Matco is missing the mark with the pricing on these new releases. They had a chance to undercut Snap-on's BJP1 with that new kit and instead priced it $100 over. The new Prydrivers are also about $40 each ($120 for the set) which can buy you a lot of demo drivers (Milwaukee 48-22-2860 and/or Klein 602-4DD plus 602-7DD).
Ordering a diesel medic shirt and stickers (if available) today! Love supporting fellow small business’. Thank you for your hard work Clay, Also! If you ever need any technology repaired, anything from an iPhone all the way up to your cameras we got your back!
Im only 22 and while at work all I did was lean over to grab my tools off the ground to put up and as best as I can remember as soon as i went to stretch my arm to grab i felt something pop And shift on my shoulder and immediately after got the worst jabbing pain in my left shoulder. It was December 24th. Spent the next 4 days unable to use my arm and every single tiny baby twitch of my arm would send the sharpest pain down my arm and somewhat down my neck to mid spine. After the 4 days i was finally able to get into an open chiropractor and after some x-rays discovered I dislocated my shoulder and in the process it tore my rotator cuff and something else and had kinked one of the invertebrates in my neck. Worst 4 days of my life and the following week or 2 of healing after putting it back in werent that fun either!! All from reaching to pick up a couple tools. And I had just an hour prior done a set of 4 tires that were 35s for a pickup and didn't have any issues or moments were id of thought contributed to my shoulder incident. And that btw was the first time in my 22 years that I've ever dislocated my shoulder and of course its the left one, I'm left handed lol.. 6 months later and now I have moments everyday where when in certain positions while pushing or pulling i can feel when something is fixing to happen and I have to stop and readjust my position and itll go away lol God I hate it
Now does that ball joint kit also have a sold separate master cup kit as well? Love the kit and will be seriously considering it in the near future but the lack up chips in that kit discourage me a little
Man ive looked at those otc pullers and when you add in all the attachments its more than the snap on one. The snap on one has a grease fitting and its made for an impact and they do not bend.
Great video. Lookin forward to meet up. Wish I could make it, but I dont think my pickup can make it there fast enough to be on time. That, and I'm bbqin ribs and burnt ends. Gotta babysit that.
Blue matco ratchet? I dnt think they make one yet or couldn't find it on the website just orange green red and pink only blue matco I've ever seen was in the thumbnail of one of the videos clay made about it requesting a blue one
That is so cool that hes got his wife working with him
The Snap-On BJP-1 remains king of the hill.
Cases for special tools like that, absolutely. Cases for every little tool/set? I'd need a box the size of Michael's truck lol
cases take a lot of space, but damn I love em! haha
A bunch of great tools once again. Thanks for showing us the video and tools. Take care and stay safe.
Matco is missing the mark with the pricing on these new releases. They had a chance to undercut Snap-on's BJP1 with that new kit and instead priced it $100 over. The new Prydrivers are also about $40 each ($120 for the set) which can buy you a lot of demo drivers (Milwaukee 48-22-2860 and/or Klein 602-4DD plus 602-7DD).
Snap on is $735 I can’t see buying the matco/otc for this price. Matco has gotten a little carried away with some of the prices
Down south is my jam now, thanks Koon
I'm so old, some mornings I wake up and my beard hurts
Good seeing Bill on the truck.
Matco Blue Ratchets I hear are coming to my dealer in 2-3 weeks.
Always great videos Clay!!! Keep em coming!!!
Im waiting for my dealer to get them he showed me after I bought a set a screwdrivers and i said these some nice prybars haha
Whats the dog gone part number?
Thanks for the video Clay. I have the original OTC kit and the Snap On BJP1. Each has its uses
Great video y'all have a great weekend and stay safe 👍
Flag is hung incorrectly
Ordering a diesel medic shirt and stickers (if available) today! Love supporting fellow small business’. Thank you for your hard work Clay,
Also! If you ever need any technology repaired, anything from an iPhone all the way up to your cameras we got your back!
That’s awesome thank you.
Lol so otc is now making a ball joint kit like snap on and charging more. Wow
Great Video
Is that guy in grey sitting
Got a set of them prydrivers on order. Supposed to be USA made.👍
What is the best balljoint/u joint press service kit to get, if you can buy and use only one and money wasnt an option?
Did he just say around $900.00 ? WoW......
Im only 22 and while at work all I did was lean over to grab my tools off the ground to put up and as best as I can remember as soon as i went to stretch my arm to grab i felt something pop And shift on my shoulder and immediately after got the worst jabbing pain in my left shoulder. It was December 24th. Spent the next 4 days unable to use my arm and every single tiny baby twitch of my arm would send the sharpest pain down my arm and somewhat down my neck to mid spine. After the 4 days i was finally able to get into an open chiropractor and after some x-rays discovered I dislocated my shoulder and in the process it tore my rotator cuff and something else and had kinked one of the invertebrates in my neck. Worst 4 days of my life and the following week or 2 of healing after putting it back in werent that fun either!! All from reaching to pick up a couple tools. And I had just an hour prior done a set of 4 tires that were 35s for a pickup and didn't have any issues or moments were id of thought contributed to my shoulder incident. And that btw was the first time in my 22 years that I've ever dislocated my shoulder and of course its the left one, I'm left handed lol.. 6 months later and now I have moments everyday where when in certain positions while pushing or pulling i can feel when something is fixing to happen and I have to stop and readjust my position and itll go away lol God I hate it
Ouch that sucks
Hey you should check out BJP18100 bj press from Matco. We've had that at our shop for awhile now and it's a beast.
Now does that ball joint kit also have a sold separate master cup kit as well? Love the kit and will be seriously considering it in the near future but the lack up chips in that kit discourage me a little
No notification, come on TH-cam.
omg same ughhhhh
Man ive looked at those otc pullers and when you add in all the attachments its more than the snap on one. The snap on one has a grease fitting and its made for an impact and they do not bend.
I really want the ball joint press, but I already have one.
I use my balljoint press for a few things
I probably missed it but where did you bury Wally?
He is no longer working for them. He left to work somewhere else. Was in a prior video.
Wally went back to the shop he had come from
Great video. Lookin forward to meet up. Wish I could make it, but I dont think my pickup can make it there fast enough to be on time. That, and I'm bbqin ribs and burnt ends. Gotta babysit that.
I have the pry bar screw drivers they are nice my medium one I already have a curve to it
Was everything ok with Matco M he seemed a bit down today?
Flag is backwards
Woohoo!!
👍🏼
Will this tool work on Asian truck and car let me know thanks
Yes it has an entire list of cars it will work on. It’s really impressive the coverage this kit Will do
Have y’all seen the new blue ratchet?
Blue matco ratchet? I dnt think they make one yet or couldn't find it on the website just orange green red and pink only blue matco I've ever seen was in the thumbnail of one of the videos clay made about it requesting a blue one
I have the snapon Ball joint tool it is a big set I think I Paid $800
Buh we wanna see it in use not you hangimg out in your air conditioned truck
If you buy it you can. I be famed if i pay over $900 for it when i own the otc
How much let me know thanks
He covers the price in the video
@@KoonTrucking thanks bro
one of these times ill be first maybe lol
Wake up earlier on Saturday morning.😂
@@donaldhollums3278 lol what 5:30 am isnt early enough