How to Wire Your G-Body For Dakota Digital Gauges

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • In this video, we start wiring our shop car(86 Monte Carlo) for a Dakota Digital gauge cluster

ความคิดเห็น • 13

  • @michaelmutphy9077
    @michaelmutphy9077 ปีที่แล้ว

    Might want to change that rear seal on the transmission.

  • @johnd0ugh
    @johnd0ugh ปีที่แล้ว

    what was the original gauges on this ca?r because im dealing with the gauges with idiot lights and not the actual gauges

  • @Yellaboimike
    @Yellaboimike 4 ปีที่แล้ว

    At 2:30 it look like you put the pink wire in the negative did it work? I have a 1987 Monte Carlo I can’t get my fuel sending unit working what else you have to hook up if you remember?

    • @DixieRestorationDepot
      @DixieRestorationDepot  4 ปีที่แล้ว

      It does look that way but I just went out to the shop car and it is in the terminal marked FUEL SND, when first installed the gas gauge gave us some trouble as well. I made sure the ground under the vehicle was cleaned and it has worked well ever since. You can give me a call if you have any other questions 877-243-4943 and my name is Rob.

  • @towcars5550
    @towcars5550 2 ปีที่แล้ว

    do i also have to order the GPS speed sensor

  • @blackstar5947
    @blackstar5947 3 ปีที่แล้ว

    Could you tell me which wire are which for the ones we reuse

  • @nickmclay
    @nickmclay 5 ปีที่แล้ว

    What did you mean when you said you re used the wire? You had the proper color wire and it was a lot longer than what was there from the factory. Where did you get that wire?

    • @DixieRestorationDepot
      @DixieRestorationDepot  5 ปีที่แล้ว +3

      We have the benefit of having parts cars and GM wiring harnesses kicking around. From the factory they definitely do not provide enough wiring. If you have the time shoot us an Email at Info@dixierestorationdepot.com or give us a call and I will cut up a harness for you if you need some GM color-coded wires and send it your way.

  • @steveellis5537
    @steveellis5537 5 ปีที่แล้ว

    Which color wires do I snip the ones on the Hornets the installed into the box

    • @DixieRestorationDepot
      @DixieRestorationDepot  5 ปีที่แล้ว +1

      The wires that get reused are the fuel sender, blinkers, volts, brake warning lights, and high beams. Feel free to give us a call and I give you more details. 877-243-4943 Rob