Pre Program Settings Damao Mao1 Display | P - Settings | Blade 10 | James Angelo TV | Vlog.80
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Take Note : P03 = 60 Volts| P06 = 10 inch | PO7 = 30 magnet | P15 = 49
Pre program settings ( P-SETTINGS )
P-settings allow scooter riders to customize their ride.
HOW TO ENTER:
1. Power on scooter.
2. Press and hold Power + Mode buttons.
3. Press Power button to toggle through P-settings.
4. Press Mode button to adjust values.
PO1 : lcd brightness level (1,2,3 )
P02 : Mileage display in km or mile.
P03 : Voltage level of machine ( 48,52,60, volts )
P04 : 1-60 mins before machine goes to sleep in activity DORMANCY TIME
P05 : RESERVED
P06 : Wheel diameter in inches
P07 : No. of magnets on motor 30 is default
P08 : Power level (0-100)
P09 : Zero start or Kick start ( kickstart for beginners )
P10 : RESERVED
P11 : RESERVED
P12 : Soft or high acceleration ( 1 is softest 5 is highest torque )
P13 : RESERVED
P14 : Controller Current Settings 1-20
P15 : Controller cut off voltage
P16 : RESERVED
P17 : Cruise mode ( do not use cruise control if your beginners )
P18 : EABS Switch choose
#damaomao1#blade10#eonmotors
PLEASE LIKE,SHARE ,SUBSCRIBE TO MY YOU TUBE CHANNEL!!
➡ Facebook / jamesangelo.caunca.5
➡ TH-cam www.youtube.co...
OTHER RELATED VIDEOS
BLADE 10 2021 TOP SPEED & RANGE TEST : • Blade 10 d pro 2022 Ho...
BLADE 10 2021 SINGLE MOTOR TO DUAL : • How to Easy Convert Si...
BLADE 10 2021 TIPS FOR BEGINNERS : • NEW Blade 10 Installat...
Thanks James this is very helpful information.
thank u also for watching bro🙏 drive safe🤙
Merci beaucoup, tu m'a sauvé 👍👏👏👏👏👏
Thierry LYON FRANCE
thanks bro appreciated🤝
Thank you so much for this you were very informative 👍 only one thing aside the p settings my scooter came with a speedometer anyway of changing it from kmh to mph? Or recommend a speedometer thanks in advance 👍
for blade e scooter some display cant br change to kmph to mph its fixed already
Ordered this scooter yesterday I have the kqi3 pro so this will be my first scooter over 20 mph .
that’s great bro congrats
@@JamesAngeloTV thank you.
❤
Salamat paps sa info ngyn mpplitn kna setting ko..godbless😊
ako dapat mag pasalamat senyo paps. salamat sa suporta☺️🙏🙏
This video helped a lot of questions than you
thanks bro appreciated
Good job lods👏👏
Thank you very much.
me pleasure bro
very helpful!
thank u bro🙏
Спасибо, вот расшифровка для Русскоязычных пользователей:
P1 яркость дисплея
P2 0 - км/ч 1 - мили
P3 вольтаж
P4 время до отключения в минутах
P5 зарезервированный
P6 диаметр колес
P7 колличество магнитов
P8 ограничение максимальной скорости
P9 0 старт с места, 1 старт только после отталкивания
P10 не менять
P11 не менять
P12 стартовая мощность
P13 не менять
P14 настройка тока контроллера от 1 до 20
P15 минимальный ток отключения (49-50 при 60v)
P16 не менять
P17 круиз контроль (0 - отключен, 1 - включен)
P18 ABS (0 - откл. 2 - по умолчанию, 3 - самый сильный)
english bro please
@@JamesAngeloTV I translated this for the Russians)
@@yb8425 wow thanks bro 🙏
Серьёзно можно менять ток контроллера? Такое редко встретишь! Вы пробовали менять, можно понизить ток?
@@Ahmad-jx2cq да, попробуйте изменить параметр P14 с 20 до 5 например, почувствуете разницу)
Hi James i jave 1 problem. I cant use My power butten on My es1 so i cant turn it off or use the lights and so on and I hoæed you knew how to fix it i have All the update on everything
Hi bro.. Is the parameter setting for Blade X Pro same as Blade 10? When I bought the Blade X, the seller explained a few settings but slightly different compared to your video..
that is same only bro bladex and blade 10 has same controller and display
may i know what is the P numbers has a difference
My seller explained to me that P10 is for soft/hard start strength.
Got issue with my throttle..during ride sometime the throttle will not respond after I let go the throttle when braking. Need to play the throttle a few times before start responding again. My seller still no response about this issue.
@@kawehannuar4945 did you check how close your display is to the brake lever? Maybe the magnets are too close. Try to get some distance between display and brake lever. Try again and see if this helps ;)
I also have damao mao1 but my throttle is broken .. can I set up another brand with the same power I have 48v 3200 watts?
nope bro, all throttle have different program,
Thanks but where i can find this damao mao 1 i look in internet i can not find it ..i need only one !?
check your supplier or check in ali express make sure same scooter display
Hello, I bought a diaplay damao, which works between 48v to 60v but when I connect my 48v battery it appears almost discharged as if the display detects that it is 60v and not 48v, how do I configure it so that it detects that it is 48v and not 60v
only option is to go settings and change it to 48volts
Hello,
I have a Fieabor Q06 PLUS Scooter.
There seems to not be much info of this scooter... I was adjusting the P settings and am not sure if they are right. Can you PLEASE tell me what the proper P settings should be for this scooter ??? the Fieabor Q06 Plus.
I am an aggressive rider ,but want to get the best mileage as possible.
Thank you so much. Phil T
may i know the brand of display bro
@@JamesAngeloTV hey, there is no name on the display.... It just has a display. power button and a settings button... Two buttons on it...
Hello my friend the blade gt with this screen is stronger than the minimotors? Or is the same Angelo?
minimotors display is better bro
@@JamesAngeloTV can you use minimotors displays on first blade gt that bring that screen?
Hello. I live in Europe where the speed is limited to 25/kmh. My scooter has no limiter so i tried to lower the power at P8 but under 50 the motors are cutting off. I am a heavy person so in first speed, eco and single motor the max speed on flat terrain is 27. Problem is the police are testing the scooters on some device with roles so no weight, no wind resistance... They want electronic limiter which on chinesse scooters is a big no. Any idea how to lower the speed? The scooter is locked on first speed and if I use turbo and dual fer me would be enough. The scooter is a Yume M11, 72v, 7000w. Thanks.
check if there speed limiter in controller for blade scoot there is speed limiter
@@JamesAngeloTV I thank you for the really fast answer. Do you mean to check inside the motor controllers? If that maybe I can find somebody with electronics knowledge but with no schematics of the controller who knows for what to look. I looked opened the scooter to add front signal lights and there are a few unused connectors which are coming from inside the controller but who knows with china products what's what :)). They are the ones sold together with the Damao Mao1 display.
i mean in controller connection for blade there 2 wires if you connect that it will serve as speed limiter
Salutare,sper ca nu ma înșel ca ești roman de al meu(după nume) ,ai reușit sa limitezi trotineta?Am și eu un Yume M11 PRO,si vreau și eu acea limitare dacă e
@@DanyCjRo :)) Nu te inseli Dani. N am reusit sa o limitez. Singurul mod in care o poti limita, adica sa o blochezi in modul eco single motor e sa i treci firele de la cele 2 butoane printr un alt buton eventual ascuns. Daca e tinut apasat respectivul buton sa nu poata nimeni sa schimbe setarea minima in care va merge doar cu 25. As fi dorit sa i adaug ceva care sa o limiteze cand citeste kilometrajul ei 25 pt ca in tara unde umblu eu cu ea politia o testeaza pe loc adica in gol nu in mers. N am gasit nici o varianta. E vorba de controlere care nu cred ca sunt prevazute cu asa ceva. Am in plan sa le schimb cu unele sinewave dar sunt ceva bani si tot nu reusesc sa ma rup de alte cheltuieli 🤷🏻🤣. Daca cumva gasesti vreo alta solutie te rog sa mi scrii. Bafta si sanatate multa.
is there eco mode on single motor? blade10
walang connection bro for eco mode kapag single motor / sa dual motor lang meron
Hi,
it is probably bit late for question.
But I wanted to know if there is a way to change power level back to 100 after changing it to different number.
After I changed it it allows me to only switch from 0-99. But when I try to go up with 99 on screen it goes back to 0.
Thank you for the reply.
some display is like that up to 99 only. in actual ride with rider you will not reach more than 100kmph
@@JamesAngeloTV The weird thing is that it was originally 100 before I changed it. But could not get it back to 100 basically.
Also my motor magnet i cant figure what it is i think 30 but its a LY60V11 3000 WATT GOLD MOTOR
that is 30 magnet bro
@JamesAngeloTV also why would my speeds go all the way up to 9 it should be 3???
@JamesAngeloTV thank you James 🤗
Could my controller be bad
Is there an option for regenerative braking? I am looking forward to buying a Blade GT but woul like electric braking to extend life of brakepads and charge battery
yes there is electric braking bro. once you press motor it will tunr off then once you use in downhill with out pressing the trigger it regenerates the power
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊⁰
Hi there i need help with my damao mao 1 i messed with setting and now my throttle wont work. When i push mode it reads speeds all the way up to 9 what do i do? Is there a factory setting?
Hi would you know the setting for the new Damao ma01 I’m having an issue with it cutting out when an the reserved settings on this one seems to change things on mine for example p setting 5 if I put in 002 it won’t move if I put in it 001 it will go about 50kph and 000 goes 88 kph
if it is reserve dont change bro
Is there a reset for the throttle? If so can someone help
no bro there are reset on this
@@JamesAngeloTV so i have to buy a new controller and throttle??
@JamesAngeloTV i just threw it all away what a waste of 150 dollars
Is this the same P settings for the Fieabor Q06? thanks a bunch, i just bought this off someone
if damao display yes it will be same
i have blade x pro but my setings on P10 and P11 its diferent than yours, recomend change like you screen? o dont move that, P10 its 2 and P11 its 11, sorry my bad english :D
i didn’t change that bro because that is default settings from factory
@@JamesAngeloTV thanks!!!
Bonjour james pour ma blade gt 10 je voudrai qu'elle démarre plus doucement elle et trop brutal comment faire dans les paramètres merci mon ami 😉🤝
bro please english thank you🙏
@@JamesAngeloTVlol😅
All these displays (qss4, damao, minimotors) works with the same controllers?? Or minimotors has other controllers?
yes minimotors has a different controller not suitable in damao display
U know James i saw some videos they say on p08 that u put 99 and that is like u remove speed limit is p99 good or bad ?
that is no issue bro
Hi James Angelo
Can you tell me where can i see if the blade 10d evo have the damao lcd?
I want to order one....
Only see pics with qss4
mention in seller damao dispalay the latest version of blade 10 there another evo blade 10 evo pro which is thumb throttle w/ big lcd
@@JamesAngeloTV
Thank you
I wanna order one because of your videos, wasn't sure which blade to look for
just tell to seller blade 10 evo 2021 thats for sure
where is your location bro?
@@JamesAngeloTV
Austria EU
Hey James where can I get a new 60 volt battery for my blade 10D pro a good one?
where is your location bro
Hey James my scooter is only saying 63.4 volt after been charged do you think I may need new 60 volts battery? If so send me a link to get one please
you can get in ali express bro
Hello James i lfind one but it is 60v this company say to me is no problem i say i has a 48v the men say it will works ..i ask it to you...is it works i has 48v but the company tell we get a 60v same Brent Thanks in advance
in settings there is option to change the voltage level, if same brand ang supplier yes it will fit
Hey James, so i have xtron 72 volt, i need the do not touch settings , also i have 11 inch tire and its set at 10 should i change this
thanks
yes change the tire size.
Hello. Can i change the electric brake to on/off?
yes you can but i suggest turn it off other wise not smooth rides when turn on that is P18
It didn't work anyway! P18 (0,1,2 or 3)
option is 1 and 2 only
Help me with the setting of x6 pro
if same display same settings only only tire difference and motor magnet
Hi, i have a question
in some e-bikes or scooters order to change p settings you need to enter a password first
where is this password is stored ? in the display throttle or inside the controller
i mean if i have my p-settings locked and i will replace the display (qs-s4) will it help or the password stored inside the controller
TIA
as i experienced bro mostly in europe country they make the password in the display. the password is inside of display not in controller. if you will replace the display you need to replace the controller because each display have different programs
Boss paanu mag set up ng seeting sa jacks star. Tornado t3 po scooter ko. Salamat po.
yes bro. hindi pako ganun nagkakaron ng same na scoot. sa mga basic infor same lang halos ng damao yun. or mas ok check mo se manual ng scoot mo
Brother, do you know how can I reset it to the factory settings ?
there are no option for reset bro.
@@JamesAngeloTV
Bro, I messed with the reserved setting, and my scooter doesn't work could you help me?
@MustafaJabbar1 what happen to your scooter?
@@JamesAngeloTV I have a dual motor 1200w*2, and the rear motor doesn't move. when I press the throttle the motor gets so hard to move
hi friend amazing videos !! pls help me i just got home mine 2400w dual 1200x2 48v 21ah scooter, and i have damao screen aswell pls can u tell me what is best settings for top speed fastest ! ? and ofcurse so i dont dammage scooter thank u
p3 48
p6 wheel diameter
p8 100
p14 controller current setting
Thank u so mutch, so i keep all as a original ? This p14 current settinga what is that ?
Lodi salamat po sa pagpapaliwanag... ask ko lng po n dpat sa P7 dapat 30 magnet din ilagay ko khit QS-S4 ang gamit ko.. salamat po
pwede nyu i observed kung saan malakas ang hatak.
Hnd b magkakagaya... blade 10d ung sakin.... salamat ulit
ang standard po tlga is 30 magnet sa motor
Lodi ok po... try ko po... 💯💯💯
ok po paps salamat po🙏
the p15 comes at 46.0 from the factory how can it be adjusted to lower it
sometimes supplier they do default settings which cant be change. 46 is good. the battery drain voltage is 43volts so your battery still safe even you reach 46Volts
Up from number gear (1-2-3) light an (M)
What is that problem??
I think from something with motors...
Isn't running well...
But what is the problem...???
can you send me video bro
@@JamesAngeloTV were to send a video?
I have and photo if you want James...!
@@antonypartali in my fb bro there is link in description box
@@JamesAngeloTV i sent message, photo and video to MESSAGER...!!
Please take a look..!!
Bjr le compteur damad ma01 et compatible dualtron mini
no bro they are different program. and beside dual tron controller and motor is square wave not compatible in sinwave
Does anyone know how to change the time on this? I couldn't find anything on this anywhere
what do you mean time bro
Hello can i change whit p14 setting my current limit to 25a?
My controller has 30a its to much for my motor😅
what is your scooter bro? if blade 10 minimum is 30a, my suggestion adjust in gear level
@@JamesAngeloTV i have a 48v 500w scooter like kugoo m4 but other brand😅
@@JamesAngeloTV my orginal controller has 20a
How to restart damp ma01
there are no option for reset the display bro
So I live in the United States and I can’t change it to miles per hour
some lcd are fixed in kmph othere wise wait for thier uograde new display
KUYA SAME LANG PO B YAN NG SYSTEM NG JACKSTAR SCOOTER PERO DAMAO UNG CONTROLLER KO AND COLORED PLEASE REPLY PO PARA MAGAWA KO UNG SETTING N GINAWA NYO S VIDEO
same lng bro
Does anyone know the p settings for blade x pro damao display. I need to know where electric braking and Abs are located. I've tried 18 and 11 goes up to 24.
electronic braking (PA) do not exceed 3 personally I disabled it brakes hard at high speed and dangerous for controllers. ABS (Pd), O deactivated/1 activated but I advise against ABS the wheels make lock and make a funny noise
@@trolldescavernes2696 my p settings are different.
Sir James yung blade x ba saka yung blade gt pareho lng ba ng settings?! Salamat po
opo kamangyan maliba sa tire size
Kopya sir James maraming salamat sa oras mo pag reply sken wala kasi akung maasahan dto sa kuwait about sa mga ganito kaya palagi akung nka subabay sa vlog mo malaking tulong talaga sobra God bless you❤️
@@mangyantravel2889 maraming salamat po kamangyan btw mangyan din ako😂
Some reason I'm unable to change it to mph anyone know how to do it? I tried p02 but it won't change numbers
some display are fixed based on country
@@JamesAngeloTV is it coded like that or a switch on the inside?
kuya james pede po ba ilipat ko mother board ng damao sa isa ko pang damao? mag remain po kaya ung settings
anu po ba yung scoot mu paps?
Sir pwede ba lagyan ng alarm ang blade 10d pro?
pwede po basta magaling mechanic
kuya ano po default setting ng p5? nagalaw ko po kasi tapos nakalimutan ko kung ano yung default salamat po
ilagay mu sa middle number 2
Are you in al ain
nope bro im in abu dhabi
@@JamesAngeloTV can i ask you a suggestion i have scene xtrack thunder 4000w dual motor on amazon. Should i buy that. Is it a great scooter
for me much better you buy 60 volts scoot and up for riding satisfaction
@@JamesAngeloTV ok 😘
@@JamesAngeloTV E-Scooter Xtrack Thunder 4000W Dual Motor 58V 95km Range Remote 2021 (Upgraded pls check on amazon and tell me ur tought, because u know better than me
sir james my video kadin ba pano e fix pag nakalog ang manobela
paps wala pa eh, meron 3 reason bakit may wobble una yung malaking turnilyo sa ilalim baka maluwag, 2nd yung dun sa may folding bka hindi maayos pag kaka kabit 3rd kapag pinold mu scoot meron ka makikita sa loob nun 2 or 4 na turnilyo baka maluwag or loose thread na
@@JamesAngeloTV ahh ok salamat sir try ko pahigpitan konti alog plang nmn pero mas ok na ung sure hehe for safety
Lod kapag maingay po motor sira n po b iyon?
possible sira na bearing sa loob
Thank you
@@jesselrivera767 wc bro
Thanks James..what’s the best P settings for speed up to 55mph. X7 scooter and no instructions!
bro apologize but i dont have an idea about settings of x7 scooter
Sir curious ako sa p14 ano po ung settings na un sir?
controller current settings bro. as per supplier use 20. as default settings
HELLO man,can you help me with P SETTINGS for YUME M11 PRO, 2x3500W,60V 50Ah?PLEASE,I have the same display DAMAO MA01. THANK YOU GUY'S.
if damao bro that is same settings
Even is not the same Engine hubs? And the number of the magnets are not different for each model?I mean this have 2x 3500Watt.
Echipa electric scooter have different settings,I mean the most important,magnets number ,voltage.
magnet is same 30 magnets even voltage put 60v
@@JamesAngeloTV Okay ,thank you bro .
Paps un akin namamatay lagi tuwing 3 bars n ln yun battery tas need ln icharge para mag open aya di ko nattapos yun battery ko paano palitan settings nun
palit ka display yung cut off mu maxado mataas dapat 48 volts
Kuya ano standard ng e20 damao p settings standard mabilis malowbat scooter ko kahit kakacharge lng
Ayaw mapalitan paps nkafix ln sya ng 40.0 volts di sya naiiba kahit pindutin ko
Lods kano na ngayon blade 10?
mura lang yan paps😁 pm mu ako paps sa messenger
hello james I would like my blade 10 gt to be less brutal (too much power the wheel takes off I would like it to be softer thank you my friend coco dan blade gt groups 👍👍
hello james I would like my blade 10 gt to be less brutal (too much power the wheel takes off I would like it to be softer thank you my friend coco dan blade gt groups 👍👍
what is your display bro damao or the latest minimotors