Thanks so so immensely my friend for sharing your excellent + informative + and easy/clear/concise instructions w/absolutely zero bullshit mixed in !!!!! I used a copper mesh screen that I ordered from China. It was a 3 X 3 inch square of 88 copper mesh woven - cost literally $.99. I had a lead anode I'd bought online for $7. And I used a huge glass square bread baking pan. I used 98% sulfuric acid. I also noticed that on the bubbles side is the negative side. When YOU pay attention to your power supply, you easily can glance seeing the draw of the gold refining cell doing its work as the needle nearly bottoms out while pulling gold into solution. It peaks right back to your original amperage once the process has successfully stripped off all (or the primary lion's share of the vast bulk of it at very least) long story short - I hugely appreciate this my friend #!! I've now got an outstanding gold refining cell of my very own that I've already acrewed multiple ounces of both silver as well as gold
Your incredibly talented knowledgeable with all your videos. You inspire me to continue scrap it’s not only the fact of making money it’s the science behind it.
Love the video, if you keep a spray bottle nearby you can just spray off gold slimes before you transfer the already de-plated pins into the waste bin , just so all your gold sludge is in one place, just a minor note , but you'd be surprised how nice it is to do not have the slimes spread out.
I KNOW THIS IS AN OLD POST BUT...................What if there were impurities in your batch before de-electroplating such as fake gold, plastic or anything along those lines? would that ruin the batch or would the sulfuric acid just eat it away. Please answer........Anyone with knowledge
Dušan zelo zanimivo poskusil sem že skoraj vse najbolj mi všeć čista. Sol voda + - Dušan povej nam kje razlika elektro z kislinami ali navadna sol in voda..... Nata na čin še nisem zasledil pri tebi ????????
Tanks for teaching about the power supply now I’m using that but I would like you to try with salt and water and you can tell me if works well or not thank you my friend
Noup!Finger and pcb plated boards go in Ap solution ,that is the best vay.This dosnt work to good on that kind of materijal.If you have big glod plated surface on board,that is fine and it will work,but if not big,like fingers,beter is AP.
Great video! May I make a suggestion, Maybe run smaller batches of pins to maybe allow a full reaction? Also got a ? Is there another solution I can use besides sulpheric acid? I just really do not like the idea of using sulpheric acid... Maybe I can use Salt water? or another type of acid like nitric or hcl?
Sulfur is the best, but you can try wit vinegar and salt, as in one of my first videos. Smaller quantities are always better because of the contact between the pins and the mesh.You can not use Nitric or Hcl for electrolysis because they will both eat the mesh. Maybe Nitric culd would be used if the Aluminum mesh and the pot were used because Aluminum is resistant to Nitric, but I have not tried it yet, now this idea has been sinful when I answered you, I'll have to try it.
Dusan when ur gonna make a gold recovery electroplating video with ammonium chloride and citric acid water as electrolyte instead of sulfuric acid, thanks!!!
Dusane, ajd malo pomozi. Kada ovako isfiltriram kao ti...sto ostane u filteru vidim ti spalis i dobijes zlato ???? jel moguce tako ili se jos nekom kiselinom obradjuje ?? hvala. lp
Mozes i direktno da ga topis kada ga isfiltriras iz Sumporne kiselina ali dobices najvise 10-14 karata zlato zbog necistoca koje otpadaju sa pinova i olova koje se trosi vremenom. Najbolje je da ga posle filtriranja rafiniras sa Carskom vodom ili Hlorovodonicnom i izbeljivacem,posle ga oboris sa Smb ili Vinobranom i dobijas 22-24 karata.
I wonder, if a stainless sieve will work like the copper mash. I guess, the sulfuric acid will not dissolve stainless. Did or can you try this? And for starters: One drop H2SO4 sulfuric acid in your eye and it is gone forever, no help! Allways wear sealed glasses when you are working with sulfuric!!!
I think is stainles be ok ,maybe it less work like conductor,but they shod do the yob. An yes,sulfaric acid is very dangerous,gloves,siled glases an respiratory is requred .
Thanks so so immensely my friend for sharing your excellent + informative + and easy/clear/concise instructions w/absolutely zero bullshit mixed in !!!!!
I used a copper mesh screen that I ordered from China. It was a 3 X 3 inch square of 88 copper mesh woven - cost literally $.99. I had a lead anode I'd bought online for $7. And I used a huge glass square bread baking pan. I used 98% sulfuric acid. I also noticed that on the bubbles side is the negative side. When YOU pay attention to your power supply, you easily can glance seeing the draw of the gold refining cell doing its work as the needle nearly bottoms out while pulling gold into solution. It peaks right back to your original amperage once the process has successfully stripped off all (or the primary lion's share of the vast bulk of it at very least) long story short - I hugely appreciate this my friend #!! I've now got an outstanding gold refining cell of my very own that I've already acrewed multiple ounces of both silver as well as gold
Loved this video!! This is one of the procedures I'm studying probably the most right now!!
Have a GREAT Day!!!
Your incredibly talented knowledgeable with all your videos. You inspire me to continue scrap it’s not only the fact of making money it’s the science behind it.
Yes,gold recovery is a very interesting hobby that can also bring good money.
Thanx mate :)
Love the video, if you keep a spray bottle nearby you can just spray off gold slimes before you transfer the already de-plated pins into the waste bin , just so all your gold sludge is in one place, just a minor note , but you'd be surprised how nice it is to do not have the slimes spread out.
Fine work!
I relly like your videos a lot..
I KNOW THIS IS AN OLD POST BUT...................What if there were
impurities in your batch before de-electroplating such as fake gold,
plastic or anything along those lines? would that ruin the batch or
would the sulfuric acid just eat it away. Please answer........Anyone
with knowledge
Dušan zelo zanimivo poskusil sem že skoraj vse najbolj mi všeć čista. Sol voda + - Dušan povej nam kje razlika elektro z kislinami ali navadna sol in voda..... Nata na čin še nisem zasledil pri tebi ????????
Agua regia is mixing copper, brass& gold, how to collect gold please reply
Tanks for teaching about the power supply now I’m using that but I would like you to try with salt and water and you can tell me if works well or not thank you my friend
thank you for the amazing videos!!!!!
michael jones thank you for watching time freind.
hello doussan this process is valid for pins magnetis and no magnetics thaks you for andswers
For both :D
Thanks for looking friend :)
999 Dusan Gold recovery thanks you mi friend
If that bucket slides you're screwed
Thank you for your find work
Interesting, I was not aware you can recover gold using electroplating
Is the material filter stainless and the opposite is the one to the left of the filter, is it the copper plate of Master Dussan?
can i use this method to remove the gold plating from my 925 silver jewelry? i wanna restore them to thier original silver color..
scusate, ma per avere più reso di oro è meglio il procedimento in elettrolisi oppure gli acidi . grazie a chi mi risponde
Acids are easier for beginners because of skill and experience, or lack thereof.
Hi great educational video. Can u use this process for finger boards ??
Noup!Finger and pcb plated boards go in Ap solution ,that is the best vay.This dosnt work to good on that kind of materijal.If you have big glod plated surface on board,that is fine and it will work,but if not big,like fingers,beter is AP.
Can we do this process inside the room is there any coming out poisonous gases?
Great video! May I make a suggestion, Maybe run smaller batches of pins to maybe allow a full reaction? Also got a ? Is there another solution I can use besides sulpheric acid? I just really do not like the idea of using sulpheric acid... Maybe I can use Salt water? or another type of acid like nitric or hcl?
Sulfur is the best, but you can try wit vinegar and salt, as in one of my first videos. Smaller quantities are always better because of the contact between the pins and the mesh.You can not use Nitric or Hcl for electrolysis because they will both eat the mesh. Maybe Nitric culd would be used if the Aluminum mesh and the pot were used because Aluminum is resistant to Nitric, but I have not tried it yet, now this idea has been sinful when I answered you, I'll have to try it.
Awesome! thank you I will try first with vinegar and salt first It is nice to know that aluminum is resistant to Nitric.
Hello friend. In the market I can not found HCl 96%. Mostly it has about concentrate of 32 % only. Can it work or do you have another option for it?
doesnt the brass get disolved ?
could you used salt water .
Dusan, what if the pins are GOLD plated Brass?
Hi did you try electrolytic with salt and water????
good video
Thanx mate :)
You using 12v only?
I want sodium metabisulfute, where is available...
Loews
Home depot
Bon.nide stump out
Dusan when ur gonna make a gold recovery electroplating video with ammonium chloride and citric acid water as electrolyte instead of sulfuric acid, thanks!!!
I record most of my videos directly while I'm processing things. I'll try as soon as I can mate :)
٨
Dusane, ajd malo pomozi. Kada ovako isfiltriram kao ti...sto ostane u filteru vidim ti spalis i dobijes zlato ???? jel moguce tako ili se jos nekom kiselinom obradjuje ?? hvala. lp
Mozes i direktno da ga topis kada ga isfiltriras iz Sumporne kiselina ali dobices najvise 10-14 karata zlato zbog necistoca koje otpadaju sa pinova i olova koje se trosi vremenom.
Najbolje je da ga posle filtriranja rafiniras sa Carskom vodom ili Hlorovodonicnom i izbeljivacem,posle ga oboris sa Smb ili Vinobranom i dobijas 22-24 karata.
Instead of brass mess, I use a fine stainless steel tea flake dipper. No base metal goes into solution.
Dishwashing gloves and short sleeves aren't "very careful".
Really interesting video though. So much better than using 3 L of nitric to dissolve out the base metals
Hi,Curry.
I wonder, if a stainless sieve will work like the copper mash. I guess, the sulfuric acid will not dissolve stainless. Did or can you try this?
And for starters: One drop H2SO4 sulfuric acid in your eye and it is gone forever, no help! Allways wear sealed glasses when you are working with sulfuric!!!
I think is stainles be ok ,maybe it less work like conductor,but they shod do the yob.
An yes,sulfaric acid is very dangerous,gloves,siled glases an respiratory is requred .