Brilliant video buddy. Also Brilliant English too. I bought an a4 allroad 2 weeks ago. Soon as I got it the car would shake on power sooooo it needs a flywheel!! It's been in the garage for nearly 2 weeks getting done haha.
I did one of these a couple of years ago. The top starter bolt can be removed without dropping the DPF. It's a bit fiddly, very long extension, UJ connected to the socket and lower the gearbox a little for access. And good eyesight!!
My 2014 Audi A6Black Edition Ultra 2TDI Clutch pedal got stuck and gearbox started leaking suddenly and it's in a garage now to get clutch and flywheel replacement! I wonder how long a Flywheel usually last?
Well done you guys I have one in the garage at the moment and the steering rack bolts are seized sold my boss says the box will come out without dropping the steering rack but I don’t think so I will show him your video 👍
@@gavmcp11GT that’s spooky same car back in the workshop today for a timing belt and water pump. Regarding the seized in steering rack bolts tried getting the box past the rack er no chance in the end we just went for it used a three quarter drive breaker bar which didn’t have any flex in it unlike an half inch bar anyway they came out but I have to say it was a bit worrying at the time. Let me know how you get on👍
@@gavmcp11GT your right about using some heat it will help greatly. Other garages I’ve worked for in the past have had oxyacetylene gear it’s a must have really current garage boss tells me his insurance forbids the use of it so we don’t have it. I’ve taken it upon myself to purchase some map gas canisters and a torch the same as plumbers use while not as hot or versatile as the oxyacetylene set up I’m quite pleased with it.
good job man 😁 i have done a new clutch Sachs set,becouse the old clutc was slipping. Now i have a problem with starting the car... always say press clutch to start the car... i have to press it real hard, more that is normal to start the car. I have changed slave cilinder and master cylinder. do you have any idea what could be the reason? thanks for helping bro 💪
Hi , do you have the Number of the clutch pieces because i have to change mine also but it’s very intrusting the black disc has no spring around and it’s cause a little bit difficulty to search the good one , so if you remember the clutch name and the number of the pieces that gonne help me a lot. Thanks.
Hey brother i hope you reply to me I got gearbox malfuntion message on my 2012 S5 and mechanic told me is the clutch i just want make sure is the clutch before spend 4k u.s on parts and labor please let me know thanks.
Hi my clutch was just replaced with a new LUK when the pedal is pressed slightly it makes a rattling sound when the pedal is pressed fully the sound goes away any ideas what this might be many thanks.
My buddy has this car. He just purchased a 2016 and asked me to take it for a drive and check out the gear box. Me driving the car, i could not get the car in 2nd gear many many times and had to jump into 3rd. What could be the problem?
hi mate was it automatic car or manual i got my car the same automatic but it struggles to drive up hill and when it goes it spins someone said that it could be the clutch by the way what do u think is wrong with it thanks
Tristan if you have time see these video on start da video you can see revs going up and after Stoke for few seconds and go again ✌ th-cam.com/video/0aZyLXwY7Lk/w-d-xo.html
Hi is very difficult access but you will be able to turn the crank from the bottom with ratchet tool but you not gonna have much space there.i did that on this way
Brilliant video buddy. Also Brilliant English too. I bought an a4 allroad 2 weeks ago. Soon as I got it the car would shake on power sooooo it needs a flywheel!! It's been in the garage for nearly 2 weeks getting done haha.
Thank you for this video about to start clutch and flywheel on my A4 its 1deg outside this video will make it a lot easier
I did one of these a couple of years ago. The top starter bolt can be removed without dropping the DPF. It's a bit fiddly, very long extension, UJ connected to the socket and lower the gearbox a little for access. And good eyesight!!
I done it 4 years ago with out talking the DPF too.
you removed it from the top of the car or under the car
Well done iam in the middle of doing my clutch on my a4 quattro.. watching your video has given me a few ideas on how to remove things
Thank you for your help made my job so much easier 🙂..have a good day
My 2014 Audi A6Black Edition Ultra 2TDI Clutch pedal got stuck and gearbox started leaking suddenly and it's in a garage now to get clutch and flywheel replacement! I wonder how long a Flywheel usually last?
Well done you guys I have one in the garage at the moment and the steering rack bolts are seized sold my boss says the box will come out without dropping the steering rack but I don’t think so I will show him your video 👍
How did you get on? Both of mine are ceased so I’m debating taking it out with the rack in situ
@@gavmcp11GT that’s spooky same car back in the workshop today for a timing belt and water pump. Regarding the seized in steering rack bolts tried getting the box past the rack er no chance in the end we just went for it used a three quarter drive breaker bar which didn’t have any flex in it unlike an half inch bar anyway they came out but I have to say it was a bit worrying at the time. Let me know how you get on👍
@@kevinpalmer7452 ya joking I gather we are needing a ton of heat on them! It’s a rubbish set up
@@gavmcp11GT your right about using some heat it will help greatly. Other garages I’ve worked for in the past have had oxyacetylene gear it’s a must have really current garage boss tells me his insurance forbids the use of it so we don’t have it. I’ve taken it upon myself to purchase some map gas canisters and a torch the same as plumbers use while not as hot or versatile as the oxyacetylene set up I’m quite pleased with it.
@@kevinpalmer7452 just snapped a rack bolt 😬 looks like the subframe is coming off now
good job man 😁 i have done a new clutch Sachs set,becouse the old clutc was slipping. Now i have a problem with starting the car... always say press clutch to start the car... i have to press it real hard, more that is normal to start the car. I have changed slave cilinder and master cylinder. do you have any idea what could be the reason? thanks for helping bro 💪
Tausend Dank für dieses Video!👌
Hi , do
you have the Number of the clutch pieces because i have to change mine also but it’s very intrusting the black disc has no spring around and it’s cause a little bit difficulty to search the good one , so if you remember the clutch name and the number of the pieces that gonne help me a lot. Thanks.
Very nice video Hugo good to see and top explain how to change the clutch
Thanks so much for watching
@@HugoCalisto hello where about you guys are from because I have Audi a5 of I ever need work my car
@@ahmadsayedgol4186 hi we are from Boston Lincolnshire
You are lucky with your brother its mecanic ❤
tanks man it was great jop
Must you change the flywheel when you change the clutch kit... Please answer... Thank you
That is the best tink to do is do all in one's
Great job guys. İt is also very helpfull.
Hey brother i hope you reply to me
I got gearbox malfuntion message on my 2012 S5 and mechanic told me is the clutch i just want make sure is the clutch before spend 4k u.s on parts and labor please let me know thanks.
Hi bro you need to see when you driving 40mph press gas full down if the Rpm going up and down like losing power.. if yes you have a sleeping clutch .
Hi my clutch was just replaced with a new LUK when the pedal is pressed slightly it makes a rattling sound when the pedal is pressed fully the sound goes away any ideas what this might be many thanks.
Hi wen you change have you you change all set flywheel. Clutch disc. Pressure plate. And. release bearing
@@HugoCalisto It was a solid flywheel so that wasn't changed the kit came with pressure plate, disc and release bearing.
@@jerryrawlings8885 okay I will ask my brother what he thinks about and I will let you know
Did you use the clutch with the correct springs rated for a solid flywheel? if they mismatch you will get chatter but the vehicle will run fine.
@@adivarso8175 Thanks.
Is good idea to check bearings in gearbox from 2008 to 2010 they have problems
Yap I'm Lake my is 2012...2013 if you want can you subscribe 😉pls
Is need to romove the starter injone or no? Thanks
Hi yes you have to remove the starter motor..
My buddy has this car. He just purchased a 2016 and asked me to take it for a drive and check out the gear box. Me driving the car, i could not get the car in 2nd gear many many times and had to jump into 3rd. What could be the problem?
Hi probably is the gear box transmission issue ..or the gearbox selector mechanism
Very good. Well done. Far out of my abilities
Good work team Saturday I have to change it for my car thx
Thanks is a big job you will appreciate after is than
Can you subscribe please will help tha channel
Nice video man , very useful refresh
hello, do you have a video when you changed the clutch plate and the pressure plate?
Excellent video with detailed info
Spot on mate good job
Do we have to bleed the clutch system after replacement
Well I didn't have to
No, you don't since the cylinder has been dismantled just from the gearbox without touching its own oil line supply.
Thanks Hugo my husband will be doing on my car Thanks xxx I subscribe to
Thank you for the video,it's so helpful
Thanks for your video it helps allot
How many kilometers are there in the car when the hood is replaced
Hi it was 65000 miles
What is mark flywheel good ?
Sachs flywheel kit
@@HugoCalisto tankyou
Great video! Did you come across any complications during the install?
Did you watch the video the whole thing was a headache 🤣
Hi bro, thanks for that video.
how long is this job.thanks
Hi it takes 10h job
10h work 💪
i have the same car is yours a DSG auto ?
Hi no my is manual
Good video!
If is 2.0tdi is only 3 bolts if is 3.0tdi is 6 , remember chang gearbox bolts you can use them 2 Times after that bin
Yes is 3 bolts but I did think they were missing but not I have just make te tha first time 😂
I couldn't see you put the plate from which the camshaft position sensor picks the signal
hi mate was it automatic car or manual i got my car the same automatic but it struggles to drive up hill and when it goes it spins someone said that it could be the clutch by the way what do u think is wrong with it thanks
Hi Tristan my is manual ..if your revs going up and dawn when you press on a gas than yes can be the clutch
Tristan if you have time see these video on start da video you can see revs going up and after Stoke for few seconds and go again ✌
th-cam.com/video/0aZyLXwY7Lk/w-d-xo.html
Great job and I will flow you
Thank you
Hi how did you manually turn the engine there’s no room to access the crank
Hi is very difficult access but you will be able to turn the crank from the bottom with ratchet tool but you not gonna have much space there.i did that on this way
Good job guys
3 are mising...its good😂❤❤❤
How much does a flywheel replacement cost to do bro really curious to know 🤔
Hi my flywheel cost £480 to £530 if you done your self if not £680 to800
Great video guys thanks 👍
😉 well done 👏
Thanks
Bravo
Good job.
Wow well-done 👏
TOP JOB
Just took mine to garage to be done
Damn that's cool
is this manual or auto ?? nice ;)
Manual 8)
@@HugoCalisto a ok ;)
super
great video (Y) song name tho?
io un problema mi sa he sie boato il tendi ci ghia dal la cinghia dea alternatore del audi a6 dal 2003
chi mi po ajutarea.aiutare come si cambia
Nice 👍
Thanks so much for watching
You ready don't have too remove dpf you can get around
good jobs gays
thankyou
The background music is annoying 🙄
Please don’t take offence but the background music is very distracting.
Hi todo bem olha me la quanto custa pra fazer esse service change clutch
Se fores tu a fazer fica mais barato mais ou menos 600£ mas se fores fazer uma garagem pode ir ate as 900£ ou 1200 depende do sitio
@@HugoCalisto obrigado all the best take care I’m from Leicester abraço
Cuanto cuesta el cambio de un embrague de un Audi a4 di 140 cv del año 2008.
Ola el cambio cuesta en uk 🇬🇧 se fores tou a fazer mas o minos 550£
You made yhst supa hard
isso tá a arranhar por todos os cantos
Get rid of music mate
Aidez-moi s'il vous plaît