how to repair 12v lead acid battery | fill water in bike battery

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ต.ค. 2024
  • how to repair 12v lead acid battery | fill water in bike battery
    Hey Folks , in this video I have shown :-
    How to repair dead lead acid battery | DIY
    #leadacidbatteryrecycle
    MATERIALS REQUIRED:-
    -Multimeter
    -Lead acid battery charger
    -Dead battery
    -Distilled water (you can also use rain water)
    -Rubber gloves
    -Screwdriver
    Optional
    -Flashlight
    -Super Glue
    -Paper towel
    -Syringe
    STEP 2: MEASURE BATTERY VOLTAGE
    Connect multimeter to your battery and check voltage
    Your battery shoudnt be lower than 11.8v (30%) in open circuit
    If you read lower than that you will need to revive it if its higher than that try to just charge it
    100% = 12.73 v
    90% = 12.62 v
    80% = 12.50 v
    70% = 12.37 v
    60% = 12.24 v
    50% = 12.10 v
    40% = 11.96 v
    30% = 11.81v
    20% = 11.66 v
    10% = 11.51v
    STEP 3: INSPECT THE CELLS
    Place paper towels on your working areas
    Now if you have SLA or maintenance free battery you will need to remove lid with screwdriver
    Put on gloves and remove caps
    Do this in well ventilated area
    Wipe any wet spots with a paper towel
    Then look inside cells and you should see white fabric that is dry
    If you see brown fabric with white lumps your battery is probably sulfated and your chance of reviving battery is really bad.
    STEP 4: ADD WATER
    Take a syringe and fill each cell with water and look if fabric is absorbing water
    Slowly shake battery and let it rest for 10 minutes.
    #repairbattery
    #deadbatteries
    #leadacidbatteryrepair
    #howtorepairbattery
    #distilledwater
    ............ALL THE BEST...........

ความคิดเห็น • 8

  • @marloncruz6761
    @marloncruz6761 2 หลายเดือนก่อน +1

    Pwd poba icharge sa solar panel?

  • @shubhamsarjine4531
    @shubhamsarjine4531 3 ปีที่แล้ว +1

    I have a 1 problem sir please reply
    I have a 5 3.7v 2200mah battery
    And 4v 5.5w led strip so I connect all battery in perrellel connection . Voltage ok but how control wattage for more time battery backup . please explain me .

  • @checkinginformation6991
    @checkinginformation6991 3 ปีที่แล้ว +2

    Nice explanation. This video worth for watching.its really helpful for me thanks for this video

  • @vincentfamorcan8828
    @vincentfamorcan8828 11 หลายเดือนก่อน +1

    boss oks lng ba pag bagong bile battery. lagyan agad ng sulfur acid?

    • @divyadeenu1686
      @divyadeenu1686 8 หลายเดือนก่อน

      Don't apply sulfuric acid

  • @Vamsi_Edits_1549
    @Vamsi_Edits_1549 3 ปีที่แล้ว +1

    Keep moving on macha