this might not have a great deal of views, but just know most of us who did watch are genuinely enjoying and appreciating the content i can confidently say
Nice job! Some stand up gas scooters that have suspensions are a straight swing arm swap! All you'll have to do is run throttle and brake cable.. but you will have a small diameter rear wheel, still works well. Also swap rear spring with mountain bike shock. Great job looks legit!
really hyped to see this build! I sketched, and physically mocked up something similar but never followed through. really nice to see it actually completed & running
Awesome engineering , like this because most think of this kind of bike for biking .you have opened a whole new way of motoring up a different kind of bike .maybe a patent part for them . Everything worked out so well .exhaust is a favorite ,in a perfect place .!!
Kool set up! You can go about 18 to 20 degrees on your carb angle. Mine is at 20 degrees and all I hade to do was lower the floor just a little bit. I hope it screams and has a smooth ride!👍
I been running my bike 2 yrs no filter down many gravel roads the bar of the frame stops anything. I may have a few specs on the lip but still going strong
Great Job!! I've been wanting to do similar for a long time but no more garage/workshop or 240V outlet for my welder. (Or physical energy) Even a generic mtn bike suspension is WAY better than a hardtail when you're hitting bumps in the road at 35mph.
Alright! I was looking at my full sus bikes around, and my new gas bike trying to figure out what to do about it. This has thing beats my ass where I often find myself would rather stand up or float on my feet a bit cause I'm often off road. So hitting rocks bigger than road grade is just Muuurder when you're don't see it coming or you're whipping along in medium and higher RPM and they sneak attack you. Got big ol' fat tires on it with downhill rims, spokes and Axel's that built years ago, which help, but it's a limited solution. This'll push me in the right direction . This is awesome.
I can’t believe how much snow you all have laying around still. Have you figured how fast it will be? I know you can’t do that at the moment! What a build!! I love it❤. My friend and I have finally got the tribute bike done and would love to show you some pictures of it if possible 😊 don’t slide 🛝 and save that hide…..
Damn I wish I was that lucky when things are close like with the chain and carb. With me it all would have hit and have to be re rigged/engineered. You got a hill climber.
Our parts bikes collection looks almost identical... I even have a MAGNA like yours. I got it for the rims and disc brakes. I have a full suspension frame project going like yours but mine is a trike. Made my own rear axle set up using trampoline frame tubing and a roller with bearings from a treadmill...
It's surprising how good the cheap full sus bikes are because I had one for a short period of time as people were saying it was fucked but it just needed a bit of love and I pretty much road it till the frame gave up
i've pondered cutting one bike frame in half so the rear tire section to the seatpost bar on the frame and the pedal crank , so anyway the pedal crank hole (where the pedals mount on the frame, crank removed, bearing /bushing inserted there ) mounts where the back wheel goes then the bike is stretched because it has the rear section of one frame mounted through the pedal crank hole to where the rear tire usually is the shock could mount from the seat post pole to higher up behind the seat on the frame more horizontal than vertical ....
Stretched frame and add a gas motor on a bike with a suspension. With a 21 speed tranny. Better get heavy duty wheels. The spokes will not take it very long. Honestly, you could use a motorcycle frame, and add the small engine and a hydraulic system to power the rear wheel. Tip: large volume hydraulic pump motor to a low volume hydraulic motor. ( 10 gpm to .5 Gpm) @ 900 p.s.i. or you can crank that up too to10,000.p.s.i.!❤❤❤ You just got a high speed/ high torque croch rocket!😮😮😮
If I could only dump pictures 📸 I re-imagined that same bike by cutting the frame and flipping the front section and making it only inches from the ground.
Great job! It's amazing how well it's maiden voyage went. I really like your tank mount. I've had so many issues with my tanks shifting on the top tube it's ridiculous.
Hello! I think you made a mistake: The rear suspension spring should not be in the center of the frame, but just in front of the rear wheel! The rear fork should immediately be pivotable and suspended, not in the center of the frame!
a simpler solution for mounting fueltanks for me was using thick Galvanized Metal Perforated Plumbers Tape with some nuts since the tape is flexible and strurdy
That's an epic build, is that frame steel or aluminium, I wish I could weld like that lol. I wonder how long it will last on trails, you should also give your fork some love, also, ever had a rim fail on you, do you check for wear and replace?
Tenho um projeto desse no meu canal . Depois de muito tempo procurando achei algo parecido; motor de bike na parte traseira da bike. Ficou muito bom , o meu não está tão bom assim mas vou dar uma melhorada. Gostei ficou ótimo.
You did a really good thing here low center of gravity and nice longer wheelbase the lights to be very stable pretty much this guy needs to go design Ferraris
hi i someone else put on a relatively new autolite 216 spark plug, is that good enough for awhile? 50cc engine, heavy cheap mt bike, im going to be riding about 3 days a week averaging 10 miles, with small to medium some hills
I'm pretty sure your going to have a meltdown when you lean on it hard for a long period, the fins on the jug are not going to get proper airflow at the angle you mounted the motor.
Something that I see which is not good is that the way you are building this the engine snd extra frame steel became additional unsprung weight. Unsprung weight is bad.
this might not have a great deal of views, but just know most of us who did watch are genuinely enjoying and appreciating the content i can confidently say
I was told you cant put a motor on a rear shock bike. This guy, "hold my beer". Nice job😂🍻
Very impressive. That rear swing arm is genius.
Bro you should monitize that Swing arm concept. it's great, and unique. I can almost garantee someone would pay a huge amount for this idea.
Mr. Kim here that is a wild looking bike you must have a great imagination well I hope to see another one of your videos
This is a great build. I bet it will do awesome off road.
I feel like the seat and handle bars moved back would look better, but...GREAT job.
Awesome build thinking outside of the box hell yeah ride safe brother
Nice job!
Some stand up gas scooters that have suspensions are a straight swing arm swap!
All you'll have to do is run throttle and brake cable.. but you will have a small diameter rear wheel,
still works well. Also swap rear spring with mountain bike shock.
Great job looks legit!
really hyped to see this build! I sketched, and physically mocked up something similar but never followed through. really nice to see it actually completed & running
Cool tour of your quaint town.. and the bike is great too.
Inspiring. I ran straight to the garage after I saw the video 😂
Great imagination, very resourceful. Best build ive seen yet.
can't wait to see it go down the road. what a crazy build👍
i like it,good job dude.
i have to say man , genius !!!!! love the build
honesty she looks like a beast
Very good job, really fun to see you custom build this bike. Wow🔧❤️💪
This thing will be interesting!!! Nice man. I love a monster build.
Sick work 💯 on that full suspension mountain bike aka full suspension motorized bicycle
This thing is cursed and beatiful at the same time
Awesome engineering , like this because most think of this kind of bike for biking .you have opened a whole new way of motoring up a different kind of bike .maybe a patent part for them . Everything worked out so well .exhaust is a favorite ,in a perfect place .!!
Kool set up! You can go about 18 to 20 degrees on your carb angle. Mine is at 20 degrees and all I hade to do was lower the floor just a little bit. I hope it screams and has a smooth ride!👍
I been running my bike 2 yrs no filter down many gravel roads the bar of the frame stops anything. I may have a few specs on the lip but still going strong
Man this build is too rad👍🏼
That’s awesome , I’ve always wanted rear suspension.
Great Job!! I've been wanting to do similar for a long time but no more garage/workshop or 240V outlet for my welder. (Or physical energy) Even a generic mtn bike suspension is WAY better than a hardtail when you're hitting bumps in the road at 35mph.
Nice ride!
So the bike around 23:43 of the video, are you building an engine automatic drive system? CVT to duel sprocket jackshaft. What engine did you use?
awesome build
Alright!
I was looking at my full sus bikes around, and my new gas bike trying to figure out what to do about it.
This has thing beats my ass where I often find myself would rather stand up or float on my feet a bit cause I'm often off road. So hitting rocks bigger than road grade is just Muuurder when you're don't see it coming or you're whipping along in medium and higher RPM and they sneak attack you. Got big ol' fat tires on it with downhill rims, spokes and Axel's that built years ago, which help, but it's a limited solution.
This'll push me in the right direction . This is awesome.
Great video man.I have to try this.
I can’t believe how much snow you all have laying around still. Have you figured how fast it will be? I know you can’t do that at the moment! What a build!! I love it❤. My friend and I have finally got the tribute bike done and would love to show you some pictures of it if possible 😊 don’t slide 🛝 and save that hide…..
Nicely done. Looks like your back wheel is trying to catch up to u as you drive by.lol. Lots of luck. Thanks for sharing
Damn I wish I was that lucky when things are close like with the chain and carb. With me it all would have hit and have to be re rigged/engineered. You got a hill climber.
Our parts bikes collection looks almost identical... I even have a MAGNA like yours. I got it for the rims and disc brakes. I have a full suspension frame project going like yours but mine is a trike. Made my own rear axle set up using trampoline frame tubing and a roller with bearings from a treadmill...
Hello sir can you build for me a bike frame like this? What is the price
It's surprising how good the cheap full sus bikes are because I had one for a short period of time as people were saying it was fucked but it just needed a bit of love and I pretty much road it till the frame gave up
pretty cool brother .
Did you upgrade the spring to keep from bottoming out so easily now since it’s a much longer lever?
Haha....excellent job bud! I wanna see some performance vids with the custom suspension.
Very nice bro,I will build that too and copy what you did for the smooth running,thanks for sharing bro,from Philippines
Nice done!!!
Making a long story short those suspension frames are perfect for an electric bike build .
LOVE this build!
Im building one like this . Great idea very innovative
i've pondered cutting one bike frame in half so the rear tire section to the seatpost bar on the frame and the pedal crank , so anyway the pedal crank hole (where the pedals mount on the frame, crank removed, bearing /bushing inserted there ) mounts where the back wheel goes then the bike is stretched because it has the rear section of one frame mounted through the pedal crank hole to where the rear tire usually is the shock could mount from the seat post pole to higher up behind the seat on the frame more horizontal than vertical ....
I haven't seen your channel for ages h it's good and interesting to see what you're up to now days
Dude that is crafty buddy I love it that's my next move and thank you
If that was my bike, I would drive it like I stole it. Plus you’re in the snow let the power bands kick in slide around make it fun for us to watch
Stretched frame and add a gas motor on a bike with a suspension.
With a 21 speed tranny.
Better get heavy duty wheels. The spokes will not take it very long.
Honestly, you could use a motorcycle frame, and add the small engine and a hydraulic system to power the rear wheel.
Tip: large volume hydraulic pump motor to a low volume hydraulic motor.
( 10 gpm to .5 Gpm) @ 900 p.s.i. or you can crank that up too to10,000.p.s.i.!❤❤❤
You just got a high speed/ high torque croch rocket!😮😮😮
If I could only dump pictures 📸 I re-imagined that same bike by cutting the frame and flipping the front section and making it only inches from the ground.
Excellent job
Great job! It's amazing how well it's maiden voyage went. I really like your tank mount. I've had so many issues with my tanks shifting on the top tube it's ridiculous.
Absolutely awesome 👍
THis is pretty cool. nice job, how much extra weight did it feal like it added?
Hello!
I think you made a mistake: The rear suspension spring should not be in the center of the frame, but just in front of the rear wheel!
The rear fork should immediately be pivotable and suspended, not in the center of the frame!
Very nice! A jem really.
What welding process did you use, flux core, stick?
Looks like a drag bike, Genius.
I almost bought your bike off marketplace when you had this thing for sale up there.
a simpler solution for mounting fueltanks for me was using thick Galvanized Metal Perforated Plumbers Tape with some nuts since the tape is flexible and strurdy
That's an epic build, is that frame steel or aluminium, I wish I could weld like that lol. I wonder how long it will last on trails, you should also give your fork some love, also, ever had a rim fail on you, do you check for wear and replace?
great build now that is a true build a custom build at that.
very smart design, i did something similar before, can i send u pictures of mine somehow
Take out the shock and shock bracket in the middle and place it on the rear
Continúe Say hello ,Jorge.
Tenho um projeto desse no meu canal . Depois de muito tempo procurando achei algo parecido; motor de bike na parte traseira da bike. Ficou muito bom , o meu não está tão bom assim mas vou dar uma melhorada. Gostei ficou ótimo.
How much would you charge to put an engine on a full suspension bike if I sent it to you ?
You did a really good thing here low center of gravity and nice longer wheelbase the lights to be very stable pretty much this guy needs to go design Ferraris
hi i someone else put on a relatively new autolite 216 spark plug, is that good enough for awhile? 50cc engine, heavy cheap mt bike, im going to be riding about 3 days a week averaging 10 miles, with small to medium some hills
Where are you located I am in NB Canada!
awesome build man , im sure you'll come up with more interesting projects in the future
Saddened to see the upside down backwards solution wasn't implemented.
Make some sides that fit the bike frame and turn that empty space into a cooler stealth fuel tank..
Yo that's amazing
great idea
SUPER STOKED new found talent now you're going to have to surpass it
Put a piece of pantyhose over carb to keep dust out ,tightened with a zip tie
you man awesome. All fits
25:ish I'm thinking when u get the rest flex the chains gna hit the engine dnt kn let's watch and see.msybe not cuz the whole system moves together
Hell yea bad ass bro👍👍
Please, please, bring this to a bike manufacturer so that it can be mass produced. This frame makes all other frames obsolete for motorized bicycles
Jet your carburetor according to your altitude, it will run way better.
10:33 I would worry under load, the shock would damage the spark plug.
Not trying to be a “TH-cam critic” but you should try to get a Tig welder and practice. The flux core must go !
Other than that it’s awesome 😎
Maybe 2 shock / springs
Move the shock add a bar for the motor
Very interesting.
Shote lets see Mr pulsar already suscribe.
Are you a professional welder
That's looks like a hill climber. Cool as heck bud.
I'm pretty sure your going to have a meltdown when you lean on it hard for a long period, the fins on the jug are not going to get proper airflow at the angle you mounted the motor.
Awesome
I love that I'm not the only person who threw on a 20" wheel on a larger bike for more torque 😅
MAYBE also slide the thing in the back of a SUV~
That’s basically a dirtbike
Great job but Those welds though
40:1 cradle to grave
Why is that? Wouldn't more oil, except the plugs, make it last longer?
I run 32 to 1
Something that I see which is not good is that the way you are building this the engine snd extra frame steel became additional unsprung weight. Unsprung weight is bad.
👍✔️
Nice