Great job thanks for sharing :) and would love to see some videos of you with your personal bows of choice and equipment that you put on them and why you chose those parts and pieces for what your doing specifically with that bow :) things you like and dis like about each thing :)
When you get your hands on the new Spot Hogg Boonie, I would love to hear your feedback. If possible, a head to head comparison of the current best vertical multiple pin sight options available I.E. Black gold dual trac. Thanks again, love what you're doing.
I said the same thing and copped some backlash for it because apparently it is more important to have a micro first axis than 2nd and 3rd and while Chris Perkins gave his perspective, IMO they still made a big mistake in not going all out. I am sure at some point they will address the 2nd and 3rd axis though, it is just a matter of time.
So how much you can, I know deepens on you face, cbe micro comes with 130 yards metal tapes that will shoot it with my set up.. do they go there with them?
Josh, can you please explain why I can shoot fixed pin sights lights out, but anytime I put a slider on I lose all my consistency. Even my anchor starts to feel fuzzy. Then I throw my fixed pin back on and all is good again. What am I doing wrong?
Fixed multi pins don't typically move your scope housing. Single pin sliders move your scope housing, so your anchor has to change slightly as you adjust your string to re-align your peep with your scope housing. This is what you're experiencing.
I just saw a penetration test with different weights arrows, if you really want to see where the weight starts making a difference you may want to set the one gallon water jugs at 40 yards or more, because the difference really manifests at lower speed. Not that I shoot at deer ( my primary target) at that distance, I prefer @30 yards, living on the east coast that is my reality. Thank you for great content.
They don’t yet have an updated bridgelock bracket. You’ll struggle to use it on the Title’s cutout for example until they get a new bracket that has the additional hole for the first axis dowel pin on the bar side.
Running it on mine and I have enough room to work it. It’s tight for sure but windage set middle I can still get enough from the scope rod. That is with an avx31 so your mileage may vary. One other thing of note I may have misheard or understood but the old front quick disconnect does not fit the new one. The dovetail is smaller in the xp vs the pro.
@@Dziuky08 With the AVX the guy I shoot with had, it looked like it would be close to the head of the windage bolt, but he didn't ever give it a try. The long rear torque ring shade looked like it would hit, while the flat non-shaded ring my clear it, but I didn't spend enough time checking. I have a pre-order in with Lancaster since they put the 6" up on the site, no idea when I'll get my hands on one though. I assumed it was a new scope mount/disconnect block. Still haven't seen the part listed separate on Lancaster or Axcel's shop yet.
Here’s a weird comment: I miss the old the music for the intro to you videos 😂. Love the videos though. I’ve gotten so much out of your channel. Keep it up but bring the better (old track) back. The one where the lead guutar plays the same lick but an octave higher. It’s a better track. Just sayin
Stop the bus!!!!! Very confusing been waiting for this to come into stock to get one ordered. Axcel just announced it was coming but the same day also announced a new Mathews bracket. That tells me that you can’t bridge lock the sight without the new bar. If you want this to bridge lock you have to get it in side mount from a dealer and then purchase the bridge lock bar from axcel direct. Adds another $290 Canadian to the cost of the already most expensive site on the market. One of your guys in the shop said to bridge lock the side mount just add the windage bracket but I’m questioning if the old bracket will work with the new first access adjustment. If it did why the new bar. Very confusing. Have a title and wanted to put the best on it but getting to confusing and price is out of hand!!!!!!!
Dethrones them in sales? Don't know. Quality? Shibuya eats their breakfast all day. I want Axcel to reach Shibuya quality, they can do it, but to do it they've got to tighten up and simplify the design. Quality of machining and a new, simpler (better) design. Windage grub screws need addressing. Windage lead screw should be enclosed and they could combine it with a quick release mechanism. Three-spoke riser wheel gets caught on everything. Quick release elevation is rough and clunky feeling. Not enough threaded windage adjustment holes on the scope mounting block, and generally just a terrible microscope aesthetic.
@@johnnewcomb5162 I prefer the CPX pro since the scope mount is integrated and longer. Plus the adjustments for left or right windage is significantly better due to there are 3 screw hole positions, if your scope mount runs out of room.
Thank you MFJJ very informative video looking forward to the 24 brake down on sites
God's Blessings
Great job thanks for sharing :) and would love to see some videos of you with your personal bows of choice and equipment that you put on them and why you chose those parts and pieces for what your doing specifically with that bow :) things you like and dis like about each thing :)
When you get your hands on the new Spot Hogg Boonie, I would love to hear your feedback. If possible, a head to head comparison of the current best vertical multiple pin sight options available I.E. Black gold dual trac. Thanks again, love what you're doing.
please do a review on the new bowfinger v2 sight. I'm torn between this sight and the bowfinger sight.
Already up here in Canada, got coffee in my hands. Lets do this!
I am doing my 1st NFAA Tournament in Redding this year, senior, Bowhunter Freestyle. What would be the hot sight setup for this class?
I wish they had done micro adjustment for 2nd and 3rd axis as well
I said the same thing and copped some backlash for it because apparently it is more important to have a micro first axis than 2nd and 3rd and while Chris Perkins gave his perspective, IMO they still made a big mistake in not going all out. I am sure at some point they will address the 2nd and 3rd axis though, it is just a matter of time.
Any plans to review the Bowfinger sight?
Cool to see a video on the Bowfinger 1 V2 sight
So how much you can, I know deepens on you face, cbe micro comes with 130 yards metal tapes that will shoot it with my set up.. do they go there with them?
Do you know when these are coming in?
Josh, can you please explain why I can shoot fixed pin sights lights out, but anytime I put a slider on I lose all my consistency. Even my anchor starts to feel fuzzy. Then I throw my fixed pin back on and all is good again. What am I doing wrong?
Play with peep height
Fixed multi pins don't typically move your scope housing. Single pin sliders move your scope housing, so your anchor has to change slightly as you adjust your string to re-align your peep with your scope housing. This is what you're experiencing.
Hello, I would like you to make 20'' replacement rods for the Bee Stinger Counter Slide Stabilizers. Thank you.
This looks a little better than my Hogg Father ebay rip off I'm waiting for.. 😅🏹
What’s your favourite sites
I just saw a penetration test with different weights arrows, if you really want to see where the weight starts making a difference you may want to set the one gallon water jugs at 40 yards or more, because the difference really manifests at lower speed. Not that I shoot at deer ( my primary target) at that distance, I prefer @30 yards, living on the east coast that is my reality. Thank you for great content.
They don’t yet have an updated bridgelock bracket. You’ll struggle to use it on the Title’s cutout for example until they get a new bracket that has the additional hole for the first axis dowel pin on the bar side.
Running it on mine and I have enough room to work it. It’s tight for sure but windage set middle I can still get enough from the scope rod. That is with an avx31 so your mileage may vary. One other thing of note I may have misheard or understood but the old front quick disconnect does not fit the new one. The dovetail is smaller in the xp vs the pro.
@@Dziuky08 With the AVX the guy I shoot with had, it looked like it would be close to the head of the windage bolt, but he didn't ever give it a try. The long rear torque ring shade looked like it would hit, while the flat non-shaded ring my clear it, but I didn't spend enough time checking. I have a pre-order in with Lancaster since they put the 6" up on the site, no idea when I'll get my hands on one though.
I assumed it was a new scope mount/disconnect block. Still haven't seen the part listed separate on Lancaster or Axcel's shop yet.
Bowfinger 1 V2 please
Here’s a weird comment: I miss the old the music for the intro to you videos 😂. Love the videos though. I’ve gotten so much out of your channel. Keep it up but bring the better (old track) back. The one where the lead guutar plays the same lick but an octave higher. It’s a better track. Just sayin
noice
Stop the bus!!!!! Very confusing been waiting for this to come into stock to get one ordered. Axcel just announced it was coming but the same day also announced a new Mathews bracket. That tells me that you can’t bridge lock the sight without the new bar. If you want this to bridge lock you have to get it in side mount from a dealer and then purchase the bridge lock bar from axcel direct. Adds another $290 Canadian to the cost of the already most expensive site on the market. One of your guys in the shop said to bridge lock the side mount just add the windage bracket but I’m questioning if the old bracket will work with the new first access adjustment. If it did why the new bar. Very confusing. Have a title and wanted to put the best on it but getting to confusing and price is out of hand!!!!!!!
Dethrones them in sales? Don't know. Quality? Shibuya eats their breakfast all day. I want Axcel to reach Shibuya quality, they can do it, but to do it they've got to tighten up and simplify the design. Quality of machining and a new, simpler (better) design. Windage grub screws need addressing. Windage lead screw should be enclosed and they could combine it with a quick release mechanism. Three-spoke riser wheel gets caught on everything. Quick release elevation is rough and clunky feeling. Not enough threaded windage adjustment holes on the scope mounting block, and generally just a terrible microscope aesthetic.
Which model do you like best?
@@johnnewcomb5162 I prefer the CPX pro since the scope mount is integrated and longer. Plus the adjustments for left or right windage is significantly better due to there are 3 screw hole positions, if your scope mount runs out of room.
At @300 fps is a different ballgame
Not level… 7:35