I think the real reason Cris is leaving is because just a few short years ago Britney peed on hi at the Hammers. That's got to be a hard one to just get over and move on from lol. As always thank you for your time guys.
Sorry to see Chris go, but it is nice to see more of Brittany and Kevin! I had just accepted the loss of your personal excitement as a natural effect of the channel’s growing maturity. Just a wild thought here… it would be wonderful if Chris could have a companion show like big tire garage, that would do a weekly segment under the lite-brite banner.
Thanks you guys I really enjoy your content. I very rarely miss an episode. Thanks especially for the UTV content. I am a UTV owner. Keep it up. Brittany, you’re a cutie 😊
I like watching videos of you guys in the side by sides, but I’d personally never buy one. I’d just build a full sized that can do the same and more. But to each their own.
It's alot more than 35,000.. we just payed 44,000 for ours with the smart shocks. We absolutely love ours. There are certain areas that fit and finish isn't great but nothing like they are complaining about. My polaris had fit and finish issues as well. The car is amazing mabey they got a lemon I don't know.
It’s a shame the shop couldn’t do something about those ridiculous upper front A arms and spindles..no amount of suspension performance is worth how horrible they look. It just looks like Can Am was trying to look creative and completely missed the mark.
So that’s what proper geometry looks like..seems like there are hundreds of variations of a traditional double A arm designs that work perfectly without violating any patients or have poor upper arm geometry..lol That looks like the typical engineer that’s trying to reinvent the wheel with some ground breaking design ..I’m betting that spindle / upper arm configuration goes away along with the dipshit who dreamt it up. @@Kyle-fu6en
They’re not “trying to look creative”, it’s a functional design that has real world practicality. They track and handle like they’re on rails with zero body roll.
So I should expect to see all the trophy trucks at the Baja 1000 switching to this new and far superior design..lol..probably not because that shit would get destroyed by debris in the desert. @@downbytheriver501
@@downbytheriver501 I watched the UTV KOH this morning and all the CanAm guys that started loosing air pressure had to deal with their tires hitting that stupid arm/spindle configuration…a was only a matter of time before they trashed a tire. Such an unnecessarily over engineered design.
The welds on the RS1.5 are top notch. Honestly they can’t get much better using MIG. Most people don’t want to pay for TIG. Thanks for 👍 on the Maverick R!
![[TH] 2024 PMGC League | Survival Stage วันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/FVFT-PFwU80/mqdefault.jpg)
Chris needs his own shop. His skills are 💯
Chris is the only reason I kept watching this channel.
Luckily, there’s plenty of other fun TH-cam channels for you to watch! 😊❤️
That looks Sick! Baby Monster! Going to be a lot of fun this spring and summer. Nice to see y’all and talk at Winter Jam. LiteBriteNationCapsCanAm!
Seen RS1 been their shop multiple times Justin and Sonny real deal shout out from Havasu
Where is that cage sold? 🤩
Cage looks great! Looking forward to seeing it out on the trails again!
I think the real reason Cris is leaving is because just a few short years ago Britney peed on hi at the Hammers. That's got to be a hard one to just get over and move on from lol. As always thank you for your time guys.
I mean, if I had a choice. . . . . .
@@rcmike09 Stop that whizz friends are bad ummm K
you make it sound traumatic. 😆
where did they talk about chris in this video?
@@wraith511802003 in the first part
Brit, your new ride looks great. Now you can race Kevin in his. Kevin, great job with the cage on her new ride...
Love the cage ! The Mavrick R is going to be a blast out in the elements . Take care guys and catch you on your next video,
Sorry to see Chris go, but it is nice to see more of Brittany and Kevin!
I had just accepted the loss of your personal excitement as a natural effect of the channel’s growing maturity.
Just a wild thought here… it would be wonderful if Chris could have a companion show like big tire garage, that would do a weekly segment under the lite-brite banner.
or Chris could do some episodes and do some minor fixes here and there.
Very Cool and I think you have a great machine
Thanx for sharing your experience 👍
Have a Great Day 👍
Thanks you guys I really enjoy your content. I very rarely miss an episode. Thanks especially for the UTV content. I am a UTV owner. Keep it up.
Brittany, you’re a cutie 😊
sick rs1 n cage!!!!! didnt kno UT had palm trees.....Brit your top looks like mad max! LET ME KNOW BOUT THE HOUSE!
Hopefully Chris will have his own channel
I'm hoping the same thing
He’s moving to Salt Lake City to work on monster trucks if I heard right. He’s getting paid what he’s worth I hear.
I was watching an old video of West Coast Custom, a couple of weeks ago, if I'm not mistaken, I believed Chris once worked for them..
@@billocampo1365 yes he sure did.
Sad to see chris go 😢 i wish i lived closer. Id offer my services as a mechanic.
And we love the Pro R thank you guys it’s awesome 🤙
Glad you are enjoying it!
I'm surprised that the fuel tank is right in your lap. Good luck with this side by side. Happy Trails to you both.
Good morning guys !!!
Pity some toys have to go, but life is change it's self ❤
That cage came out great!
I love you guys and can’t wait to see what’s to come
Looks nice. Can't wait to see all the wheeling videos. Take care God Bless.
Living your best lives!
Yea Britney make sure Kevin's life insurance Policy is paid up. Anyway have fun and enjoy life.
Those are fun. They cost as much as a new Jeep though.
I know you guys said you're getting rid of some rigs, besides the Jeep, you guys HAVE to keep this one too. Lol
Great video thank you!
the video is quite sad without Chris
Its known that the mav R even with the smart shocks is not that good stock. But i guess some shock tuning and spring kit will fix it.
🤣🤣 that was wanna the best beginnings of your videos!! Love seeing sxs videos ❤️❤️💯🤙
Who's going to do your vehicle updates in future? 🤔
It must be cold, as Brittany has a full length shirt on.
Nice ending.... :-)
great job again.
ADS shocks next?
how much for the Braptor?
Awesome!
For the cost if these side by sides quality and safety should not need addressing !!!
cant wait
idk. cleetus mcfarland and travis pastrana seemed to do just fine driving it fast.
We didn’t say it wasn’t fast, just that the Pro R could be driven faster over whoops. The Maverick R corners better though.
Get some portals for the maverick, then you'll be able to get some bigass tires on there with that upper arm.
How much is a cage like this.
Selling all their stuff, Brittany has a Mad Max thing going on here, something is up... I better check the news.
What about the jimny you still have that.
Just saw you guys in Target. Haha
🤣🤙
How much for the Yamaha
When is it getting dropped off @Shock Therapy?!?!
Eleventh! Gotta drive one of these things someday.
Bro follows her around like a little puppy
Fast, cheap, reliable, you can only pick 2.
I have your pro r
Who needs a couch?
So the rumor out there is you guys may be moving to Dixie Springs. Can you confirm or deny?
It’s a possibility. 😊
@@LiteBrite the rumor is floating lol. We‘ll be neighbors hopefully.
👍
Shock teraphy
Can y’all let us know if Chris makes a TH-cam channel
We will. He doesn’t seem keen to it though
I like watching videos of you guys in the side by sides, but I’d personally never buy one. I’d just build a full sized that can do the same and more. But to each their own.
Yeah, good luck with that
You should rent one....
Fuel tank like a Pontiac fiero. Right in the middle between the seats.
👍❤️ #Jellynation
$35,000+ for all those issues and poor build quality??? No wonder I've never even considered a side by side.....
It's alot more than 35,000.. we just payed 44,000 for ours with the smart shocks. We absolutely love ours. There are certain areas that fit and finish isn't great but nothing like they are complaining about. My polaris had fit and finish issues as well. The car is amazing mabey they got a lemon I don't know.
Thank you for not taking the side by side during the event. So many others ignored the signs and came out anyways very annoying.
I’ll stick my my lame stock RZR 😂
Uhm.......... Why don't you just co-op the house with Hollie Mischief Maker? Y'all would still have enough personal space...
I think your IG got hacked
Dam kev, your going grey😂
It’s a shame the shop couldn’t do something about those ridiculous upper front A arms and spindles..no amount of suspension performance is worth how horrible they look. It just looks like Can Am was trying to look creative and completely missed the mark.
It’s call getting around patients and getting proper geometry
So that’s what proper geometry looks like..seems like there are hundreds of variations of a traditional double A arm designs that work perfectly without violating any patients or have poor upper arm geometry..lol That looks like the typical engineer that’s trying to reinvent the wheel with some ground breaking design ..I’m betting that spindle / upper arm configuration goes away along with the dipshit who dreamt it up.
@@Kyle-fu6en
They’re not “trying to look creative”, it’s a functional design that has real world practicality. They track and handle like they’re on rails with zero body roll.
So I should expect to see all the trophy trucks at the Baja 1000 switching to this new and far superior design..lol..probably not because that shit would get destroyed by debris in the desert. @@downbytheriver501
@@downbytheriver501 I watched the UTV KOH this morning and all the CanAm guys that started loosing air pressure had to deal with their tires hitting that stupid arm/spindle configuration…a was only a matter of time before they trashed a tire. Such an unnecessarily over engineered design.
🇺🇲🇺🇲🇺🇲🤘
why not wrap the front arms
Should have waiting and got the live shocks smh
Oof
BLAH BLAH BLAH
The RS 1.5 cage welds look terrible. I'm sorry, but those welds would not pass through my son's shop. They welds on yours looks way better tho.
The welds on the RS1.5 are top notch. Honestly they can’t get much better using MIG. Most people don’t want to pay for TIG. Thanks for 👍 on the Maverick R!
@@TheUTVPros That's true, the issue is with the MIG.
Pee is Good 👍😘
Firss..... nope. damnit.
Frist post 🎉
First