Ultimate Enduro Racing Mini Bike Build | TrailMaster Hurricane 200X + Tillotson 225cc Swap!
ฝัง
- เผยแพร่เมื่อ 25 ก.ย. 2024
- We head down to Go Power Sports world headquarters in Dallas, Texas in preparation for the 2nd annual GPS 180 3 hour mini bike endurance race! We build a brand new racing mini bike for the race in today's episode, starting with a TrailMaster Hurricane 200x mini bike. This full suspension mini bike is very similar to the TrailMaster MB200, except the Hurricane 200x comes with a front disc brake and more aggressive tires compared to the MB200. We take this TrailMaster Hurricane 200x to the next level by upgrading the front and rear suspension, installing a Tillotson 225cc racing engine, and more!
Thanks for Watching!
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
TrailMaster Hurricane 200x: bit.ly/3RXVctE
Premium front end: not yet available, stay tuned for info!
Billet rear shocks: bit.ly/3f4yIIT
Tillotson 225cc performance engine: bit.ly/34fqvtJ
Tires: call for availability!
Super pipe: bit.ly/3uplQk0
Fuel tank: bit.ly/2ZGo2oK
Aluminum side guards: bit.ly/3EjPXyQ
Juggaverter: bit.ly/3ahxWlD
60t sprocket: bit.ly/3EuF5ya
Chain guide block- weld to swing arm: bit.ly/3VfARBv
24 flat slide: bit.ly/2NbWOnp
Fire 265 cam: bit.ly/3kdqTze
Side cover stud kit: bit.ly/3UTOE0U
Head stud kit: bit.ly/3hYqLXi
Mm 212 handlebars: bit.ly/3goLumF
40” throttle cable with bend: bit.ly/3tLZYQP
Throttle assembly: bit.ly/3TRxpMd
Champion rockers: bit.ly/3V8p5cg
Fuel line 3/16 non hardening: bit.ly/32iAlNe
Peg kit: bit.ly/3CMfmyl
Go Power Sports: bit.ly/3QKyODE
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Ike's face after that engine kiss🤣🤣🤣
I was about to say the same thing!
His face was sooooo funny😂😂😂
That boy ain't right
i cant stop laughing 🤣😂
@@theworstgamervr whatcha talking about you don't whisper sweet words to you engine to give you the sweet power lol
Bringing Charles onto the channel full time was the best decision you ever made for carsandcameras
Mullet Chuck is my new favorite character
I got a mullet to btw
I had me a mullet but ma hated it too much she won the argument
I had to get my mullet cut off for school
@@redneck_cowboy7826 I cut mine off in 1995. Haven’t had it since thank God lol
That SCAM guy is not giving up. Can't believe how many replies he's made to comments. Love you Guys 🛵🧔💝💝💝
Pro tip: it’s a lot less dangerous to weld near a topped up gas tank than near an empty one (presuming there has been gas in the tank before). If you need to weld the tank itself fill it up as much as possible with water to push any residual gas vapour out
Yeah you can do that or do you have another engine sitting around on a go cart or a minibike or something you can take an exhaust hose metal and run it from the exhaust over into the fuel tank let it run for a few minutes and then weld on it while it’s sitting there running and putting the exhaust in the tank and then you can weld it up I watch the welder on a job site when I was a mechanic on heavy equipment he welded up a cracked fuel tank on a scraper with just the exhaust from my welder off of my truck blowing into the fuel tank with rag stuff around the hole craziest thing I’ve ever seen thing I ever seen in my life. The fuel it was coming out of the crack was catching on fire but that was it and never went no farther than that Anywhoo true story!
Its funner if you leave vapors in it lol
@@brucewayne9300 it’s actually much better if you use a diesel for the exhaust. If the gas engine happens to backfire-it will be a bad day!
Or argon.
@@ronniewilliz153 Yeah, because healing burns are such a hoot.
Whoever is doing your editing is absolutely KILLING IT, production team doesn't get much props in the industry, just wanted to let you guys know you're doing a great job!
I belive John is the production crew and editor besides a cameraman.
@@highnoonsmallenginerepair yep, that final scene where he recaps the video, he's literally sitting there editing the episode, and he does that selfie bit, and then adds it right before he clicks "render"
The "too bad this is my engine building hand" blazing saddles reference caught me off guard🤣🤣
Thank you for the custom made dragster! My money went to a good thing (helping Charles)! Time spent here is time well spent.
I am watching this from 3000+ miles away and it's worth it just for Ike's hard w t f stare! ! If I win the lottery iam coming to take part in one of these events but for now watching the fun is a grate inspiration to get in my garage and build something!👍🇬🇧
@Text on Telegram @Carsand_Cameras smells like a scam
We love go power sports because they allow y’all to be Kids and aswell be professional when need to be. Love it and keep up the great work!
The blazing saddles joke, sure do love Charles' sense of humor
I know this comment if off-topic to the video today but curious to know how the replacement of Charles' tools is going. Love you guys.
😮😢
I died with the look ike had ok his face when Charles kissed the engine lmao 😂😂 I literally watched tht one part three times 🤣🤣
Boy Howdy Charles is a great character. But engine building professor C. is where it's at..So says Oregon
Best build ever, now that's what Im talking about. I neeeeed one of those.
Ike & Charles did a great job, I think Charles absolutely %100 has to rock the mullet hair all the time and talk about 3wheelers !!! He's not old enough but he's almost got that down to the T...
Mullet Charles is my hero 💪🏼
Ike and Charles are the best frenemies at their craft they bring the fun in this channel!
Name a better trio, I'll wait.
You guys should do a build-off. Each of you builds a cart to run the Grand Prix. The fastest person driving their own design wins. You guys should agree on an engine size, and you should get them to weigh roughly the same with driver. The driver decides what gear, how to build the engine, and chassis mods.
awesome video and I have to say them Hurricane 200 that Go Power Sport sells look so sweet only wish I could afford to grab one for myself
Today we learned that Charles can literally build an engine in his sleep.
These engines aren’t really rocket science bud they are about as simple as it gets
@@johngarlick7115 your mom ever tell you if you don't have anything nice to say then don't say anything?
@@DoAnxiety naw just told me to be honest which my comment was nothing mean about it, and I’m pretty sure your momma told you that to reduce the amount of stupid coming out of you.
Now you can tell me your mommies advice it would be more fitting. 👍
@@DoAnxiety Misery loves company.
He is a great addition to the channel
This channel is going the way of so many other channels. Throwing money at or using other people's money doesn't make good content.
Most of your viewers are creative or on a budget. More and more even when you get creative you slap on a bunch of new stuff.
We know what money can do, show us what hard work and determination can accomplish.
Nothing stands still fella .
Things evolve .
Faster
Better
More reliable etc.
Only losers stay still
yeah i really second this all these new bikes / tillotson builds are getting rather old, and we already know they can make good stuff! show us how to jimmy a harley motor into a rascal, jam a snowmobile engine into a dirtbike or smt. Creative stuff tends to be way more interesting lol
Remember back when they used to actually make stuff and not be a GPS ad channel?
@@peterherrington3300 Only morons would have trouble understanding my post. Congrats you are it.
That tank bolt was probably right because the rubber bushing for the front mounts would move the tank back a bit.
When Charles was first hired on, and I knew nothing about him, I thought maybe he was just a helper or apprentice.
Not true. Turns out he's like a frickin Carol Shelby!
I almost fell off my chair when I saw the Ike's face, when Charles rocked the head and carb like a baby in his arms:-)
This face was so damn cool to whatch... like:" dude, are you serious?!"
Looking forward to the race footage! As Always, May God Bless you and yours! 😇
This is so cool! I want this bike!! Work with Build Break Repeat is awesome!! 👍👍👍 let’s gooooooo!
Awesome bike fellas. I wouldn't mind one myself. I really don't like those mud guards. Can you get up graded guards similar to a dirt bike style. I think the trailmasters would look so much better.
Love the video. Keep up the great work. I like your hair “Mullet Chuck” 😂. Always great builds and entertainment.
You could have made custom plates to weld on each side of the frame to tie all the tubes together where you did the reinforcement. That plasma cutter would come in handy for that
Go Power sports left you in the shop.... you'd be like kids in a sweet shop :)
Hotter then Johns trailer 😂
I've ridden plenty of small dirt bikes with manual clutches far steeper than those slopes. The only thing about those trails that could have thrown you is the large rocks in the trail.
p sure ike was talkin bout a centrifugal clutch otherwise i agree
Great job guys looking forward to the race next week.
Man I’ve been telling u guys about the dang flat slide carb for forever finally y’all got one on a build
10:49 agreed dude. Also, why does the thing sounds like my Chinese 70cc 😂
You have access to so many great toys over there. Here in Australia, we don't have anywhere near the amount of bikes or buggys. And if you find em, they're mega expensive.
This Old Man always enjoying your videos 🥰. Really looking forward to next Monday and the race 👍. This Old Man loves you guys. 🛵🧔💝💝💝
Arby's Beef n' Cheddar, Curly Fries with Three Pepper sauce for dipping, and a Jamocha Shake! !
Be sure to gear it really low, too! A top speed of like 40 will take full advantage of all your power for a given minibike track.
@Text on Telegram @Carsand_Cameras lol look at you scamming folks
Adding to Christmas list
He’s gotta wear the mullet every episode now 😂
Is there any plan for Go Power Sports to manufacture a street legal conversion for these bikes? It seems like a logical next step, and a guaranteed big seller.
I doubt these will ever be street legal as a kit. The engine is big enough to put them in the motorcycle class of vehicles, requiring insurance, registration, licensing, etc. Plus, as low as they sit, with as many oblivious idiots on the road as there are, would YOU want to be out there?
One of these with a clutch would be fun
You know Charles needs his sleep when he can't even get his signature one-liners out... :P
You’ve done to a minibike what I’ve wanted to do for the last 10 years great job guys I’m glad somebody finally did what I wanted :-)
It's fun to watch this, having been in the race. Those hills are so much steeper than they look in the video.
The Short Bus? More like the War Rig! Fixing the engine WHILE it's driving down the road 🤣
Way to go guys I'm sure yall will do great
Charles " y'all got any three wheelers?" 🤣
Thx for your time and energy
Charles is a good addition to cars an cameras he stills the show he's knowledgeable in everything good guy to have around a go getter
Guys -constructive criticism and project idea here
you've made some damn good progress with your channel and quality of vid's and I understand you've got your sponser Go power sports which is awesome but everything has became a bit samey at least thats how it feels to me (i heard the harley build is coming which is awesome)
It's like an overdoes of karts , minibikes and fitting with go power sports parts and a stange top - princess car - coffin etc I personally prefered your more technical building stuff like the BMW powered buggy - the honda motorcycle etc where your doing a bit more problem solving fabricating on the fly and where you do more interesting stuff that not just slap parts x on bike or kart x
I have a crazy Idea which you may like or hate - take a AWD car with indepentant suppension and CV axles pull the motor gearbox and diff and drop in 4 small motors (keep your sponser happy) with torque converters and hook them to the cv axles via sprokets (getting a spline fit maybe hell so maybe just weld a tube over the spline and put 2 bearing blocks and a sproket on that) then send it or better still take it racing in autograss
4 times 225cc is 900cc which should be plenty of power to move a car as long as the torque convertors are geared right and handle the stress I know thats a hell of a project but maybe give you that creative spark? something to really sink your teeth into maybe turn it into a mini series
also ALWAYS let charles channel his inner charles!
Can't please everyone man. This is the first video I've watched by these guys, and it's because of this particular bike. 💁
Great job yinz guys keep up the great work and I will keep on watching
No sleep Charles reminds me of Brad Pitt in fight club.
Charles needed a siesta!
2 days faster than anticipated good job John. I had a lot of fun racing this year hopping to go again next year. Chris from the tent next door lmao
Excellent choice on Charles doing the welding as much as Ike likes to think he's the master at every thing and trys so hard to sound extra intelligent, but we all know that Charles is the much better welder compared to his pigeon shit that he does and I think when it comes to bikes Charles is just as good I'm not being a hater on ike I thinks he's a top merchanic on everything he knows so much about everything iv learnt a lot
im pretty sure the first go cart i had was a dark green manco dingo 6hp from walmart about 25 years ago! it was supposed to be a 6.5hp subaru engine, but they sold us a 6hp model.
If you need to remove permanent marker quickly and safely, use Auqanet hair spray.
So true! How’d you know this?
Bike looks like a whole lotta fun to ride👍🙂
With the swingarm at that angle you're going to have problems with the chain unless you have a spring tensioner
What would be the cost of the original bike versus the cost of the upgraded bike?
The race was awesome I went and saw red beard garage, build break repeat, bayou margarita, and many more teams
Today we also learned that charles sounds like boomhauer when he lacks sleep
10:41 Ike in the background 😂
13:15 Uncle Rico’s Camaro 😂
I love it. Guys are having a hell of a trip good for you😂
Man I hope you guys win this year, last was so close.
Lol nice dig from Ike about the Trailer, sucks it was stolen
Thumbnail looks awesome !!!
Keeping your butt off the seat will save your low back later in life, especially in rough spots. Been there done that. It started the total destruction of my low back. For the rest of my life. Living in pain all day every day tries to suck the fun out of everything. It could have been prevented.
Gotta love a fully sponsored build
Ily your videos i hope to be like you guys one day
You think I'm dumb
Yep Charles needs a mullet lmao
Hi y’all from west Alabama
I like Cars and Cameras.
You guy should have a three way mini bike build off. Each build a bike “under a set budget” and complete in a series of challenges.
Hey Charles, Eyek is an extreme case!😝
I'd love to make one of those w/ a QS 273 3.5t hub motor and 96v battery and a 250-300 amp Kelly controller.... It looks like an awesome bike. Great job guys... Keep up the great work. 😊👍
Just ordered a Hurricane. The next 2 weeks of delivery are going to be slow motion!
Makes me nostalgic for my friends fat cat back in the day it was cool as hell in Florida sugar Sand!
i love this and cant wait to early retire to do the same=been hoarding some of the rarest race toys to relive my chilfhood.84Atc250r/85cr500r and aquired a 1970 aqualoop with a 40 hp outboard motor. CRAZY CANADIAN FAN here liked and subscribed
Nice camera work and editing John. Looks like a great trip so far (including the unmentioned bus break downs). looking forward to seeing more, especially the "Harly"
Back to the dragster!!!
Nice upside down forks guys!
Out with the New, in with the New New!!!!
Hey good luck with the race guys I hope you win good show good luck!
'Oooh bus,the scrappy bus'...Not quite the way the song goes,but I think,"Scrappy Bus" fits.It's tough enough to keep going,and breaking enough to be a tiny bit crappy.The bike build looked awesome.Hiya Joe;good to see you.Have a safe and fun Thanksgiving weekend everyone!
L.O.L. 10:42 the look on ikes face
"y'all got any 3-wheelers?"
Great way to "proof" a new triple clamp design...race the crap out of it. We will be at the race next year.
Love tapped guys like you. That Hurricane came out l boss
Pretty damn cool guys what a great build. That’s one beefy little minibike. Can’t wait to see the race. Great video and keep up the great work guys.👍🏼🤩💪🏼😎
Need a fork upgrade for my baja warrior! Let's see that prototype come to fruition!
I officially need to purchase a short bus to travel in
on my mb 200 I split the pipe running from the suspension forks to the engine mount clean in half and had to plug weld a pipe to the inside, they build em like tanks
@Telegram me@Carsand_Cameras so what does that mean?
Ahhh I can’t wait for that race
I have a gx200 and I've broken 3 re ground cam shafts in less then a year. The only cam I've been able to use without breaking it in half is one without a compression release. Unfortunately, the pull start is now useless. I carry a cordless drill wherever I go that I use as a starter. My little gx200 is making 27hp at 10,000rpm.
awesome episode and i love the old stuff but it was good 2c the boys working on something new. So new theyre prototypes,
Awesome video and even cooler bike. It sure turned in to a hurricane. Great to see you guys. And looking forward to next year