gotta love those Sacramento summers right? haha they are the worst. my buddy might be able to point you in the right direction for parts on the trans swap, he breathes BMW and has a lot of contacts in the area, he even just finished up swapping an E36 M3 drivetrain into an e34 525
I have a question on what differential I need for my 325 IC 5 speed with a M50 motor, I have a 411 in the car now which throws off the speed, and rev high at 70-80 miles per-hour?
Your video was super helpful in getting my new diff with studs in. I was trying to lift the diff up while attached to the driveshaft and bringing it up at an angle which was not gonna happen at all. Does your driveshaft have any longitudinal movement? I got the diff in place, but I can *not* get that damn driveshaft moved around enough to bolt the diff back up to it. If it could move towards the front that would be what I need.
Thanks dude. So on the driveshaft there’s a nut loosen that then it should slide back a bit. Sometimes it can also seize up so you may just have to take off the whole driveshaft
No clue I’ve never messed with anything without much power in a BMW. I know usually people that run higher horsepower set ups in other cars would use something like a Ford9 inch. But I’m not sure what kind of set up you’re looking to run. Drag or track.
+Ricky Archundia you know it! It was my grandfathers it's a Sears Roebuck made in Japan 🇯🇵 it's never let me down and it's super smooth as you can see.
Blake's Garage My fathers Sears jack just gave out after 40+ years of service, we bought all the seals to rebuild it. Hopefully I can get another 40+ out of it!
Haystack Malone I feel like if I do drift events that I'm going to want that space fore extra tires. But if I find it in unnecessary I may cut it out and full it.
Gaz Girl not sure what this is in reference too. But if I mess up pronouncing a word....who cares. Film yourself and play it back, I guarantee you will butcher at least a few words. Get over it!
@@BlakesGarage 5 Lug Conversion for the Rear and stronger Diff/Axles for boost I know a Russian Guy that swapped a E34 Subframe but he Used a Lada Niva suspension, I'm just going to Email Coilover companies If I could purchase from them E34 rear Coilovers with E30 Top mounts as for the Front Probably Just Get a Conversion kit or If lucky M3 knuckles
nice. i just found a 98 z3 with an lsd still at a nearby junkyard
for 50$. planning to get it tomorrow.
Nice work on this Blake!! More than I imagined I'll ever know about BMW diff's haha!! :) Cool!!
Hi Blake I'm really enjoying these car vids
+1 for not using cheap gear oil!!
So great...😂
LSD need 75-140
gotta love those Sacramento summers right? haha they are the worst. my buddy might be able to point you in the right direction for parts on the trans swap, he breathes BMW and has a lot of contacts in the area, he even just finished up swapping an E36 M3 drivetrain into an e34 525
Can You do a video of how to change transmission mounts on a E30 ? Please 🙏🏽
Bro great video easy to see and to follow along thanks for a great vid
BMW lsd diff Oil is a 75W-140 not a 75W-90.
Wasn't this supposed to be 5 speed swapped like a century ago?
KZNEvoX it will be. Still gathering parts. If you know anyone with a clutch pedal box let me know.
how did you remove the driveshaft bolts easily
Great video my son love your doggie voice
My speed sensor isn't connected. What are the consequences of this situation? I have the S4.10 diff with manual trans.
I have a question on what differential I need for my 325 IC 5 speed with a M50 motor, I have a 411 in the car now which throws off the speed, and rev high at 70-80 miles per-hour?
3.73 is the best
For speed?
yaaasssss, shits getting real now!
T-WRX Bert Agrees 🐶
5 speed swap!
do they have blinker fluid?
Hi, I'm following you from Iraq
Your video was super helpful in getting my new diff with studs in. I was trying to lift the diff up while attached to the driveshaft and bringing it up at an angle which was not gonna happen at all. Does your driveshaft have any longitudinal movement? I got the diff in place, but I can *not* get that damn driveshaft moved around enough to bolt the diff back up to it. If it could move towards the front that would be what I need.
Thanks dude. So on the driveshaft there’s a nut loosen that then it should slide back a bit. Sometimes it can also seize up so you may just have to take off the whole driveshaft
Bad ass hope its helping with auto x.
Where did you get the new diff?
So you are using a second mount because you’re drifting or on the track right? So if I just want it for my daily it’s not necessary ?
Yeah it’s mostly for abuse.
Hey buddy I got a question, I have a 91 318is that I’m building for over 1000 hp , what do you recommend for a differential swap
No clue I’ve never messed with anything without much power in a BMW. I know usually people that run higher horsepower set ups in other cars would use something like a Ford9 inch. But I’m not sure what kind of set up you’re looking to run. Drag or track.
What kind of safety glasses are those? Any issues with fogging up when you're getting hot and sweaty?
Austin Shaw I'm not sure I have some new one I'm getting soon that are bad ass. I will let you know when I get them.
Blake's Garage are they the pit viper clears you were rocking at the end of your carbon fiber vid?
Austin Shaw yep those are the ones. If you pick some up you can use coupon code "wrenchon"
Damn! Looks like I've got some work to do. How does the secondary diff mount feel, do you notice a difference?
+Jonas Van Horn much more solid feel between shifts. I like
Hello bro is there any difference after second mouth for diff ?
Oh yeah definitely feels way more solid
morning car video👍
blake's trusty green jack
+Ricky Archundia you know it! It was my grandfathers it's a Sears Roebuck made in Japan 🇯🇵 it's never let me down and it's super smooth as you can see.
Blake's Garage My fathers Sears jack just gave out after 40+ years of service, we bought all the seals to rebuild it. Hopefully I can get another 40+ out of it!
A.Mak hell yeah I'm sure you can good luck 👍
What is the replacement diff did u install? Which is the donor vehicle it came from
Smells like Rat-chet, great mechanic pun
Y u no cut remove spare tire well?
Haystack Malone I feel like if I do drift events that I'm going to want that space fore extra tires. But if I find it in unnecessary I may cut it out and full it.
Fair enough. I've thought about it on mine. Just because I've got a Z3M diff cover and it would look cool. not very functional, but cool.
Haystack Malone that would look bad ass. If I ever do a rear defuser it will be coming out .
11:38 supervisor check
niiiiiice!
do you know proper english? ? you mean diameter
Gaz Girl not sure what this is in reference too. But if I mess up pronouncing a word....who cares. Film yourself and play it back, I guarantee you will butcher at least a few words. Get over it!
BLAKE PLEASE REPLY! Could I Use E34 Front and Rear Strut suspension on my E30?
I have no idea why would you want to do that?
@@BlakesGarage 5 Lug Conversion for the Rear and stronger Diff/Axles for boost I know a Russian Guy that swapped a E34 Subframe but he Used a Lada Niva suspension, I'm just going to Email Coilover companies If I could purchase from them E34 rear Coilovers with E30 Top mounts as for the Front Probably Just Get a Conversion kit or If lucky M3 knuckles