ฝัง
- เผยแพร่เมื่อ 12 ม.ค. 2020
- Order from: zapwizard.com/collections/sur...
A customer requested product. Thumb tabs for the Leatherman Surge. Made from nylon, and professionally 3D printed.
How to remove super-glued thumb tabs:
• Removing Super Glued T... - แนวปฏิบัติและการใช้ชีวิต
Great, now I’m going to have to consider a new sheath for my Surge! ;)
Nice video
Love your ideas! Do you have any for leatherman K2&K4 series? I would love to buy them. Thanks
Some of my mods fit those as the implements use the same profiles, I have the compatibility listed on each product page. Edit: Sorry, your asking about the thumb tabs, then the answer is no as I don't own the K2 or K4.
Hey there Joshua I was wondering if these thumb tabs and the cases you make for the multi tools are made of the same material isn't there some kind of products that we can use to seal the rod nylon from getting warped or ruined because of moisture like some kind of clear coat like a flat clear coat or some kind of Automotive coating that we can apply to them like I love your products absolutely like I do plan on ordering some when I get back home from work as I work away from my family quite a distance but I was just wondering seeing how the type of material that is used to make your products and you were mentioning on another video I think about the nylon can warp if it gets wet and you don't take care of it I was just like I said wondering is there a possibility that there could be some kind of coating that we can buy off the shelf to seal it in thanks for your time bud keep up the good work
@@ZapWizard dude your awesome thanks buddy !!!!!!!
This is a great idea but this will have a hard time selling at $50 per holster. A Leatherman branded nylon sheath is $15 or under.
Cool!
do you happen to have any for the leatherman signal? Id buy in a heartbeat!
I have the signal, but haven’t started on any product designs yet.
Interesting? You have SURGE on a table and use screwdriwer to open acetone can :)
Wow I love everything about this how many extra saw blades can fit in the side of the sheath I may have to get one of thess
It holds just one blade. With the intent of holding the saw/file when you otherwise have the saw/file already in your tool.
@@ZapWizard oh man is there any way u can make one that will fit 2 blades I was thinking have the file in the tool then have a hacksaw and a wood saw in the sheath
@@thegardenguy9160 Because it has a sort of spring retaining clip, it wouldn't work with two blades inside. I might be able to mirror the blade holder to the other side, where the bit extender grip is, replacing that feature with a 2nd blade holder.
@@ZapWizard but I want everything lol I guess I'll just have to do with the 1 extra blade because I want to keep the extender but again really good job on the sheath
You should do a pip boy update
Hey love the thumb studs but as much as I get that you want some compensation for designing that piece I wish that you would also put out the stl so we could print them out at home... Shapeways is nice for metal printed parts but the rest is just too expensive for what it is! Guess I have to create something similar for my surge... Anyway really nice job!
I have seen folks make similar tabs from wrapping thread, sugru, or plumbers putty.
@@ZapWizard yup could work but I think I'll go the 3d route to add some color and I think I will look nicer... But thanks for the info and reply!
So can you send the surge for the latest mods and sheath mods with you& how long will it take tl complete?
Sorry I don’t offer this type of service. The surges holster isn’t a mod, it is just an accessory. The thumb tabs attach with just a dab of super glue, and don’t require any modification to the tool.
Is there a way to do this sheathe with a horizontal carry?
I don't have a specific horizontal carry version because of the heavier weight of the Surge. However, I do have a version that is compatible with TekLok clips. With those you can make it 45 degree or horizontal carry, but they add some bulk. www.shapeways.com/product/SP5PLHJNN/tek-lok-compatible-leatherman-tool-holster?optionId=95209827
Freaking excellent idea bro!
Can super glue work on my black Surge?
It believe it should. The blackening profess is a chemical treatment. You man need to clean any oil in that area using alcohol.
the bomb
Unbelievable! In the UK, thumb studs like this cost about £18 each pair delivered - which is bloody ridiculous: I made up some T-section inserts which do the job perfectly, using sections from a Costa Coffee stirrer as the part that your thumb connects with, backed by short lengths of a thin bamboo round-section meat skewer which fits into the hole in the blade and is superglued to the underside of the stirrer part.
It’s a two-minute job - and costs precisely nothing. If you wanted to get arty, you could lightly sand the trailing edge of the stirrer part, leaving the leading edge ridge untouched. Because the bamboo fibres are pretty springy, it’s a good interference fit in the blade hole if you cut it to a suitable length, but you could use a drop of superglue if you were concerned it might fall out. Again, if you were concerned with appearances, you could paint the top of the stirrer with nail polish.
@@sihartgroves7549 I don’t control Shapeways pricing. I have a 10% markup. Do with that wha you will. These aren’t made on mass, and yes there are many DIY solutions such as string, zip ties, screws.
@@ZapWizard Sorry - I in no way wished to offend, and I’m *hugely* impressed with your technical skill. My point was only that it’s a great deal of money (which I understand is beyond your control) to do a simple job that can easily be accomplished with materials on hand.
Would these work with the dl30 clone?
I don’t know. I don’t have the clone.
Please tell where to buy the sheath ? Thanks
It is nice
I cannot fin the holster on your website...EDIT: I found it
Hi, Where can I get your holster?
The surge holster is here: www.shapeways.com/product/3BB54VQXT/holster-for-leatherman-surge-closed-loop?optionId=66281735&li=shops
hi can you send me adress for thumb tabs and case for leatherman surge and how to send payment thank you
@@ZapWizard Heard rumors of a ratchet, do you make one?
US Marine here could use one for my duty Surge
Semper Fi
Gunny
Wow. $15 for two? Cmon dude
Yup..changed my mind about the purchase once i realized
17 euros for 2 small plastic thump studs?
@@ZapWizard Why use Shapeways then? Theres Etsy too isnt there?
What's that sheath?
That is my own custom designed sheath. www.shapeways.com/product/3BB54VQXT/holster-for-leatherman-surge-closed-loop
I have had good experiences with sticking with epoxy for 24 hours.
I want to buy some of your stuff. Please let me know how to order them from you. Thanks
All my designs are available from Shapeways. They produce the parts either in New York or the Netherlands depending on shipping location. Link to the shop is here: www.shapeways.com/shops/zapwizard?section=Tools&s=0
I saw a chisel mod
I don’t know who made that mod.
Все хочу