ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2024
- In this video tutorial we are modifying the HGLRC Draknight 2” Toothpick to make it compatible with the OpenIPC SSC338Q-IMX415 FPV AIO camera.
The video also contains the actual DVR from the maiden flight.
The range limitations are due to the ExpressLRS ceramic antenna.
You can buy this amazing drone from this link:
www.hglrc.com/products/hglrc-...
(This is not an affiliate link)
If you want please join my channel to get access to exclusive posts and updates:
/ @mariofpv
The camera that is on the drone, can encode up to 120fps or 3K 30fps!
All features from the large original camera are available!
OpenIPC FPV is the cheapest digital FPV system in the world!
Thanks to the WFB-ng link it has some serious long range capabilities.
Read more here: openipc.org/
You will find everything you need to start your own project!🎉
The system supports MAVLINK bidirectional telemetry which makes it a complete solution for a quadcopter or fixed wing/VTOL. It also has WFB-ng link preinstalled and this means it has serious long range capabilities.(up to 100+km!)
More information about this awesome OpenIPC camera will be in following videos so make sure you subscribe to not miss them!❤️
This is the moment you’ve been waiting for!
Pre-orders are now OPEN!
You might wanna hurry up because the first batch is only 100pcs.
store.openipc.org/
Enter your real data, because they must match the payer and recipient.
Please feel free to join our fast growing community:
t.me/EZWBC
You can also join our official OpenIPC facebook group:
/ 956912811789726
Massive thanks to Kenny Plus for his creation!👏
Quadcopter:
HGLRC Draknight 2” Toothpick
Battery: www.hobbyrc.co.uk/coddar-650m...
3D print CADDX Naked Vista Canopy: www.thingiverse.com/thing:456...
Transmitter: www.hobbyrc.co.uk/elrs-es24tx...
Goggles: Fatshark HDO with custom OpenIPC VRX
Music:
EDM Detection Mode by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
John Tasoulas - The Dead" is under a Creative Commons (CC-BY 3.0) license
/johntasoulas
Music promoted by BreakingCopyright: bit.ly/bc-the-dead-song
☆ Spotify: open.spotify.com/artist/5FTY4...
☆ Instagram : / justinbeats_
☆ SoundCloud : / thejustinbeats
Music from #InAudio: inaudio.org/
Infraction - Cassette
Pursuit by Peyruis / peyruis
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/38Ec1bt
Music promoted by Audio Library • Pursuit - Peyruis (No ...
Flashes by mezhdunami. / mezhdunami
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3tVJtCn
Music promoted by Audio Library • Flashes - Mezhdunami (... a
"Vyra - Defense Matrix" is under a Creative Commons license.
Music promoted by BreakingCopyright: bit.ly/2DQIVnI - บันเทิง
Drooling. REQUEST ! Could you please fly around small branches and objects ? since that's what is interesting with small quads and not open fields (more for planes) :)
Sure! But first I need to learn how to fly toothpicks! All these years I was flying 7” drones. They have completely different flying behaviour compared to this tiny 2” sub100 grams quad. Cheers mate!😊🍻
@@mariofpv would you send me , im running D8 , and interested in whoop.
I dont have the RTF tiny.
But experienced with cetus pro.
And self add Digital With high latency, i used my VRbox using android microusb capable to have uvc input, ived tried An old Logitech Uvc C110, it might be possible i can use your IPC, so sendme too.
If you willing to send me ill send you an address here im in Indonesia.
First large FPV manufacturer sponsoring? ;)
Lets go!
Yeap! And there is a larger one behind the scene but I can’t say anything at the moment. Cheers mate!😊🍻
@@mariofpvi guess either runcam or foxeer
more likely foxeer
@@marc_frankwhat about skyzone?
@@docekalt could be
no waaaaaay! finally we are getting a truly open alternative to digital fpv systems that is compact enough to be used on sub-250g quads! after hdzero saying "it's open" but using hardware that can only be bought from them, this feels like a dream come true! now just wondering how low latency can be achieved. have been spoiled by hdzero's 90fps low latency mode :P
Check the video description. Cheers mate!😊🍻
Cannot wait to get my hands on one. Absolutely amazing Job. Congratulations to you Mario and your Team.
Cheers mate!😊🍻
Congrats on the support! 🎉
Looking forward to the release of the OpenIPC board 😇🤤
Cheers mate!😊🍻
LOVE this Draknight!
Bookmarked before inevitable purchase, great footage thank you!
Really fun to fly and very well tuned! Totally recommend for OpenIPC build as well! HGLRC did a little miracle over there. Cheers mate!😊🍻
Congratulations! great job!
Cheers mate!😊🍻
What a awesome lil quad! The 1080 to me is perfect all around and what I would use….. that camera turns that little drone into exceptional!!
Will be available soon. Cheers mate!😊🍻
My friend. I go hard on toothpicks. This is amazing
Cheers mate!😊🍻
Would be cool to include some flying inside a house. That's the best use for such small quads )
Then my wife will kill me lol. I’m not a tiny whoop pilot mate. All these years I was flying long range 7” quadcopters with GPS and INAV. Now I need to learn how to fly 2” toothpick quads. Cheers mate!😊🍻
Excellent Mario !
Thank you for the support my friend!😊🙏
Just got into the hobby with a 7 inch Lr, i think this will be perfect for it!!
It’s exactly what you need for long range flights! The range is unbeatable. Cheers mate!😊🍻
Yeah, I reckon openipc is currently really good for long range, I just can't wait until we can get the latency a little lower so it is better for freestyle.
Latency tests added to the video description.
Freaking love my 2 inch I was gonna get this frame maybe I will try one out
This toothpick is so fun to fly! Well tuned out of the box! BF at its best! Cheers mate!😊🍻
Excellent Job! I can't wait to try, maybe we can push manufacturing.😀
Cheers mate!😊🍻
Thats awesome!!
Cheers mate!😊🍻
HGLRC stickin their neck out again nice one! congrats
Cheers mate!😊🍻
When can I purchase a unit from you? Starting to get back into flying and want to look at non dji options😊
Impressive.
Cheers mate!😊🍻
Good work, congrats !
Hope you can add osd for your next video
I added a minimalistic OSD for toothpicks yesterday. I’ll record a small video with my HDMI recorder and post it on my next video. Cheers mate!😊🍻
Another player on the market!! Definitely going to rattle some cages
Cheers mate!😊🍻
What if I want to have raspi on board for computer vision, how would that set up look like? Any tutorials to make use openipc with on board raspi? I assume openipc with work with any raspi cam?
We don’t support Raspberry Pi because they are outdated hardware with too slow GPU which results in high latency. They are not recommended for FPV. OpenIPC has 35ms low latency which is great for FPV flights. Cheers mate!😊🍻
Its interesting looks better then analog but theres a weird jitter to it like the quad has a bad shake but it seems like its the video feed itself shaking around. any idea why it looks like that? also wondering about that latency test haven't seen it yet.
Yes that’s from the bad PIDs of INAV. We call it “jello”. The motors are vibrating and the FC jitters. It requires tuning which is not the topic of this video. There are plenty videos for tuning PIDs to learn more. Other than that the video is much better in reality compared to what you see in my TH-cam video. Cheers mate!😊🍻
Latency tests will be on my next video so make sure you subscribe to not miss it. 😊
hi Mario I can see that right now that OpenIPC board only support h265 right now, how do think about supporting av1 down the line when hardware is abundant and cheap
OpenIPC supports h264 and h265. There are no plans to support AV1. Cheers mate!😊🍻
have you assembled a flight controller on the stm32 debugging board, does it make sense (I don't want to buy ready-made flight controllers)?
Personally I buy ready made flight controllers. Cheers mate!😊🍻
Amazing! Beautiful image. Can the brightness be adjusted if we want more details in the shadows?
Yes all settings can be adjusted even in the driver of the sensor! Cheers mate!😊🍻
OpenIPC is gold! I'm impationate to make my own fpv setup soon. By the way I have a question. In this and some of previous videos image quality is not very clear. There is some blurriness in the image even in 3K. What is the reason for that? Is the lens not focused perfectly or is the bitrate low? I watched other OpenIPC videos from youtube and some of them look much clear. Any clues?
It’s the combination of the lens I use and the fact that I’m always testing in low bitrate. You can increase the total link bitrate up to 52Mbps which will give you the best results. Cheers mate!😊🍻
As I see in aliexpress all camera modules are about 4x4mm size which is quite large for my quad to put on. Is there any option with smaller camera module similar to OpenIPC SSC338Q-IMX415 like in this video. Main board is OK but camera module should be small connected with cable. Any advices? Or should I wait for OpenIPC SSC338Q-IMX415 to be available for purchasing?
Yes, don’t buy those large Aliexpress cameras and wait for our custom AIO camera that is coming soon. Cheers mate!😊🍻
Do you have any suggestions on gimbals that would pair with OpenIPC ? either 2 axis or 3 axis would be helpful!
Any cheap gimbal will work. Just 3D print a nice case and put all the electronics in. Then use that case as a regular action camera for your gimbal. Cheers mate!😊🍻
Is onboard recording already tested on the prototype? It would also be nice to have gyro data on the sd card for gyroflow. Maybe it's possible to use the blackbox function of betaflight using uart?
I did a very quick test and it was working. I wasn’t so focused on this but I’ll definitely come back to this in the following days. Cheers mate!😊🍻
Does the camera or vtx have a gyro? I will we be able yo run this through gyroflow?
No gyro on this Air Unit but there are plans for future products. Cheers mate!😊🍻
Wow esto es inteligencia nivel dios 🎉🎉
Cheers mate!😊🍻
which camera and which board do you use?
Please read the video description. Everything you need to know is there with links to learn even more. Cheers mate!😊🍻
Ja man, prost 😊
Very good!!!!🎉🎉🎉🎉
Cheers mate!😊🍻
Yo bro, this is crazy! Will the recording of the gyrodata appear on the camera?
Or do the AIO and camera not have built-in gyroscopes or accelerometers?
This Air Unit doesn’t have gyro but there are plans to add a gyro for future products. Cheers mate!😊🍻
I want a few of them when can we get them?
If all goes well next month. Cheers mate!😊🍻
This is awesome for whoops so far.
Yeap, it’s perfect for whoops. Cheers mate!😊🍻
Maan! Congrats on your work. I have flown analog for quite a while and was thinking about going to Walksnail (the last versions seem way better than DJI - for me it's all about color and image). When I fly DJI it looks like I'm watching a video on my TV. Walksnail solved this problem.
BUT, HOWEVER, NONETHELESS OpenIPC seems to be ELRS in the beginning. I'll wait a little more to go digital.
The only thing I got about OpenIPC is from @14:17 to 15:25. At 14:17 it looks like there is a black wall and then many braches show up. Things like these can be tricky on freestyle.
Anyway, I think OpenIPC is n the right track to become an alternative.
Almost every day we are updating and improving the firmware. The team is also growing because more people are joining us. People who are also developers and want to have an open source digital FPV system. Cheers mate!😊🍻
Do you have any interest in trimming this down to something that would fly on a 65mm tiny whoop? The FCs have 25.5mm mounting holes and the boards dimensions are not much larger. I could sponsor a whoop. Maybe a Meteor65 or Mobula6?
Yes, there is a new “whoop” version coming in the next months with a 14mm camera. We are targeting the tiny whoops because we have a lot of people interested. Cheers mate!😊🍻
:D:D:D:D@@mariofpv
are you guys planning to make VRX for goggles like Cobra X V2 or a Universal one?
Maybe after we release the first camera. Cheers mate!😊🍻
Can you do some acro freestyle to demonstrate the latency?
I am not a pro freestyle pilot. Now that I have this toothpick I will start practising. I would do the same tricks and style of flights with an analog camera if that helps you understand my level as a pilot. Cheers mate!😊🍻
Here’s a better pilot than me:
th-cam.com/video/4iRVPW_Vqng/w-d-xo.htmlsi=tIymPrcTqygCGtiS
Love the OpenIPC!!! Drakenights arms are fragile.
I had many crashes with the Draknight and so far nothing happened to the frame. It feels very strong. Cheers mate!😊🍻
this is whats up!
Cheers mate!😊🍻
What do you watch it on?
Any goggles with HDMI IN port. Cheers mate!😊🍻
Awesome, send me a quad I I gonna see if this thing rip LMAO. Good job !
I need to learn how to fly a Toothpick. They are so agile and tiny! Thank you for your support! 😊🙏
@@mariofpv I love tiny toothpick because they are so discret and can freestyle like 5"
@electronicGRL also go inside trees and narrow gaps!
Need an Hdzero goggles module for OpenIPC :-) seems to be the best choice of goggles period, no?
Actually I’m planning to buy an HDZERO goggles because I believe these goggles are perfect for OpenIPC cameras. Cheers mate!😊🍻
@@mariofpv I look forward to seeing what you do for a compact RX solution - it'd be GREAT if it hung off the module mount on the side like the analogue module I'll need for my first tinywhoop does :-)
So close i call smell it. Drooools😮😮😮
Many people are drooling today. Thank you so much for your support!😊🙏
what is the latency on this? 20ms, 30ms, 40ms, 50ms, 60
It’s variable and depends on what decoder and monitor or goggles you use. The lowest possible result is 25ms! Cheers mate!😊🍻
When available need module for goggles.or a monitor how much they cost thank you
There are rumours that there will be goggles with 120Hz. Stay tuned. Cheers mate!😊🍻
How much latency? Camera to goggle screen pls
Latency tests added to the video description. Cheers mate!😊🍻
@@mariofpv hey i clicked the latency test link, it is redirecting to your community tab, could you check those links again
That’s because you will find the latency tests there lol…
@@mariofpv yeah i found it, didn't knew need to scroll down to 4 month old post 😂
glass to glass latency?
Check the video description. Cheers mate!😊🍻
My buttcheeks were clenching when you were soldering/desoldering with the propellers still on. I know from plenty of experience how easy it is to accidentally brush up against something plastic with the barrel of the iron while concentrating on the work.
Imagine also keeping an eye on recording a TH-cam video that will be seen by thousands… hahaha.
I guess you are right I should have taken the props off. Cheers mate!😊🍻
Haha I just melted a prop a lil the other day haha
Maybe you‘ll alsl get some decent screw drivers 😄
lol cheers mate!😊🍻
Where can I buy this?
It will be available in March if all goes well. Pre-orders will start soon. Cheers mate!😊🍻
Need todo proper range test can't fly far lol so.put on land vehicle rc car can go as far as you want no restriction in rc car hobby yet
Actually I’m planning to build an RC car with OpenIPC! Cheers mate!😊🍻
Can I ask what goggles are compatible with this please?
Any goggles with HDMI input port will work. I recommend HDZERO goggles for low latency. Cheers mate!😊🍻
@@mariofpvwould DJI V2 goggles rooted with Butter be a good option?
@@Kleinage What rooting DJI V2 would give you?
@blw0rm you can use it as 120fps goggles plugged on a laptop to decode h264 OpenIPC video feed.
@@mariofpv Mario, Are you talking about the Moonlight streaming?
Will schematics be available for the air unit? Would love to design my own PCB for it.
Keep up the good work man!
That will depend on how the cameras will sell in the first few months. Cheers mate!😊🍻
@@mariofpv Gotcha. Let me know