Many thanks for this very well made video. As a former mechanic, I can only approve the high quality of the job you carried out. I also love this car, it’s well made and is very pleasant to drive. I will purchase that special funnel as the coolant of my car hasn’t been replaced since years. The service quality you provide to your car is a great assurance that it shouldn’t make any problem. Again thank you for the precious hints you give to me.
I live in Spain. My Peugeot 508 GT 2.0 e-HDI 180CV uses Total Ineo First 0w30 and I always use the original Peugeot anticoolant that has blue colour. Thank you for the video.
Hi, same thing as other comments, I live in France, and the recommended oil in my Owners Manual is Total Ineo First 0w30 with the norm peugeot - B71 2312
Hope it helps when the weather improves a bit. The 508 hmmm, i fell out with this one GT spec wheels and suspension were far too firm to be practical, it handled extremely well but on rural roads where it was used the majority of the time it was unpleasant. Lower spec models with smaller wheels i think were better. Ended up selling this and buying a berlingo multispace
@@mugogwata8638 What parts? Service parts i just bought from the local motor factors. If it was headlights for this GT model well that’s partially why i sold this car as i never wanted to have to fork out 4 figures for a headlight
Thanks for the comment, they really have improved the quality of their cars in the past few years. the 10 or so years after the 406 the cars were fairly sound mechanically but the exterior styling was a bit ugly, their current range is stunning which is great to see.
2016 peugeot hired new ppl from germany same as bmw to help them improve the quality of the cars. Anyway is it same to use breakcleaner inside the fuelfilter housing?
Thanks for the comment, how do you find the C5 aircross. Does it have the progressive bump stops in the suspension, always been interested to try one to compare against an old hydropneumatic citroen.
Wow! Well done! I'd like that you are so accurate. I have got 2 questions. Do you use flush fluids like Liqui Moly 2662? Could you tell me what cleaner do you use to clean parts?
Hi there, thanks for the comment. Generally on the likes of this 'modern' diesel with all its emissions gubbins i read the service handbook carefully and stick to the exact oil it recommends. I do recall that it advised against the use of flushing fluids. Now i have an old Avantime V6 in the shed at the moment that lay up for 7 years, got it started but it ran with a top end tick. There was nothing to loose by running a flush through it and sure enough after 20 mins of the flush the engine sounded nice and smooth. Although thats an old petrol and worth considerably less where a spare engine from a laguna was available to swap in if it was beyond repair. Unfortunately flushes are a bit of a gamble in that regard. As for cleaning parts, the spray bottle stuff. I just use ordinary brake parts cleaner that comes in a 5l can, i think it is holts.
Hello friend... I am writing to you from Argentina, here comes the entire range of PSA (Peugeot, Citroen and DS) with diesel engines. I have a 408 1.6 hdi 115cv (with no active DPF, it means that it is a filter equal to the DPF but it does not have an AdBlue (urea) injector in the DPF nor a diesel injector in the DPF (just like the chevrolet cruze 2.0 comes VCDi 163cv (I also had this vehicle first)) and for me Motor (DV6 9HCG) can take 0w 30 inneo first (always total for PSA engines), up to a certain mileage, and then I can use Quartz 9000 5w-40 or failing that, always use 5w-40. The important thing I want to leave you from the msg is that your engine must use ACEA C1 certified oil, it is low-SAPS with that oil you will have much fewer problems with the DPF clogging. video you have put 5w-30 ACEA C2 Mid-Saps, that oil is for the 1.6 THP gasoline engine, and precisely that engine has Mid-SAPS because gasoline does not generate sulfate particles/ashes, so there is a compensation for "medium sulfates " on the oil side and practically "zero sulfates" on the naphtha; diesel does generate a lot of sulfate particles/ash (a good diesel fuel can have a minimum of 50pp of sulfur (which is later transformed into ash), with that amount engineers are required to design an oil that has at least or more than 250pp of sulfur (Mo / molybdenum (as opposed to Mo, always keep in mind that Mo2 Molybdenum disulfide is not good for these new diesel engines)
Hi there Thanks for the info. Modern diesels are a proper headache when it comes to oil grades. I thought at the time this was the correct oil but interesting to read its not 100% either
DPF clogging is not the worst that could happen to a vehicle. Poor lubrication would reverse any gains of protecting the DPF and even cause long term engine damage. I personally would go with C2/C3 oil with high HTHS.
Hi there, unfortunately i do not have access to a 508 1.6. At some time i may do a gearbox oil change on my berlingo 1.6 HDi which will be similar but it will not be happening soon.
I suppose it makes it pour out the oil quicker but i never remove it on any cars come to think about it, as i usually go about checking other aspects like the suspension buses or brakes while it drains. It still all drains out, to be honest i cant imagine it slows it down a great amount as the crankcase breather means its not a sealed area preventing the oil from pouring out.
no, hdi engines have special additives for dpf filters, look in front of rear right wheel you wil see a small box, inside is a plastick bag with black liquid that is additive that is sprajed into dpf filter to burn it off, hdi engines are one off the best diesel engines today, my Citroën c5 2009 got 578.000 km and still going strong, driven acros all off Australia
The eolys fluid, is that all they use to burn off the soot? This is my first car with a DPF although i know some of the non PSA systems ran the car rich to burn off the soot. The HDi engines are great seem to be very reliable as modern diesels go.
Yes, ALL peugeot's use EOLYS fluid so there is ZERO engine oil dilution issues like you get in pretty much every other diesel car. Friends use to moan but I would rather pay £120 per 100k miles than pay for an engine rebuild.....
Great video mate i live in aus and just got the same car 2016 508 allure 2.0 diesel first diesel car the dealer seemed abit dodgy are you able to make a video for somone who doesn't know what there looking at a step by step guide on the best way to maintain and service this car. Cheers!
thanks for sharing the video , please could have your thoughts on how it drives and what you think of the car overall , i was thinking about getting one early part of this year but ended up getting a Hyundai I40 estate not a bad car but not really exciting to drive and had a few things replaced under warranty. thank you for your time to reply
On the 2.0 hdi do the dipstick not show correctly. I bought my car and noticed the dipstick was broken and bought a new one. Aster servicing it now says oil invalid on the display, I've read online and ppl say to cut the dipstick tube, is that right?
Hi there, Not aware of it being an issue on this engine. However on the old old 8v HDi fitted to the 406 and xsara the dipstick could break off and the sump had to be removed to retrieve the stick part of it.
After servicing "oil invalid measurement" means you have too much oil in the engine. Also the FAP is not working at all. Check the level oil with a genuine dipstick, assure correct level (UNDER the Maximum level on the dipstick) and reset again the service interval. I did it so and now every think is o.k.
Don't supposed you remember how much antifreeze the cooling system took? We've just had ours done and supplied the garage with 12L of ready-mixed and the car was returned with 8L unused after they flushed the system with tap water. They said it would only take 4L!
I can’t remember the exact mix, thought the video had it in the subtitles Definitely was under 5 litres as thats the size of bottle i buy from the motor factors
@@peugeotCitroen2CV Thanks for the reply. I saw the 5L container in the video but I couldn't see if it was premixed or concentrated? Ours looked the same dirty colour as yours and whilst it has never moved from the MAX line in 12 months, it had a slightly oily texture to it, although I couldn't see any oil and the expansion bottle was clean plus no Mayo on the dipstick or filler plug. Don't suppose you remember if yours had a similar texture, which I'm hoping is just down to age (suspect 7 Yr old original antifreeze) rather than a leaking oil or transmission cooler? I agree on the firm ride as we were looking for a GT but settled on the Allure after driving the former as it's basically the same spec minus leather and drivers seat memory but you gain the smaller 18" wheels, which ride much better, although the GT does have the fancier front suspension setup. Brilliant video! 👍
@@dontcare32123 The bottle i used was concentrated, there was a certain dilution with water when it went into the car. I cant remember if there was an oily texture although you can get some bizzare patterns on old anti freeze, flush it all out and refill with new antifreeze. Keep an eye on the condition of the new stuff. With regards the allure, was it the GT or the 2.0 engines that got the double wishbones up front? I know the 1.6 has standard mcpherson struts but thought the 2.0 engines were upgraded.
I don't understand how the handbook can have a mistake this big. 2.0 Bluehdi engines run on 0w30 oil, specifically Total Ineo First 0w30 not Total Quart Ineo ECS 5w30 wich was the oil used for the old Euro5 engines. The oil required must have the PSA B71 2312 approval, wich only 0w30 oils have. The engine will be very happy with the oil you used, but the DPF won't.
Im glad i took a picture of the handbook and included it in the video for this exact reason. This particular car was not a blue HDi version if that makes any difference, they came a bit later in the 508 range.
@@ionescugeorge2003 It was the 180bhp engine but not a blue HDi, that seemed to come in about 2016, this was a 2015 car. I remember at the time asking on the owners club if it was a blue hdi but apparently not. Sold now though, the ride quality was terrible
Hi there thanks for the comment The spray is just standard brake & clutch cleaner i buy it in a 5l drum and fill the sprayer with it, i think its holts branded stuff
Hi there I never seen the point in the hybrid 4 system on the 508. Unnecessarily complicated and i think most reviews pointed out it did not really show any significant real world improvement. Especially without a plugin version that would mean say a range of 30 miles without the engine. The 2.0 is powerful and reasonably economical. A word of warning test drive one first. I have since sold this 508, it has a few annoying quirks that might get annoying with time. The ride quality on this GT model was terrible on anything but a perfectly smooth motorway, the interior storage cubbies were all too small to be useful. This particular car cost me £11,000 and the thought of dealing with that depreciation plus having full LED headlights at a cost of over £1000 each made it a bit of a worry to own.
Hi there, very well made video , I am hoping you could tell me where the location of the oil temp sensor is. I have a 2012 2.2 GT sw. Just recently happened the oil gauge has gone up to max. I have done an oil filter and oil change. This hasn't seemed to work so I'm thinking it's the sensor. ? I'm just unsure where the location is
Hi there Chris, im not sure to be honest. Think its one of the sensors at the front of the block down near the oil filters, but just saying that as the old XUD would have it there. Catcar.info is good at looking at parts diagrams, owners clubs are also worth asking on, worst case scenario pay for an hours access to servicebox parts diagrams and see where the sensor is located, it should also have the workshop manual for how to get that sensor out. Although try the owners clubs either forums or facebook pages first.
AW-1 JWS3324 as posted above. We have just done 4 x drain/fills on ours at 59k miles / 95k km and it was definitely ready for changing. Make sure the fluid you purchase is JWS3324 only, rather than a generic fluid that supposedly meets 10 different specifications! We added a bottle of Lubegard transmission fluid conditioner to ours. Make sure you have the transmission oil life counter reset in Peugeot Planet/Citroen Lexia or your transmission will shift exactly the same as before until the counter is reset. This is standard PSA procedure when replacing old fluid with new as the transmission uses the oil life counter to adjust the adaptations as the oil ages. The slightly rough changes on our transmission between 2 & 3 and 3 & 4 all disappeared as soon as the counter was reset to zero. Hope this helps.
@@adrian69644Adrian, you're very welcome. I have used Ravenol on other cars as it sure beats the main stealer prices, although we are using Smith & Allan ATF LV in the 508 as it made the drop/fills very economical whilst being JWS3324 specific and fully synthetic like the original. I know many owners with this transmission do a subsequent drop/fill with each annual service and we may do the same. Best of luck.
peugeot 308 2.0 hdi 120kw with plastic crankcase is there a video of how it is done I heard that there is a problem to do the replacement of the belt because after reporting the cam, please can you see about it?
Hi, I am not sure, i have not changed the timing belt on one of the newer 2.0 engines. The plastic crankscase, is this the sump or rocker cover? Neither should have to come off to get to the timing belt area.
Hi there These are not things i am familiar with, i never had issues with those aspects of the 508 and no longer have the car. Not sure what NBT is either.
Hi thanks for the comment, i do not have a video for the Power steering reservoir. Not something admittedly i look at often. The same suction device used for the oil can be used to drain out what you can, top it up with fresh fluid, drive it for a while and do another flush and then top up. A lot less messy than removing lines. A PAS fluid flush would not have been too necessary on a car of this age, perhaps on an older car. Best to inspect its condition first.
I don't fully understand what you mean by this. The service reminder is not really linked to the battery, and the car will enter economy mode faster if the battery voltage is too low to prevent electrical systems from draining it too fast.
@@peugeotCitroen2CV if the battery voltage too low (bad battery around 6-7v), under this situation and try to crank it up might cause the data lost then affect the service remainder. It sound weird but I facing it before
Best job I have seen ever seen +you show the parts and filter's and oil and I really I Like that i am thinking of buying the same car year 2016 2.0 fap allure 2.0 hdi estate I appreciate it if you can et me know what to look for when buying this Peugeot 508
Thanks very much for the comment. I would say test drive one, test drive the competition, i only kept this a few months i fell out of love very quickly with the 508. Some of the main reasons; - in GT spec the ride quality was abysmal, big french estates are supposed to be smooth the 406 was lovley and supple this crashed over bumps. The 406 could do its top spec with nice leather & wood with soft suspension. Seems now all the top spec pugs all focus on being sporty rather than comfortable which is a shame. Especially as the roads round here seem in much worse state. - the infotainment system was dated, and if the heater was on for any longer than 30 mins the system said it was overheating and that the volume was limited. - interior storage was bad, the central armrest area was tiny, any of the cubbies were tiny only really the door cars available. It doesnt seem major but on a day to day basis it got annoying. - i didnt like the fact the car cost so much and i owned something that was just going to depreciate, the alloys were at risk of getting scratched, and the LED lights while very bright were rare as hens teeth and expensive to replace. - the final nail in the coffin was an irritating trim rattle somewhere above my right ear when driving. Took a lot of it apart and couldnt get to the bottom of it. I sold the 508 and replaced it with a berlingo multispace which was fantastic until it sadly got wrote off, currently driving a 2013 C4 hatchback. If i was looking for an estate to replace the 508 with i have considered an F10 5 series, the volvo V90 also looks nice, just not in a huge rush as the C4 does all i need at the moment. Now an allure might be a bit better, it wont have the big wheels or firm suspension of the GT, possibly a more basic infotainment system and prices surely have dropped a bit since 2020. Mechanically the 2.0 HDi should be a good engine and either automatic or manuals will be good gearboxes.
I had all the leaks 406s could have over the 10 years i drove them. If you have a sunroof the drain tubes blocking are the main thing to inspect, there are also small rivets that hold the wind deflector (it pops up when the sunroof is open) some windscreen sealant in the centre of those rivets also stops that drip. Rear light cluster seals with age can dry out and become less effective at sealing. Evaporation barriers not fitted to the doors, or damaged when repairing a door lock or window mechanism.
@@peugeotCitroen2CV it doesnt have a sun roof, but its only the drivers side the car pet gets wet i dont know if its possible for the car pet to get wet if leaks coolant from the heating element and making the carpet wet but if thats possible then it also be wet on the passenger side. it uses a little bit of coolant i cant see any leaks (not hopening its a head gasket)
@@christianrasmussen6739 If the heater matrix is leaking you will get a sweet or funny anti freeze smell inside the car, if you are using antifreeze in the system that is. Ordinary water leaking into the car will not have a smell. Without the sunroof the only other thing that it can be is the radio antenna base, possibly the windscreen if it was not replaced correctly in the past or the door seals. A coolant pressure tester kit (under £100 on ebay, or get the lend of one) might be a good thing to check to see if there is a leak of coolant somewhere.
@@peugeotCitroen2CV it had the windscreen replaced about 2 months ago i know thats fully sealed it had the driverside door seal replaced 2 weeks ago because i found out that was leaking i have not checked the radio antenna
Thanks for the video. I'm a Hgv mechanic, so I dont get to work on that many cars. I have always owned peugeot diesels myself. I maintain a 308 1.6 hdi 2009 for a neighbour, and last year they bought a 2017 2.0 hdi 308 gt line from the local dealer, and they have asked me about servicing it in future, as I have been maintaining their cars for around 17 years. Would this be the same engine as the 2.0 gt line that they have bought? And do you know if the fuel filter is the same arrangement? I do the work on my driveway, usually at a weekend, and have come across a few newer VW products lately that have been a real pain after a fuel filter change. I have bought new diagnostic that covers fuel bleeding but it looks like it will only work on VW products. Thanks.
The Peugeot 2.0 HDi is the same basic engine in various states of tune. Although there may be subtle differences in the fuel delivery and emissions systems on the engine. The new shape 308 was also offered with the same 2.0 HDI 180 engine as this 508. Not sure if its the exact same fuel filter arrangement as i have not yet worked on one before. Yes i remember doing the first of the VW 1.6 TDi engines for a friend in about 2010 it was a new car, wouldn't start after the filter change needed a computer to bleed it yet these Peugeot engines just activate the lift pump in the tank or else have a fuel primer bulb to bleed the system.
@@peugeotCitroen2CV thanks for the reply. All models of VW products also have a lift pump, but still wont start. I have got away with it by fitting my own priming pump to get the fuel through, but it really is a lot of messing around. Hopefully, with my new diagnostic with this feature, it should be a lot easier in future. I have owned a 306 dturbo with the xud engine for 19 years. Its 23 years old now and covered 221k, I still use it daily. Servicing is so simple, no engine undertray, 5 minute fuel filter change, and the service costs no more than £25 including the oil. I long for those days again.
@@garethjones8047 thanks, any experience with the autos? I only drive auto these days and curious if they're ok. Seems they are standard torque converters made by Aisin, so I imagine they should be fine.
The torque converter i assume will use the same oil as the gearbox. This car was not yet due an automatic gearbox oil change and it is also something on modern autos i just dont touch as there are mobile specialists that can come round with the right equipment and do a proper flush and fill of the oil.
This 508 is not a blue hdi, it is a 2.0 180, there was no adblue for it. It used the Eolys fluid system. I have since sold this car and replaced it with a Berlingo Multispace.
@@peugeotCitroen2CV thanks for the reply, I am going to be owner of bluehdi and thinking what is the big difference between 0w30 an 5w30, because the price is double?
I dont think so a lot of the 1.6 engines dont have the in tank pump, it will only work if you can hear that pump whirring. I have a berlingo with that 1.6 engine, you may need to use a priming tool or use the primer on the filter housing.
hi, great video, my qwuestion is can you buy the 2 white clamps that grip the fuel line in place as mine are broken, they are not leaking but I wish to replace the fuel filter.
Hi there, i dont think so. They are part of the fuel filter housing lid if i recall correctly. A nuisance if they break. I think you might be able to get the lid on its own.
Never did, it was a fairly low mileage relatively young car with a good service history so had no call to. Although to be honest ive done very little work with EGRs apart from the 1.6 HDi one. This 508 is now sold so i will be unable to do the video on it, although i now have a 407 in purely for content purposes which has the 2.0 16v engine, possibly a bit different to this 180bhp engine but its still a 16v DW10 engine.
I have the 2.0 150hp HDI on a 308. With 250kkm, still no problems with EGR or DPF. Just needed to fill up EOLYS liquid. But I'm rarely doing short distances. Perfect car, it just runs. Also doing service and repair (seldom) myself as I don't trust garages no more...
Unfortunately i am not the person to ask, i do not see the point in lowered cars especially a practical family car, the effort and expense results in a car with reduced practicality, less comfort and questionable handling. I actually sold this GT as the ride was far too firm on anything but a perfectly smooth motorway, ive always bought big Peugeots purely for the supple ride comfort, take that away and they loose a huge part of their USP
I miss you in the coolant change show: does not speak about it and do not justify why the air filter and the thick rubber is taken on top of the cooling radiator. Nevertheless, very useful video, thanks for it.
Does not speak about it? What is there to say... The coolant looked old and was probably what was originally filled in the car and due a replacement, there is a paragraph in the video explaining this. The air filter is replaced as it is a service item, an the upper hose is removed from the radiator to flush it out.
Does your oilstick has the marks? I have another war with the same engine from2018 eat6. No min max level in the oilstick... they wirte 0w-30 in my case
The plastic tip of the dipstick on our 2014 508 2.0 HDI 163 broke off in the tube, so the mechanic fished it out. We then bought another genuine PSA dipstick, which broke in the exact same place just a few weeks later but was stuck in the tube. Peugeot parts guy said Peugeot had released a revised dipstick tube, so we ordered one and it came with a dipstick too. The new tube has a slightly different shape and the dipstick inserts/releases without any restriction unlike the original, which was obviously causing the top of the dipstick to break off. A year later and the dipstick is still good.
Hi there, All PSA diesels are belt driven, i do not know exactly what the interval is on these engines. The owners handbook/service history book should say, owners club may be worth asking on. You wouldn't be too far off it being required. I do not have a video covering the belt change in the 508, the newest 2.0 engine i did a video on was the 2.0 16v in the 407.
I have heard of some exotic material called Alooominum, although aluminium for the sump was sufficient on the 406. Plasitc, its not all that uncommon on modern cars. If it works then there is nothing to complain about, haven't had any problems yet with them. They are glass fibre reinforced composite sumps, not sure why they have went down this route for manufacturing them. Im sure they were constrained by emissions regulations etc and plastic sumps were another thing that had to be done. It would be interesting to hear from an actual automotive engineer to understand the material choice and reasons behind it.
@@user-gh7qp7xm2z Holts, its comes in a 5 litre steel drum which then is put into that spray bottle: www.carparts4less.co.uk/p/holts-brake-cleaner-5litre-552996140?gclid=EAIaIQobChMIsrXB6Iek7gIV8EeRBR2xNAygEAQYASABEgJ0WPD_BwE
Generic brake parts cleaner/engine degreaser Holts LOYHMAI0201A Professional Brake and Parts Cleaner, 5L Volume www.amazon.co.uk/dp/B00SFAO1PC/ref=cm_sw_r_cp_api_glt_fabc_BV3PC019A5W637N8QZR3?_encoding=UTF8&psc=1
A superb and overwhelming video with great portion of precious advice! Thanks a lot! I will definitely use it next time changing the air filter. Mine is also 2.0 HDI 180hp. Last time I did it without unplugging, which was quite clumsy (first self-service of a freshly-bought first Peugeot ever) I also try to create such videos, e.g. here's my vid for 508's cabin filter change: th-cam.com/video/bIgqXVy-Xu8/w-d-xo.html. I plan to do more in the future and I will be definitely following your channel! Best regards!
Thank you very much Robert for the kind words. Best of luck wiith the channel you produced a good video there, i have liked and subscribed to it there.
Very common on new cars these days, merc is at it also. Plastic is perhaps being a bit ungenerous. Its glass fibre reinforced plastic so has the required thermal and mechanical properties to be used for this application. Also it doesnt rust like an old pressed steel item.
I no longer own this one, i would not use the same adjective you used above but it had some irritating flaws, the main being the harsh ride quality. A big Peugeot should be supple and comfortable this was not.
Many thanks for this very well made video. As a former mechanic, I can only approve the high quality of the job you carried out. I also love this car, it’s well made and is very pleasant to drive. I will purchase that special funnel as the coolant of my car hasn’t been replaced since years. The service quality you provide to your car is a great assurance that it shouldn’t make any problem. Again thank you for the precious hints you give to me.
I live in Spain. My Peugeot 508 GT 2.0 e-HDI 180CV uses Total Ineo First 0w30 and I always use the original Peugeot anticoolant that has blue colour.
Thank you for the video.
You made excellent tutorial video, I've been looking for it for 2 years! Thanks!
Thanks, great to hear that it has helped
I have a 2014 508, the 2.0 blue hdi. Seems very similar except that 0 W30 fully synthetic is recommended. Great video btw.
Thanks for the comment
Hi, same thing as other comments, I live in France, and the recommended oil in my Owners Manual is Total Ineo First 0w30 with the norm peugeot - B71 2312
Hi friend, thats a brilliant service video, im so thankful for you, from Hungary!
Top video, keeping a link in my bookmarks for when the weather gets a bit nicer up north! 508 is a lovely drive too. Thanks 👍
Hope it helps when the weather improves a bit.
The 508 hmmm, i fell out with this one GT spec wheels and suspension were far too firm to be practical, it handled extremely well but on rural roads where it was used the majority of the time it was unpleasant. Lower spec models with smaller wheels i think were better.
Ended up selling this and buying a berlingo multispace
You made the perfect video my friend ! Absolutely perfection ! Well done ! Greede
Thank you very much for the comment
@@peugeotCitroen2CV where can i get Peugeot 508 parts at a reasonable price
@@mugogwata8638
What parts?
Service parts i just bought from the local motor factors. If it was headlights for this GT model well that’s partially why i sold this car as i never wanted to have to fork out 4 figures for a headlight
This is an excellent video, well done and thank you very much!
Thanks for the comment
Wish you safe miles with your new car! :-) Peugeot is rockin' ✌️💪
Thanks for the comment, they really have improved the quality of their cars in the past few years. the 10 or so years after the 406 the cars were fairly sound mechanically but the exterior styling was a bit ugly, their current range is stunning which is great to see.
@@peugeotCitroen2CV yes I agree with you especially the new 508 is in my opinion the best looking car right now... :-)
2016 peugeot hired new ppl from germany same as bmw to help them improve the quality of the cars.
Anyway is it same to use breakcleaner inside the fuelfilter housing?
Thanks for the video. Great video editing. Everything is clear 👍
Thanks for the comment.
@@peugeotCitroen2CV did you top-up adblue?
@@robbero this was not an adblue car
i just did the oil change on mine's. i used total 0w30 oil. 5liters
Thanks a lot for the explanation.
Thank you for the amazingly clear made video. I learned a lot.
Do i have to change automatic gearbox oil in my 2016 Peugeot 508 bluehdi 180?
The car has 245 000 km
Great video. I learned a lot of useful things for myself. Thank you. My Citroen c5 Aircross has the same engine.
Thanks for the comment, how do you find the C5 aircross. Does it have the progressive bump stops in the suspension, always been interested to try one to compare against an old hydropneumatic citroen.
clean job
Another great vid.. I have a T7 308 with this engine.. altho it has a hand primer for the fuel filter.
It would be good fun that engine in the 308
I’m sure it’s the same engine, this engine would be too powerful for that car
Thank you for the vidéo I hope your Peugeot give you great pleasure 😊 have a good week 😊
Thanks for the comment
Wow! Well done! I'd like that you are so accurate. I have got 2 questions. Do you use flush fluids like Liqui Moly 2662? Could you tell me what cleaner do you use to clean parts?
Hi there, thanks for the comment.
Generally on the likes of this 'modern' diesel with all its emissions gubbins i read the service handbook carefully and stick to the exact oil it recommends. I do recall that it advised against the use of flushing fluids.
Now i have an old Avantime V6 in the shed at the moment that lay up for 7 years, got it started but it ran with a top end tick. There was nothing to loose by running a flush through it and sure enough after 20 mins of the flush the engine sounded nice and smooth. Although thats an old petrol and worth considerably less where a spare engine from a laguna was available to swap in if it was beyond repair. Unfortunately flushes are a bit of a gamble in that regard.
As for cleaning parts, the spray bottle stuff. I just use ordinary brake parts cleaner that comes in a 5l can, i think it is holts.
Hello friend... I am writing to you from Argentina, here comes the entire range of PSA (Peugeot, Citroen and DS) with diesel engines. I have a 408 1.6 hdi 115cv (with no active DPF, it means that it is a filter equal to the DPF but it does not have an AdBlue (urea) injector in the DPF nor a diesel injector in the DPF (just like the chevrolet cruze 2.0 comes VCDi 163cv (I also had this vehicle first)) and for me Motor (DV6 9HCG) can take 0w 30 inneo first (always total for PSA engines), up to a certain mileage, and then I can use Quartz 9000 5w-40 or failing that, always use 5w-40. The important thing I want to leave you from the msg is that your engine must use ACEA C1 certified oil, it is low-SAPS with that oil you will have much fewer problems with the DPF clogging. video you have put 5w-30 ACEA C2 Mid-Saps, that oil is for the 1.6 THP gasoline engine, and precisely that engine has Mid-SAPS because gasoline does not generate sulfate particles/ashes, so there is a compensation for "medium sulfates " on the oil side and practically "zero sulfates" on the naphtha; diesel does generate a lot of sulfate particles/ash (a good diesel fuel can have a minimum of 50pp of sulfur (which is later transformed into ash), with that amount engineers are required to design an oil that has at least or more than 250pp of sulfur (Mo / molybdenum (as opposed to Mo, always keep in mind that Mo2 Molybdenum disulfide is not good for these new diesel engines)
Hi there
Thanks for the info. Modern diesels are a proper headache when it comes to oil grades. I thought at the time this was the correct oil but interesting to read its not 100% either
DPF clogging is not the worst that could happen to a vehicle. Poor lubrication would reverse any gains of protecting the DPF and even cause long term engine damage. I personally would go with C2/C3 oil with high HTHS.
Hi nice video. Can u please show video how to change gearbox oil in peugeot 508 i got 1.6 ehdi think its almost the same on this.
Hi there, unfortunately i do not have access to a 508 1.6. At some time i may do a gearbox oil change on my berlingo 1.6 HDi which will be similar but it will not be happening soon.
Really good video it's my first Diesel car so I was wondering how coolant change was done it's no different than a petrol I was told otherwise
Hi there thanks for the comment, yes its still quite the same method of cooling the engine.
Also, it is not really clear why you didn't remove oil filler cap before removing oil...
I suppose it makes it pour out the oil quicker but i never remove it on any cars come to think about it, as i usually go about checking other aspects like the suspension buses or brakes while it drains. It still all drains out, to be honest i cant imagine it slows it down a great amount as the crankcase breather means its not a sealed area preventing the oil from pouring out.
Amazing video! thank You
no, hdi engines have special additives for dpf filters, look in front of rear right wheel you wil see a small box, inside is a plastick bag with black liquid that is additive that is sprajed into dpf filter to burn it off, hdi engines are one off the best diesel engines today, my Citroën c5 2009 got 578.000 km and still going strong, driven acros all off Australia
The eolys fluid, is that all they use to burn off the soot? This is my first car with a DPF although i know some of the non PSA systems ran the car rich to burn off the soot. The HDi engines are great seem to be very reliable as modern diesels go.
@@peugeotCitroen2CV yes that's it
Yes, ALL peugeot's use EOLYS fluid so there is ZERO engine oil dilution issues like you get in pretty much every other diesel car. Friends use to moan but I would rather pay £120 per 100k miles than pay for an engine rebuild.....
Great video mate i live in aus and just got the same car 2016 508 allure 2.0 diesel first diesel car the dealer seemed abit dodgy are you able to make a video for somone who doesn't know what there looking at a step by step guide on the best way to maintain and service this car. Cheers!
thanks for sharing the video , please could have your thoughts on how it drives and what you think of the car overall , i was thinking about getting one early part of this year but ended up getting a Hyundai I40 estate not a bad car but not really exciting to drive and had a few things replaced under warranty.
thank you for your time to reply
Very good video
Thank you! 💪💪
On the 2.0 hdi do the dipstick not show correctly. I bought my car and noticed the dipstick was broken and bought a new one. Aster servicing it now says oil invalid on the display, I've read online and ppl say to cut the dipstick tube, is that right?
Hi there,
Not aware of it being an issue on this engine. However on the old old 8v HDi fitted to the 406 and xsara the dipstick could break off and the sump had to be removed to retrieve the stick part of it.
After servicing "oil invalid measurement" means you have too much oil in the engine. Also the FAP is not working at all. Check the level oil with a genuine dipstick, assure correct level (UNDER the Maximum level on the dipstick) and reset again the service interval. I did it so and now every think is o.k.
Bon travail, ✅📣
Don't supposed you remember how much antifreeze the cooling system took? We've just had ours done and supplied the garage with 12L of ready-mixed and the car was returned with 8L unused after they flushed the system with tap water. They said it would only take 4L!
I can’t remember the exact mix, thought the video had it in the subtitles
Definitely was under 5 litres as thats the size of bottle i buy from the motor factors
@@peugeotCitroen2CV Thanks for the reply. I saw the 5L container in the video but I couldn't see if it was premixed or concentrated?
Ours looked the same dirty colour as yours and whilst it has never moved from the MAX line in 12 months, it had a slightly oily texture to it, although I couldn't see any oil and the expansion bottle was clean plus no Mayo on the dipstick or filler plug. Don't suppose you remember if yours had a similar texture, which I'm hoping is just down to age (suspect 7 Yr old original antifreeze) rather than a leaking oil or transmission cooler?
I agree on the firm ride as we were looking for a GT but settled on the Allure after driving the former as it's basically the same spec minus leather and drivers seat memory but you gain the smaller 18" wheels, which ride much better, although the GT does have the fancier front suspension setup.
Brilliant video! 👍
@@dontcare32123 The bottle i used was concentrated, there was a certain dilution with water when it went into the car.
I cant remember if there was an oily texture although you can get some bizzare patterns on old anti freeze, flush it all out and refill with new antifreeze. Keep an eye on the condition of the new stuff.
With regards the allure, was it the GT or the 2.0 engines that got the double wishbones up front? I know the 1.6 has standard mcpherson struts but thought the 2.0 engines were upgraded.
Excellent video 👍
Thanks for the comment
I don't understand how the handbook can have a mistake this big. 2.0 Bluehdi engines run on 0w30 oil, specifically Total Ineo First 0w30 not Total Quart Ineo ECS 5w30 wich was the oil used for the old Euro5 engines. The oil required must have the PSA B71 2312 approval, wich only 0w30 oils have. The engine will be very happy with the oil you used, but the DPF won't.
Im glad i took a picture of the handbook and included it in the video for this exact reason.
This particular car was not a blue HDi version if that makes any difference, they came a bit later in the 508 range.
@@peugeotCitroen2CV if it’s the older Euro5 the handbook is correct. I thought from the title that it had 180hp, wich is bluehdi euro6.
@@ionescugeorge2003
It was the 180bhp engine but not a blue HDi, that seemed to come in about 2016, this was a 2015 car. I remember at the time asking on the owners club if it was a blue hdi but apparently not.
Sold now though, the ride quality was terrible
Hi thanks for the great video !! So helpful.
What is in your spray to clean the oil and dust ?
Hi there thanks for the comment
The spray is just standard brake & clutch cleaner i buy it in a 5l drum and fill the sprayer with it, i think its holts branded stuff
@@peugeotCitroen2CV Thank you
Very good video! Thanks, pal!
Which car do you recommend, normal or hybrid?
2012 year is ok? Some problem with "hybrid battery"?
Hi there
I never seen the point in the hybrid 4 system on the 508. Unnecessarily complicated and i think most reviews pointed out it did not really show any significant real world improvement. Especially without a plugin version that would mean say a range of 30 miles without the engine.
The 2.0 is powerful and reasonably economical. A word of warning test drive one first. I have since sold this 508, it has a few annoying quirks that might get annoying with time. The ride quality on this GT model was terrible on anything but a perfectly smooth motorway, the interior storage cubbies were all too small to be useful. This particular car cost me £11,000 and the thought of dealing with that depreciation plus having full LED headlights at a cost of over £1000 each made it a bit of a worry to own.
Hi there, very well made video , I am hoping you could tell me where the location of the oil temp sensor is. I have a 2012 2.2 GT sw. Just recently happened the oil gauge has gone up to max. I have done an oil filter and oil change. This hasn't seemed to work so I'm thinking it's the sensor. ? I'm just unsure where the location is
Hi there Chris, im not sure to be honest. Think its one of the sensors at the front of the block down near the oil filters, but just saying that as the old XUD would have it there.
Catcar.info is good at looking at parts diagrams, owners clubs are also worth asking on, worst case scenario pay for an hours access to servicebox parts diagrams and see where the sensor is located, it should also have the workshop manual for how to get that sensor out. Although try the owners clubs either forums or facebook pages first.
Thank you. Great and informativ video.
Thanks for the comment
Hi please need some infos about automatic transmission fluids changement on this car
When and what oil to use thanks
Hi, unfortunatley i have no idea about the Automatic Transmission fluid. Sold this car now and never looked into that issue.
AW-1 JWS3324 as posted above. We have just done 4 x drain/fills on ours at 59k miles / 95k km and it was definitely ready for changing.
Make sure the fluid you purchase is JWS3324 only, rather than a generic fluid that supposedly meets 10 different specifications! We added a bottle of Lubegard transmission fluid conditioner to ours.
Make sure you have the transmission oil life counter reset in Peugeot Planet/Citroen Lexia or your transmission will shift exactly the same as before until the counter is reset. This is standard PSA procedure when replacing old fluid with new as the transmission uses the oil life counter to adjust the adaptations as the oil ages. The slightly rough changes on our transmission between 2 & 3 and 3 & 4 all disappeared as soon as the counter was reset to zero. Hope this helps.
@@adrian69644Adrian, you're very welcome. I have used Ravenol on other cars as it sure beats the main stealer prices, although we are using Smith & Allan ATF LV in the 508 as it made the drop/fills very economical whilst being JWS3324 specific and fully synthetic like the original.
I know many owners with this transmission do a subsequent drop/fill with each annual service and we may do the same. Best of luck.
peugeot 308 2.0 hdi 120kw with plastic crankcase is there a video of how it is done I heard that there is a problem to do the replacement of the belt because after reporting the cam, please can you see about it?
Hi,
I am not sure, i have not changed the timing belt on one of the newer 2.0 engines. The plastic crankscase, is this the sump or rocker cover? Neither should have to come off to get to the timing belt area.
can you change:
1. Speedmedome 2015 to 2019
2. NBT and all control area 2015 to 2019
Hi there
These are not things i am familiar with, i never had issues with those aspects of the 508 and no longer have the car. Not sure what NBT is either.
It's a great video.^^ Is there a video of how to clean the power Steering. reserve tank? reserve tank Do I have to separate them?
Hi thanks for the comment, i do not have a video for the Power steering reservoir. Not something admittedly i look at often. The same suction device used for the oil can be used to drain out what you can, top it up with fresh fluid, drive it for a while and do another flush and then top up. A lot less messy than removing lines. A PAS fluid flush would not have been too necessary on a car of this age, perhaps on an older car. Best to inspect its condition first.
I think the service reminder might cause by the battery die completely 😅
I don't fully understand what you mean by this.
The service reminder is not really linked to the battery, and the car will enter economy mode faster if the battery voltage is too low to prevent electrical systems from draining it too fast.
@@peugeotCitroen2CV if the battery voltage too low (bad battery around 6-7v), under this situation and try to crank it up might cause the data lost then affect the service remainder. It sound weird but I facing it before
Best job I have seen ever seen +you show the parts and filter's and oil and I really I Like that i am thinking of buying the same car year 2016 2.0 fap allure 2.0 hdi estate I appreciate it if you can et me know what to look for when buying this Peugeot 508
Thanks very much for the comment.
I would say test drive one, test drive the competition, i only kept this a few months i fell out of love very quickly with the 508. Some of the main reasons;
- in GT spec the ride quality was abysmal, big french estates are supposed to be smooth the 406 was lovley and supple this crashed over bumps. The 406 could do its top spec with nice leather & wood with soft suspension. Seems now all the top spec pugs all focus on being sporty rather than comfortable which is a shame. Especially as the roads round here seem in much worse state.
- the infotainment system was dated, and if the heater was on for any longer than 30 mins the system said it was overheating and that the volume was limited.
- interior storage was bad, the central armrest area was tiny, any of the cubbies were tiny only really the door cars available. It doesnt seem major but on a day to day basis it got annoying.
- i didnt like the fact the car cost so much and i owned something that was just going to depreciate, the alloys were at risk of getting scratched, and the LED lights while very bright were rare as hens teeth and expensive to replace.
- the final nail in the coffin was an irritating trim rattle somewhere above my right ear when driving. Took a lot of it apart and couldnt get to the bottom of it.
I sold the 508 and replaced it with a berlingo multispace which was fantastic until it sadly got wrote off, currently driving a 2013 C4 hatchback. If i was looking for an estate to replace the 508 with i have considered an F10 5 series, the volvo V90 also looks nice, just not in a huge rush as the C4 does all i need at the moment.
Now an allure might be a bit better, it wont have the big wheels or firm suspension of the GT, possibly a more basic infotainment system and prices surely have dropped a bit since 2020. Mechanically the 2.0 HDi should be a good engine and either automatic or manuals will be good gearboxes.
Coolant came back brown again at the end why?
It was red at the end
Have you experienced wet car pet on drivers side (LHD) on peugeot 406 and if you have what was the reason for the wet carpet
I had all the leaks 406s could have over the 10 years i drove them.
If you have a sunroof the drain tubes blocking are the main thing to inspect, there are also small rivets that hold the wind deflector (it pops up when the sunroof is open) some windscreen sealant in the centre of those rivets also stops that drip.
Rear light cluster seals with age can dry out and become less effective at sealing.
Evaporation barriers not fitted to the doors, or damaged when repairing a door lock or window mechanism.
@@peugeotCitroen2CV it doesnt have a sun roof, but its only the drivers side the car pet gets wet i dont know if its possible for the car pet to get wet if leaks coolant from the heating element and making the carpet wet but if thats possible then it also be wet on the passenger side. it uses a little bit of coolant i cant see any leaks (not hopening its a head gasket)
@@christianrasmussen6739
If the heater matrix is leaking you will get a sweet or funny anti freeze smell inside the car, if you are using antifreeze in the system that is. Ordinary water leaking into the car will not have a smell. Without the sunroof the only other thing that it can be is the radio antenna base, possibly the windscreen if it was not replaced correctly in the past or the door seals.
A coolant pressure tester kit (under £100 on ebay, or get the lend of one) might be a good thing to check to see if there is a leak of coolant somewhere.
@@peugeotCitroen2CV it had the windscreen replaced about 2 months ago i know thats fully sealed it had the driverside door seal replaced 2 weeks ago because i found out that was leaking i have not checked the radio antenna
Thanks for the video. I'm a Hgv mechanic, so I dont get to work on that many cars. I have always owned peugeot diesels myself. I maintain a 308 1.6 hdi 2009 for a neighbour, and last year they bought a 2017 2.0 hdi 308 gt line from the local dealer, and they have asked me about servicing it in future, as I have been maintaining their cars for around 17 years. Would this be the same engine as the 2.0 gt line that they have bought? And do you know if the fuel filter is the same arrangement? I do the work on my driveway, usually at a weekend, and have come across a few newer VW products lately that have been a real pain after a fuel filter change. I have bought new diagnostic that covers fuel bleeding but it looks like it will only work on VW products. Thanks.
The Peugeot 2.0 HDi is the same basic engine in various states of tune. Although there may be subtle differences in the fuel delivery and emissions systems on the engine. The new shape 308 was also offered with the same 2.0 HDI 180 engine as this 508. Not sure if its the exact same fuel filter arrangement as i have not yet worked on one before.
Yes i remember doing the first of the VW 1.6 TDi engines for a friend in about 2010 it was a new car, wouldn't start after the filter change needed a computer to bleed it yet these Peugeot engines just activate the lift pump in the tank or else have a fuel primer bulb to bleed the system.
@@peugeotCitroen2CV thanks for the reply. All models of VW products also have a lift pump, but still wont start. I have got away with it by fitting my own priming pump to get the fuel through, but it really is a lot of messing around. Hopefully, with my new diagnostic with this feature, it should be a lot easier in future. I have owned a 306 dturbo with the xud engine for 19 years. Its 23 years old now and covered 221k, I still use it daily. Servicing is so simple, no engine undertray, 5 minute fuel filter change, and the service costs no more than £25 including the oil. I long for those days again.
@@garethjones8047is this 2.0hdi reliable?
@@ln5747 Yes they seem a good unit, no problems with this one so far
@@garethjones8047 thanks, any experience with the autos? I only drive auto these days and curious if they're ok. Seems they are standard torque converters made by Aisin, so I imagine they should be fine.
Добрый день. Подскажите а что за масло между мотором и коробкой. Спасибо.
The torque converter i assume will use the same oil as the gearbox. This car was not yet due an automatic gearbox oil change and it is also something on modern autos i just dont touch as there are mobile specialists that can come round with the right equipment and do a proper flush and fill of the oil.
Hi, very usefull video! Want to ask, PSA suggest only 0w30 oil for bluehdi, what do you think, I saw that you use 5w30?
This 508 is not a blue hdi, it is a 2.0 180, there was no adblue for it. It used the Eolys fluid system.
I have since sold this car and replaced it with a Berlingo Multispace.
@@peugeotCitroen2CV thanks for the reply, I am going to be owner of bluehdi and thinking what is the big difference between 0w30 an 5w30, because the price is double?
Hi. I have 308 1.6 BlueHDI 2015 and I want change fuel filter. U think tip with ingnition on-off 10 times will work as well? Thanks for great video.
I dont think so a lot of the 1.6 engines dont have the in tank pump, it will only work if you can hear that pump whirring. I have a berlingo with that 1.6 engine, you may need to use a priming tool or use the primer on the filter housing.
My picasso make black smoke and it is very loud in the cabine what's the problem
Black smoke is an old diesel issue, egr valve may be stuck, or a blocked air filter making it run too rich.
Noise im not sure what sort of noise?
Hi any problems with the car?
@@aluyal9288
I didnt get on with the car at all, ended up selling it and getting a berlingo multispace which suited me much better
hi, great video, my qwuestion is can you buy the 2 white clamps that grip the fuel line in place as mine are broken, they are not leaking but I wish to replace the fuel filter.
Hi there, i dont think so. They are part of the fuel filter housing lid if i recall correctly. A nuisance if they break. I think you might be able to get the lid on its own.
thanks, im due for another service soon so i might try and buy the lid.@@peugeotCitroen2CV
Hello, have you ever changed EGR valve on this car? If you plan to do, could you make a video for that? Thank you nice video!
Never did, it was a fairly low mileage relatively young car with a good service history so had no call to. Although to be honest ive done very little work with EGRs apart from the 1.6 HDi one.
This 508 is now sold so i will be unable to do the video on it, although i now have a 407 in purely for content purposes which has the 2.0 16v engine, possibly a bit different to this 180bhp engine but its still a 16v DW10 engine.
I have the 2.0 150hp HDI on a 308. With 250kkm, still no problems with EGR or DPF. Just needed to fill up EOLYS liquid. But I'm rarely doing short distances.
Perfect car, it just runs. Also doing service and repair (seldom) myself as I don't trust garages no more...
Hi there, I want to drop my 508 saloon to deck , and fit body arches to it how low could I go without damage?
Unfortunately i am not the person to ask, i do not see the point in lowered cars especially a practical family car, the effort and expense results in a car with reduced practicality, less comfort and questionable handling. I actually sold this GT as the ride was far too firm on anything but a perfectly smooth motorway, ive always bought big Peugeots purely for the supple ride comfort, take that away and they loose a huge part of their USP
How to bleed the fuel system
😄
Hi there, is this a question you have or something not sufficiently covered in the video?
I miss you in the coolant change show: does not speak about it and do not justify why the air filter and the thick rubber is taken on top of the cooling radiator. Nevertheless, very useful video, thanks for it.
Does not speak about it? What is there to say...
The coolant looked old and was probably what was originally filled in the car and due a replacement, there is a paragraph in the video explaining this.
The air filter is replaced as it is a service item, an the upper hose is removed from the radiator to flush it out.
@@peugeotCitroen2CV ...thank you very much, this video gave me the most help in maintaining my 508.
Does your oilstick has the marks? I have another war with the same engine from2018 eat6. No min max level in the oilstick... they wirte 0w-30 in my case
I think it did, cant actually remember the car has since been sold
The plastic tip of the dipstick on our 2014 508 2.0 HDI 163 broke off in the tube, so the mechanic fished it out. We then bought another genuine PSA dipstick, which broke in the exact same place just a few weeks later but was stuck in the tube.
Peugeot parts guy said Peugeot had released a revised dipstick tube, so we ordered one and it came with a dipstick too. The new tube has a slightly different shape and the dipstick inserts/releases without any restriction unlike the original, which was obviously causing the top of the dipstick to break off. A year later and the dipstick is still good.
Hello I got same car 508 sw gt 180bhp. Its done 84k does it have cambelt or chain. Would it need changing
Hi there,
All PSA diesels are belt driven, i do not know exactly what the interval is on these engines. The owners handbook/service history book should say, owners club may be worth asking on. You wouldn't be too far off it being required. I do not have a video covering the belt change in the 508, the newest 2.0 engine i did a video on was the 2.0 16v in the 407.
@@peugeotCitroen2CV ok thanks, yeh the 180bhp has chain. You can see it when you took oil cap off
@@GOOFYGUY478
Its a belt driven engine but a chain is used to link the two camshafts
@@peugeotCitroen2CV ok thanks, was confused. Gave me better understanding. Your video is great hopefully when I do service turns out like yours.
what antifreeze you bought? it must be psa dont find red :/
I believe that it was comma 5 year antifreeze, from the local motor factors.
Plastic sumps if only they had thought of a stronger long lasting thing maybe call it metal.
I have heard of some exotic material called Alooominum, although aluminium for the sump was sufficient on the 406.
Plasitc, its not all that uncommon on modern cars. If it works then there is nothing to complain about, haven't had any problems yet with them. They are glass fibre reinforced composite sumps, not sure why they have went down this route for manufacturing them. Im sure they were constrained by emissions regulations etc and plastic sumps were another thing that had to be done. It would be interesting to hear from an actual automotive engineer to understand the material choice and reasons behind it.
What the liquid do you use to clean the engine?
Brake parts cleaner
@@peugeotCitroen2CV thank you very much
which manufacturer?
@@user-gh7qp7xm2z
Holts, its comes in a 5 litre steel drum which then is put into that spray bottle:
www.carparts4less.co.uk/p/holts-brake-cleaner-5litre-552996140?gclid=EAIaIQobChMIsrXB6Iek7gIV8EeRBR2xNAygEAQYASABEgJ0WPD_BwE
@@peugeotCitroen2CV thanks. I think it's impossible to buy one in my country
What kind of cleaner spray you use?
Generic brake parts cleaner/engine degreaser
Holts LOYHMAI0201A Professional Brake and Parts Cleaner, 5L Volume www.amazon.co.uk/dp/B00SFAO1PC/ref=cm_sw_r_cp_api_glt_fabc_BV3PC019A5W637N8QZR3?_encoding=UTF8&psc=1
Were are you based I've got 16plate 508 sw any chance you can service mine ?
Hi i am in Northern Ireland
However i don't offer to do this sort of work, i have a full time job as an Engineer this is only a bit of a hobby.
Oh I see no worries appreciate the time for your response
No. 1!
Thanks for the comment
A superb and overwhelming video with great portion of precious advice! Thanks a lot! I will definitely use it next time changing the air filter. Mine is also 2.0 HDI 180hp. Last time I did it without unplugging, which was quite clumsy (first self-service of a freshly-bought first Peugeot ever) I also try to create such videos, e.g. here's my vid for 508's cabin filter change: th-cam.com/video/bIgqXVy-Xu8/w-d-xo.html.
I plan to do more in the future and I will be definitely following your channel! Best regards!
Thank you very much Robert for the kind words.
Best of luck wiith the channel you produced a good video there, i have liked and subscribed to it there.
@@peugeotCitroen2CV Thank you too! Good luck with your work and videos either!
Nice car mate health to drive er
What the hell, oil pan is plastic..? Oh come on...
Very common on new cars these days, merc is at it also. Plastic is perhaps being a bit ungenerous. Its glass fibre reinforced plastic so has the required thermal and mechanical properties to be used for this application.
Also it doesnt rust like an old pressed steel item.
I owe a 508 2016. Absolutely shit cars
I no longer own this one, i would not use the same adjective you used above but it had some irritating flaws, the main being the harsh ride quality. A big Peugeot should be supple and comfortable this was not.