วีดีโอ

Thanks for the great video.

Worked great!

Ever change a 2430 fuser assembly drive side plate noise is coming from insidr

Thank you my friend! Perfect!

Nice video. Easy to follow. One problem; that is the removal of the connectors. Of the 3 connectors from the fuser, the smaller one was a problem. The whole thing (housing and plug) came out together, leaving 3 pins protruding. Then separating the housing from the plug was very difficult. In placing the housing back in place the outboard pin broke off. So, I suppose I'll have to trash the printer. Maybe I'll make one last ditch effort by removing the motherboard & try to solder the pin in place - likely won't work. Haven't been able to remove the small connector at 9 O'clock, which is necessary to remove the motherboard. Any ideas?

Your tips worked for my machine. Thanks!

Thank you for the instructional video -- greatly appreciated!

Ajudou muito

Unfortunately, cleaning all 5 mirrors didn't fix the "Scanner error -Switch Off". Any ideas?

this video saved me lots of $$$

I just got a "Scanner error - Switch off, switch on" message but still your howto fixed it! Thanks so much for sharing your wisdom and showing all the screw locations!

Or, where are you located so I may Google and call/order.

How do I contact you?

Malikote hp300

Thanks. My 1300 is printing light... might the fuser be the issue?

That was great, thank you for posting. My HP 1200 has just developed the black band problem down the left side so I bought a new toner but that didn't solve the problem. I have also found some of the pieces of "paper" like material you spoke of. I have had this printer since 2001, it has printed almost 139,000 sheets so I think it's probably uneconomical to repair. The cheapest fuser unit I can find is on Ebay for £65 so I will probably put that to a new printer, I couldn't tackle the job myself anyway. Thanks again!

Brilliant! (Also the part 2 video) Thank you so much!

Yay! Thank you - now my printer works again! (But what do I do with the five screws I have left over?)

My mirrors where pretty clean, nevertheless I tried to clean them what didnt work... When I turned on with open cover I was wondering what makes the lamp stop when it moves during warmup... At downside of the cover, right from the glass there is a black/white/black area where the lamp is parking. But the white part was not anymore very white, so I put a white paper there (with tixo :) and the next try was successfull, no more error 6 !!! My scanner is working fine again. yippieh

Great video. Could you help me with Torsion springs assembly RA0-1090-000CN which provides upward tension for the green release lever. They both fall of :(

worked!

Are you here? What is the name of the lubricant?

Thanks for the tip, it did the job. Only center mirror needed cleaning, others were good. Cheers

can you inform, what is the name or brand of the lubricant?, can we use plain grease for subtitute?

Do we have to remove the back in order to be able to remove the right side ???

thanks, works perfectly!

didnt work :(

Thanks for the video! It's what I needed so I could get the new fuser roller back in place. I have a second fuser with a bad rubber roller. How do you remove those stiff springs?

Thanks for the great tips and video! Yes, there are still some of us keeping these old HP printers alive!!

Thanks for these videos

Thanks for these videos. This model of printer is a power house but unfortunately the fusers go after heavy use. My printer is putting black lines horizontally across the page, do you think replacing the fuser will fix that? Toner has already been swapped.