka test print proper nahi hei. Space hei kafi koi aisa he solution ho to bata dijiyega sir plese and yes blue color print hone laga hei. Thanks a lot sir
Sir black ink konsi company ki use kare ho bottle ka naam
@@ShivamSharmaRepairs gocolor compeltible
Sir how can i fix if the only ink working is Black. I can print colored. 😔
Which model ?? Or which ink you are using original or other brands
@@ShivamSharmaRepairs Brother Mfc J220. I am just using other brand dye ink.
@@ghayereyes8029 change inks and clean printhead also
@@ShivamSharmaRepairs ok i will try that. I am using ciss. Do you think if i reset purge would it help?
th-cam.com/video/Yhawnq82FxM/w-d-xo.html
2:39 how did you removed it? I cant remove it haha
Check back side having gear rotate upside
If you sitll can't understand msg me on my Gmail id computersolution3697@gmail.com i will share you a short video how to unlock it
How to solve 4f unable to clean
Head change
How to repair brother j220 cant flow the ink
Use maintenance cleaning mode
@@ShivamSharmaRepairs i already clean the head but the ink can't up until in the head. like in the 12:20
@@ShivamSharmaRepairs can you put here what code i gonna use because i can't see the message in the printer lcd. the 760 is that correct?
Sir my printer ink no runing in pipe what m do
Apply maintenance cleaning mode
@@ShivamSharmaRepairs sir how clean it
Sir which model you have
Msg me on my Instagram id shivam2929
My brother printer not print black print.
DCP J140W
What is your mobile no.
My head is moving abnormally when it reaches to half side it strikes very fast(moves very fast and collide).
Check encorder strip
@@ShivamSharmaRepairs will I have to replace it
No sir
Clean and align the strip
Send me video on my Gmail computersolution3697@gmail.com
I want brother dcp-j125 print head
Head lock in right side
4f error apka error hai toh head change hoga
@@ShivamSharmaRepairs thanks u je
🙏☺️
head ink na khiche to kya kre
Sir maintenance vali cleaning karo
th-cam.com/video/Yhawnq82FxM/w-d-xo.html
Issmai de rakha hai mene
How to contact u?
Instagram id @shivam2929
@@ShivamSharmaRepairs thx for reply.. but sir m not using Instagram any other way to contact u
@@nareshdholiya3222 what's app 8802336642
@@ShivamSharmaRepairs HX VERY MUCH
We cant see how to fix the error
Which error ?
SIR I HAVE BROTHER DCP J125 WILL YOU REPAIR IT HEAD PLEASE SEND YOUR CONTECT NO
My location is delhi
मेरे प्रिंटर में प्रॉपर कलर प्रिंटिंग नहीं आ रही है j125 है उसे ठीक करवाना है क्या कर दोगे W app.704893114
Ap kaha se bat karein hai sir
Sir 805 ka kharab head mil jayega apke pass muje sir head ki. Patti jo steel ki lagi hoti h wo chahiye 7017487530 me uski payment de dunga
Error 48 😠😠
Check pcb connection if not work
Changed printhead
@@ShivamSharmaRepairs thank you, but the head is not getting murekkep. unfortunately, there are no spare parts in Turkey. what can I do ? I took my head off, cleaned it with acetone thinner hot water, I think it wasn't completely cleaned
@@turkaysoyer5405 tell me before condition head showing error 48 or not ??
@@ShivamSharmaRepairs at the moment, there are no mistakes, but murekkep does not go to the head
@@ShivamSharmaRepairs can you give me your phone number and I'll send you a video of the printer ?