Thanks Gary, always great to run through the settings on the Master. Gets a bit neglected using the Remote all the time. Love the new Engwe by the way 😁👍 Glen, South Australia.
Liking this program, found me a hammered farthing first time out on a very quiet field. Tried it following day on a footpath I’d done before and two George and a Vicky copper. Will be my go to in future.
Returned again for an hour to the same area already done with stock program, four further coins, including George III and Vicky silver. This program is awesome ❤
Always interesting! I would like to see a video where you show what different discrimination actually do to the detector. Minus xx or plus10 or plus42 as in tekkna. 🇸🇪🙏🍺
Cheers Gary, problem is I already have two other custom Sensitive Full Tones (base prog 3) programs and I think I can only program one at a time on the WS6 master. I would probably use all three in a day which works fine with the controller unit because I can use the same base program for all the custom slots. It would be great if an update allowed the WS6 to use more than one custom for each base program.
@@The-skillschool Another one; the high tone of the Full Tones is too high for me. Is there a way of lowering the highest tone ? If not maybe an update could allow the last tone break to determine the highest tone? 👍
Good video as always but my problem is I wear 2 hearing aids and all your videos are for someone who hears well is there any chance you can do a video to help people like me like maybe turn the sound round so iron becomes high tone good stuff low tone or have a word with Xp and see what they come up with thanks Keith
i Hope XP comes out with a updated Mi4/MI6 with Magnetic on/off switch so i don't have to push the button twice on every target :) XP is always on the cutting edge so i hope they catch this! since other manufactures have this
My English is not very good, I have a ws6 module, I made most of the internal settings in the same way, I used the distinction yesterday as 42 21 today, I think 42 is more successful
Hi Gary, I used this program today on Stubble and found every swing was dominated by the signals reflecting the stalks being passed through by the coil. Reduced sensitivity to 90 with no effect. New newbie so forgive my ignorance, any tips would be appreciated
Gary I think this is the first video I watched of using this Ws6 programming a program start to finish. Thanks for sharing.
Thanks DDS 🤝
Thank you Gary, I collected a lot of lead mines in four coins
Thank you 👍
Awesome video as always Gary. Already put this setting into my deus 2, with great results, Roman and copper coins, big thanks for the program mate..
You are welcome Steve
Had a go with it yesterday and I liked it, the good signals really jump out, I'll be using again cheers 👍👍
Great thanks for your feedback
Thanks Gary, always great to run through the settings on the Master. Gets a bit neglected using the Remote all the time. Love the new Engwe by the way 😁👍 Glen, South Australia.
Cheers Glen, yes the Engwe is a great asset to my detecting.
Fantastic program tried on Saturday dug 24 good targets and about 10 scrap many thanks.
You are very welcome 🤝
Hi i tried your program yesterday. I only gone and banged out a silver denarius thanks for the great work you do
That's fantastic Leigh, thanks for giving it a try 👍
Liking this program, found me a hammered farthing first time out on a very quiet field. Tried it following day on a footpath I’d done before and two George and a Vicky copper. Will be my go to in future.
Great feedback Chris, well done sir.
Returned again for an hour to the same area already done with stock program, four further coins, including George III and Vicky silver. This program is awesome ❤
@chrissoar8000 Brilliant, well done 🤝
Thank you Gary!!
I love this program!😊😉
Great thank you 🤝
Always interesting!
I would like to see a video where you show what different discrimination actually do to the detector.
Minus xx or plus10 or plus42 as in tekkna.
🇸🇪🙏🍺
Interesting idea my friend, thanks for your thoughts.
Hi Gary do you have a video on setting the tekkna program on the main deus 2 main square remote. Many thanks
Yes on my channel last week John
Bonjour les sous titres de la vidéo ne fonctionne pas ? Merci 👍
Thanks please try again now
Thanks
You are welcome sir
Cheers Gary, problem is I already have two other custom Sensitive Full Tones (base prog 3) programs and I think I can only program one at a time on the WS6 master. I would probably use all three in a day which works fine with the controller unit because I can use the same base program for all the custom slots. It would be great if an update allowed the WS6 to use more than one custom for each base program.
Thanks for your thoughts
@@The-skillschool Another one; the high tone of the Full Tones is too high for me. Is there a way of lowering the highest tone ? If not maybe an update could allow the last tone break to determine the highest tone? 👍
Thank you Gary....
Cheers Vince
Awesome, thank you
You are welcome 👍
Good video as always but my problem is I wear 2 hearing aids and all your videos are for someone who hears well is there any chance you can do a video to help people like me like maybe turn the sound round so iron becomes high tone good stuff low tone or have a word with Xp and see what they come up with thanks Keith
Hi Keith
Thats a good idea, I will look into it thanks for your thoughts.
Cheers Gary 👍
You are welcome Brian 👍
i Hope XP comes out with a updated Mi4/MI6 with Magnetic on/off switch so i don't have to push the button twice on every target :) XP is always on the cutting edge so i hope they catch this! since other manufactures have this
Thanks for your thoughts
👍🏻Thanks Gary
Cheers Jon
Thanks tried it for first time and found some George coins if other detectors are around you what is the best button to take out static with ws6?
Noise cancelling hold the top right.
All in the manual 👍
My English is not very good, I have a ws6 module, I made most of the internal settings in the same way, I used the distinction yesterday as 42 21 today, I think 42 is more successful
Thank you for your thoughts
@Garry I'm looking forward to the Europe Bicycle Tour! make it happen!
Good luck Stefan 👍
Is there any benefit of using square tones with these settings over using pwm or is it just personal preference?
Square tones is easier on the ears, but I don't think it gives any more performance.
@@The-skillschoolthanks Gary, I'll give pwm a go with this program. 👍
Thanks mate 👍
You are welcome buddy 👍
hi, i'm using v0,7, it will work correctly with this version? or i need to update? thanks
Try it
Treshold on ws6 how many?
Does it say in the manual
@@The-skillschool i bought it used, havent manual
will it keep orginal program as well?
You need to save it
Likes bro 👊👍
Thanks bro
Discrimination 42😳??? pourquoi si haut ?
Try it 👍
Hi Gary, I used this program today on Stubble and found every swing was dominated by the signals reflecting the stalks being passed through by the coil.
Reduced sensitivity to 90 with no effect.
New newbie so forgive my ignorance, any tips would be appreciated
Sounds like a ground balance issue.
Make sure you don't pump it or use tracking.
@The-skillschool thanks Gary. I thought you do pump the coil to GB. GB was at 86/87
Thanks Gary...
You are welcome🤝