Awesome video definitely helpful thank you sr , my mechanic "friend " of my told me he can fix the issue for $1800 dollars cause he need to replace the whole head gasket of the compresor but I definitely going to try to do this you have teaching in you video God bless you , be safe out there sr
Vic my 2013 cascadia dd13 is building 140-160psi and i replaced the governer like you did and still psi is over 140 psi any idea if this is my issue btw im still runnin to keep the psi below 130 i cracked my petcock on the air tank
At the end of the air governor is screw there you adjust it from there turn it right and then watch the psi if it goes up, turn the left so it goes to where you want it
Oil in the coolant is usually a bad oil cooler not egr cooler. When egr coolers go bad you start losing coolant without any visible leaks because it gets burned up in the egr cooler.
Thanks Vic, I’m doing this this morning it helps a lot , I got the part directly from Freightliner $116 Canadian dollars .
Very very helpful. You saved me tones of money
never knew about this loading kit.thanks for posting this kind of videos
Awesome video definitely helpful thank you sr , my mechanic "friend " of my told me he can fix the issue for $1800 dollars cause he need to replace the whole head gasket of the compresor but I definitely going to try to do this you have teaching in you video
God bless you , be safe out there sr
How did you find the right parts. How I know the right parts for my air compressor 12.7 Detroit
My compressor not building air I have to accelerate a lot to get it to work a little. Brand new compressor. I’m trying this kit tomorrow. Thank you
Was it the uploader kit ???
Was it?
yes.i do know how to swap out a starter.ill be doing some more videos.to help people out .
Thank you.
Will you see with soapy spray or hear the air escaping? From the two caps?? Thanks
Hey change new compressor,new dryer,in governor do you why still 140 of air psi??!??
never knew about that load kit.cool vid
Thank you!
thank you so much bro🙏
Perfect it fix my problem my psi wasn’t passing 50 psi i change this and Woork good thanks
My truck stops at 50psi also then I have to give it gas to continue to build pressure
Yep just got it in amazon for 50 dollars
Thank you
Would you happen to know how to change out a starter? if so can u make a video....I love your videos keep them coming
gracias mijo dios te bendiga.
Vic my 2013 cascadia dd13 is building 140-160psi and i replaced the governer like you did and still psi is over 140 psi any idea if this is my issue btw im still runnin to keep the psi below 130 i cracked my petcock on the air tank
At the end of the air governor is screw there you adjust it from there turn it right and then watch the psi if it goes up, turn the left so it goes to where you want it
Thank you sir.
Is there a kit for a 2016 dd15?
yes theres a kid for all detroit engines
Very helpful thank you
My truck won’t build air at idle, no leaks, new air dryer cartridge, governor..could compressor be bad
check the loading kit or load kit,that could be your problem
Mine is leaking and is overcharging
Yes thank you sir for this video
Hi vic i got oil on my antifreeze reservoir can that happens if one of those o rings are bad,thanks.
no thats mayor issues,that could be that your egr coolant is going out,have someone look at your truck asap,
Oil in the coolant is usually a bad oil cooler not egr cooler. When egr coolers go bad you start losing coolant without any visible leaks because it gets burned up in the egr cooler.
For me doesn't work I buy the kit for 120.00 and put him and don't charge air it's not true.
Part number PLEASE
They told me they don't sell it at freightliner...i guess they want to sell me the whole compressor$850.00
i believe fleet pride sells it,good luck
Thank you