Nice video. Easy to follow. One problem; that is the removal of the connectors. Of the 3 connectors from the fuser, the smaller one was a problem. The whole thing (housing and plug) came out together, leaving 3 pins protruding. Then separating the housing from the plug was very difficult. In placing the housing back in place the outboard pin broke off. So, I suppose I'll have to trash the printer. Maybe I'll make one last ditch effort by removing the motherboard & try to solder the pin in place - likely won't work. Haven't been able to remove the small connector at 9 O'clock, which is necessary to remove the motherboard. Any ideas?
Brilliant! (Also the part 2 video) Thank you so much!
Thank you my friend! Perfect!
Nice video. Easy to follow. One problem; that is the removal of the connectors. Of the 3 connectors from the fuser, the smaller one was a problem. The whole thing (housing and plug) came out together, leaving 3 pins protruding. Then separating the housing from the plug was very difficult. In placing the housing back in place the outboard pin broke off. So, I suppose I'll have to trash the printer. Maybe I'll make one last ditch effort by removing the motherboard & try to solder the pin in place - likely won't work. Haven't been able to remove the small connector at 9 O'clock, which is necessary to remove the motherboard. Any ideas?
Thanks for these videos
Do we have to remove the back in order to be able to remove the right side ???