Francisco, remember the guy you met standing in the parts line at freighter Fontana? I said you are a light house for those of us trying to find safe harbor? Well you were my light house tonight. I started the truck tonight in Terrell Texas. Not building air. I've been noticing slow build the last few days. I have to deliver my load in a few hours. No help anywhere on a holiday. I did a bypass on the air dryer and woo hoo... I'm rolling again. I'll be at a shop after I deliver minus a tow minus a road call minus stress. Thanks my friend!!!
@3:48 so funny. This isn’t the problem, yes because this isn’t the problem. Hahaha. By the way senor...your videos are super helpful! Thanks for sharing your experience with us.☮️
Mine builds air fine. It's actually too much. Goes up to 140 before releasing pressure. I can hear it at the knobs on the dash building right before it releases. You didn't exactly clarify but it sounded like it can not let air build or not let air release.
Brother buenos dias te voy a agradecer mucho si me orientas como solucionar mi problema con my air brake dryer 2018 freightliner m2 106 con motor detroit DD5 4 CYL El air dryer dejo de purgar o de disparar aire le cambie todo el dryer assembly completo y ahora se purga o disparar aire cada minuto y cada vez que disparar aire se oye como que fuga aire en el compressor te agradecería si me puedes orientar como solucionar este problema
In my case that main hose coming out of the compressor got clogged all the way to the dryer including the dryer and the hose going to it ( 2011 Cascadia ) In case someone has the same problem after changing the valve.
I have a problem with my 2010 cascadia air compressor after fill up the air the air start coming back trough the air compressor vale and drain the air to get air build again I have to restart again do you think the part you mention is the problem please let me know also where you location is if I am close I can come through thank you
Do you have a video of how to replace this on a T680?I am on the side of the road right now. No air leak. But my truck won't build pressure and my trailer is loaded. Is there a way to bypass the governor, etc so that I can build up enough air pressure to make it to the Kenneth dealership?
Hi Francisco. Your videos have taught me a lot. I recently replaced my air dryer. But a few weeks later the 1/8" hose from the air dryer came off not from the dryer end but where it hooks up at the other end. Air was pumping out of the hose put my thumb over the end of the hose and got a loud pop now no bundled up of air pressure in my tanks. Can you direct me to that video or tell me where it hooks up. 2013 Cascadia DD13.Thank you.
Hi amaya my truck air compressor no cut of continuously running and air leaking from air dryer purge valve I put new governor and air dryer but still same
Francisco I have 2014 cascadia main hose se revento y fue remplasada al igual que la linea que va al air dryer y el compresor nuevo y sigue cargando lento por la mañana, tarda en subir a 100 psi unos 4 minutos eso es normal ?
possible causes: air leak between air compresor line and air dryer constant air leak weak air compressor leak on the air governor signal line to the compressor bad unloader valve
Hi did you fix your issue with continuous air buildup ? mine 2017 freight Line recently I just changed couple fittings air leaks now it turns to buildup continuously air to my air pressure gages and sneeze
Hello Mr Francisco, I really need help, I have truck in Fresno, CA, in Freightliner dealer, I want to tow it to your shop, engine overhaul, please help! I need your contact info, Thank you!
Tocayo did you have any idea why my air compressor the pop off valve it's leaking air and make lot noise.. the noise started like 120 pounds .. and not stop.. thanks man
Governor has been replaced but now no air is being released. This will create too much pressure n start to cause leaks. Air compressor n governor were replaced 2 mos ago n here we are again.
Hello Amaya, so I just got a new truck but last time I parked it for 5 days and it was in winter but when I turned it on it took abt 45 Minutes before the air pressure gouges could start moving up, but today I went back to it and turned it on for 2 hours and the air didn't build up at all until I gave up, it keeps making a sneezing noise from the engine compartment...what do u know about that? No air leak to me it just seems to be frozen because the weather temperature is below 20 and truck hasn't been going anywhere for about 2 weeks and half
I’m replacing a compressor. Due to pressure not building enough pressure. And it won’t go over 60 psi. Then check the hoses that connect to the compressor. And found they had black tar and contamination. Currently waiting on parts.
Nice people are getting hard to find and Honest people are almost impossible to find thanks for your video bro I'm not a truck driver however I do drive a Cummins 30' Box truck and we have some problems every now and then on the DEF situations so thanks for all your help very interesting very helpful
My air compressor sounds like a snare drum. Purges and keeps purging till 105 psi. Unloaded valve crapped out. Stupid idea to put the air compressor by the frame peterbilt did it the same way 🤬🤬
Francisco, remember the guy you met standing in the parts line at freighter Fontana? I said you are a light house for those of us trying to find safe harbor? Well you were my light house tonight. I started the truck tonight in Terrell Texas. Not building air. I've been noticing slow build the last few days. I have to deliver my load in a few hours. No help anywhere on a holiday. I did a bypass on the air dryer and woo hoo... I'm rolling again. I'll be at a shop after I deliver minus a tow minus a road call minus stress. Thanks my friend!!!
If anyone needs an easier way on the 13+, take the “dog house” off inside the cab. The piece under the dash. Can access it a lot easier
Damn…I gotta take you to dinner one day, you’ve saved me so much money. Thanx.
It’s funny when he said parts came with instructions but nobody reads it 🤣🤣🤣
I’m dealing with a 2013 cascadia dd15 very slow to build air
Just wanted to help you out. Your videos are very educational and helpful.
@3:48 so funny. This isn’t the problem, yes because this isn’t the problem. Hahaha.
By the way senor...your videos are super helpful! Thanks for sharing your experience with us.☮️
Mine builds air fine. It's actually too much. Goes up to 140 before releasing pressure. I can hear it at the knobs on the dash building right before it releases. You didn't exactly clarify but it sounded like it can not let air build or not let air release.
My 2017 Freightliner won’t build up air to but only 60 but I don’t hear air leak
What wad you issue when you found it
Brother buenos dias te voy a agradecer mucho si me orientas como solucionar mi problema con my air brake dryer
2018 freightliner m2 106 con motor detroit DD5 4 CYL
El air dryer dejo de purgar o de disparar aire le cambie todo el dryer assembly completo y ahora se purga o disparar aire cada minuto y cada vez que disparar aire se oye como que fuga aire en el compressor te agradecería si me puedes orientar como solucionar este problema
francisco i have a 2012 cascadia dd15 i am not building air pressure and the air is leaking through the compressor pressure valve what do you think
In my case that main hose coming out of the compressor got clogged all the way to the dryer including the dryer and the hose going to it ( 2011 Cascadia ) In case someone has the same problem after changing the valve.
did you have oil build up in your hose that clogged it?
Thanks dear first time knowing this problem love you keep doing videos
My unloader kit came in yesterday.I've already replaced the dryer,governor and the hot line....Your videos are super helpful thanks for all you do.
I have no air leaks anywhere and my cascadia is building air only 900-110 RPM!
I have a problem with my 2010 cascadia air compressor after fill up the air the air start coming back trough the air compressor vale and drain the air to get air build again I have to restart again do you think the part you mention is the problem please let me know also where you location is if I am close I can come through thank you
Sometimes the governor is also the problem
Muy bueno tu video. Ahora mismo 1/16/21 estoy con ese problema botado en una rest area en Iowa
Very good video body I’m having problems with my air compressor U have been a lot of help . Thanks
Where are you located in California ? Would bring my truck to you.
Learn something new every day
Thank you
Do you have a video of how to replace this on a T680?I am on the side of the road right now. No air leak. But my truck won't build pressure and my trailer is loaded. Is there a way to bypass the governor, etc so that I can build up enough air pressure to make it to the Kenneth dealership?
All I focused on is how many he said buuuuuuuttt
video này để em rảnh rồi xem sau nha anh
Mingermano tu eres un Dios en la tierra como Mechanico gracias por tu video
ANY VIDEO ABOUT SAM CAB FUSES BOX??
I have the same issue in the morning I have a 2011 Cascadia isx motor especially when it’s cold
The isx has a completely different style unloader valve. Usually we replace the head of the compressor
Chido Amaya!!
Tons of thanks
is it the same for a 2017
Hi Francisco. Your videos have taught me a lot. I recently replaced my air dryer. But a few weeks later the 1/8" hose from the air dryer came off not from the dryer end but where it hooks up at the other end. Air was pumping out of the hose put my thumb over the end of the hose and got a loud pop now no bundled up of air pressure in my tanks. Can you direct me to that video or tell me where it hooks up. 2013 Cascadia DD13.Thank you.
Where are you located?
I need a repair my truck whats your info shop location
California google it
I have leak water in air tank
Hi
Can you make whole video for replace fuel pump of 2015 cascadia step by step
Thanks!
Hi amaya my truck air compressor no cut of continuously running and air leaking from air dryer purge valve I put new governor and air dryer but still same
Heyy same problem did you solve a problem ? thanks
Yes i changed air compressor
Francisco I have 2014 cascadia main hose se revento y fue remplasada al igual que la linea que va al air dryer y el compresor nuevo y sigue cargando lento por la mañana, tarda en subir a 100 psi unos 4 minutos eso es normal ?
Please what's about continuing air building up with no stop?
possible causes:
air leak between air compresor line and air dryer
constant air leak
weak air compressor
leak on the air governor signal line to the compressor
bad unloader valve
Hi did you fix your issue with continuous air buildup ? mine 2017 freight Line recently I just changed couple fittings air leaks now it turns to buildup continuously air to my air pressure gages and sneeze
Francisco you have cash app?
If its frozen in there or stuck its probably gummed up so how yould you clean it? Brake cleaner om a rag and just push it in the hole?
Hello Mr Francisco, I really need help, I have truck in Fresno, CA, in Freightliner dealer, I want to tow it to your shop, engine overhaul, please help! I need your contact info,
Thank you!
Gracias raza
Just for info…I just paid $163 plus tax 🤦🏻♂️May-2022
Great video,but I would have just changed the air compressor….
What’s name this parts, I have question about my 2006 freightliner air issue one day is build air Next day is Not, any help thanks for your video
Tocayo did you have any idea why my air compressor the pop off valve it's leaking air and make lot noise.. the noise started like 120 pounds .. and not stop.. thanks man
Gracias, tengo miedo a intentarlo en la norte de Canada con -30C.
Espera El verano, llega pronto.!!! Y te cocinaras, bajo El Sol.!!!
Tengo un leak en las mageras desevicio cuando tengo el camion en park por favor ayuda yo me llamo Esteban muchas gracias
Governor has been replaced but now no air is being released. This will create too much pressure n start to cause leaks. Air compressor n governor were replaced 2 mos ago n here we are again.
I have 2016 cascadia i replaced the air dryer filter
Some beads fall off the old filter in the dryer
When you bye a new air compressor, does it come with a new uploader valve ?
Twenty fiiii
Hello Amaya, so I just got a new truck but last time I parked it for 5 days and it was in winter but when I turned it on it took abt 45 Minutes before the air pressure gouges could start moving up, but today I went back to it and turned it on for 2 hours and the air didn't build up at all until I gave up, it keeps making a sneezing noise from the engine compartment...what do u know about that? No air leak to me it just seems to be frozen because the weather temperature is below 20 and truck hasn't been going anywhere for about 2 weeks and half
Did you find out what was the problem?
Have the squealing noice from the air compressor area
How do you get it out if it’s stuck in the compressor
I’m replacing a compressor. Due to pressure not building enough pressure. And it won’t go over 60 psi. Then check the hoses that connect to the compressor. And found they had black tar and contamination. Currently waiting on parts.
Bro, did the issue get resolved once you changed the greasy main line or did you ultimately have to change the compressor?
Muy bien, tengo un problema no tengo aire el compressor hace mucho ruido y no produce aire
Gracias tengo ese problema
Donde esta tu taller Francisco?
Francisco en que estado esta
Very helpfull video
Lindo video hermano
I need your shop number I’m in California
You’re in Minnesota now lol
Where I can fund the air governor? I have to change it and I can’t find it
Late response..its on bottom of air dryer
Very helpful video,
Thanks 🙏
Buenas ya cambie el compressor nuevo, el air dryer y el governador y sigue levantando nomas a 50 psi y de ay no suve
Yo tengo el mismo problema ke tiene su troke el mio le sale mucho aire de la valbula de enfrente y no sure nada
Nice people are getting hard to find and Honest people are almost impossible to find thanks for your video bro I'm not a truck driver however I do drive a Cummins 30' Box truck and we have some problems every now and then on the DEF situations so thanks for all your help very interesting very helpful
My hero
Good job, ✌
👍
Muy buenas los vídeos mi amigo Gracias por eso Una pregunta cuál es mejor un motor motor dd13 dd15 dd 16 cual es el motor que mas molesta gracias
My air compressor sounds like a snare drum. Purges and keeps purging till 105 psi. Unloaded valve crapped out. Stupid idea to put the air compressor by the frame peterbilt did it the same way 🤬🤬