This design, in my opinion, for the money, is the best tool out there for removing shells from moon clips Ranch Products and Wilson Combat make the exact same tool but for less money. RP $3.99 and WC at $4.99 at MidwayUSA. I just bought one of each to compare them...they are exactly the same in all dimensions. An interesting fact: Sierra's reloading manual lists loads specifically for revolvers in.45 Auto showing a 200-300 fps increase in velocity and a large increase in foot pounds of energy! The do warn though, those loads should never be used in any semi-auto pistol!!!
I have a 460 S&W and a 500 S&W. Do they make moon clip unloader tools for these cases? I would get them both equipped for moon clips if this tool was available.
Bro the .45 acp and .45 colt are low recoil ammo that is fun and accurate to shoot!!! The governor is solid as it gets!!!!! The 410 handgun defense loads recoil hard but is still a blast !!!!
That's the only moon clip tool that's worth a tripe. It's extremely tedious, but it doesn't fall apart while using it. I've had a few of the fancy types, bought the best one. $50 bucks, it barely lasted two boxes of ammo. Or I used a screwdriver inside the empty cartritand pulled.
@@live4wild968 I made a de mooning tool out of a small pipe..works awesome. Those moon loading tools...67 dollars...not for me. Just ordered 20 more clips for 43 total...don't want to reload on location.
Yeah I just picked up a Taurus 9mm revolver. I can’t get regular rounds to load , all I can get that pop easily into the moon clips are those shiny home defense loads with the orange plastic tips . It came with 6 moon clips so I guess it’s my nite stand pistol.
$7.34 for a two foot of 1/2 copper tubing at home depot. Cut into 4 6 inch pcs cut a notch just over 1/2 of end dia. And 1/8 inch deep. Great dwmooner. Cut the futter off a cheap can opener and remove the revit that keeps it from opening too much and you have a loader
+live4wild I've taken mine shooting once since I got it. .45 acp & .45colt are fun to pop out of it. 45 Colt Judge/Governor 220gr Maximum Expansion Ammo from Lehigh Defense may be the buzzer loads though!!!!
the $40.00 moon clip tool is worth it. im cheap but after bending clips so slightly and cut fingers, plus easy loading 16-clips in 3.5 min's i got one. had the one from brownells. made one too.
you can load and remove empty cases sooo easy,plus you can change arbor for any cal. or mm. you want. well made too. you load the clips that become speed loaders. with my Governor i started at7yds. now i'm hitting 16 oz. water bottles at 25yds. with .45acp ball ammo.i know it is not a High Standard .22 target pistol how ever this wheel gun is just plain fun.
This is a Great tool however its not available on Amazon can you help us find another vender? Thank you!
www.ranchproducts.com/ here is there web site
This design, in my opinion, for the money, is the best tool out there for removing shells from moon clips
Ranch Products and Wilson Combat make the exact same tool but for less money. RP $3.99 and WC at $4.99 at MidwayUSA. I just bought one of each to compare them...they are exactly the same in all dimensions.
An interesting fact: Sierra's reloading manual lists loads specifically for revolvers in.45 Auto showing a 200-300 fps increase in velocity and a large increase in foot pounds of energy! The do warn though, those loads should never be used in any semi-auto pistol!!!
Thanks for watching and the info
Can you tell me the inner and outer diameter of the 9mm
Will this tool work for 10mm?
Just picked up a Performance Center 625. I was wondering how I was going to handle that task. Simple is good. Thanks for the great video.
Kraals You will love the little unit. Just used it last weekend shooing the S&W Governor
I have a 460 S&W and a 500 S&W. Do they make moon clip unloader tools for these cases? I would get them both equipped for moon clips if this tool was available.
Need me moon clip for webley revolver 455 intique
I don't own a revolver but if. I did id say those look like a must have. Very cool
Thanks for watching.
Only if you have a revolver that uses moon clips. Only a few do.
Fricken SWEET! I just ordered one....Wow will this save my fingers!
Thanks
Sweet, Hope it helps
Very cool tool Colonel! Good info as always!
Thanks Colonel
Thank you ! just ordered one
Bro the .45 acp and .45 colt are low recoil ammo that is fun and accurate to shoot!!! The governor is solid as it gets!!!!! The 410 handgun defense loads recoil hard but is still a blast !!!!
How much
You should have watched the entire video!👌
So why the two round moon clips?!!
They fit flat in your pocket.
I appreciate the effort and the knowledge but you could cut out everything before the 2:00 minute mark and everything after the 3:30 minute mark.
I have never tried this or even speed loaders I need to get on it
Thanks Buddy
Thank you for sharing sir!
Also works to load them
That's the only moon clip tool that's worth a tripe. It's extremely tedious, but it doesn't fall apart while using it. I've had a few of the fancy types, bought the best one. $50 bucks, it barely lasted two boxes of ammo. Or I used a screwdriver inside the empty cartritand pulled.
A few years late, but thank you! Just made contact with them to order mine!✌️
Works well. Great price too.
You will need some of these tools. They make a number of moon clip tools
@@live4wild968 I made a de mooning tool out of a small pipe..works awesome. Those moon loading tools...67 dollars...not for me. Just ordered 20 more clips for 43 total...don't want to reload on location.
nice but how about a loading tool
Yeah I just picked up a Taurus 9mm revolver. I can’t get regular rounds to load , all I can get that pop easily into the moon clips are those shiny home defense loads with the orange plastic tips . It came with 6 moon clips so I guess it’s my nite stand pistol.
cool tool!
Thanks Colonel
$7.34 for a two foot of 1/2 copper tubing at home depot. Cut into 4 6 inch pcs cut a notch just over 1/2 of end dia. And 1/8 inch deep. Great dwmooner. Cut the futter off a cheap can opener and remove the revit that keeps it from opening too much and you have a loader
And for only $7.50, you can get one already made!✌️
Love that tool
I’ve got one 👉🏻🤚🏻… and it works great.
Great tool bro ...thanks for sharing !!
Thanks my friend
My kind of tool simple and works!
I like the simple method. They make some pricey units also. Thanks Buck
thats kool never seen that before
Check out the new video on a Great tool for your Moon Clips. Thanks for watching.
Very cool tool
Thanks for watching. Simple tool
Thats one of those things that you dont think much about until you need one
Yes in deed, Thanks my friend.
Good info my friend, thanks!
Thanks for watching
Tool works great love mine thanks buddy !
You are welcome my friend.
Cool, thanks for sharing this.
You are welcome
cool, thanks for sharing!
Thanks for watching
Great video...Thanks...
Very cool, Thanks for the info
Thanks for watching
Nice tool
Thanks my friend
You are the master of my universe brohan!!! Just ordered one for this damn Govna!!! Now I shoot
Thanks for watching. Neat little tool. I shoot 45 acp all the time in the Governor
+live4wild I've taken mine shooting once since I got it. .45 acp & .45colt are fun to pop out of it. 45 Colt Judge/Governor 220gr Maximum Expansion Ammo from Lehigh Defense may be the buzzer loads though!!!!
My Governor is my favorite revolver. Thanks for the Info
The KISS principle is always best.
Any tool that makes the job easier is well worth $7.50. Nice.
Thanks my friend.
TMI - but
helpful. I will probably purchase one.
the $40.00 moon clip tool is worth it. im cheap but after bending clips so slightly and cut fingers, plus easy loading 16-clips in 3.5 min's i got one. had the one from brownells. made one too.
Thanks i will check it out.
you can load and remove empty cases sooo easy,plus you can change arbor for any cal. or mm. you want. well made too. you load the clips that become speed loaders. with my Governor i started at7yds. now i'm hitting 16 oz. water bottles at 25yds. with .45acp ball ammo.i know it is not a High Standard .22 target pistol how ever this wheel gun is just plain fun.
MegaBait56 Yes they are fun to shoot.
Tool works great love mine thanks buddy !
I like mine to buddy!