There is a learning curve to using the kinect for scanning but, you can get a lazy susan from ikea get it to the right distance and do pretty well! let me know how it goes for you!
any idea why the solder just won't melt? Would it be the heat sink or just something wrong with my soldering iron? Only other time I've had this issue soldering was with a 360 controller
Hello, I bought a camera kinect for xbox one and the adapter 12 volts, 2.67 amperes. I want to use the kinect with windows 8.1 64 bits. I downloaded the SDK 2.0 and installed it before plugging the kinect. I saw that the device manager only detect the SENSOR NUI but not the camera. I am using a PCI Card usb 3.0 with chip renesas 720202 (because my computer doesn't have a build-in 3.0 USB) The problem is the kinect doesn't turn on any light, the fan is off. What would be the problem? Thanks in advanced, friend
What is this JRE file your talking about!? Also what would cause mine to turn on & off ,being reconized constantly every few secs? I have a 3.0 usb port& host controller,3A power adapter.As well as the SDK installed.
@@richduffgaming Personally if i remember correctly the way i resolved my issue is going to windows update, and a kinect update should get picked up. Dl it , &provided you have the correct files&folders in the correct places you should be good to go.
Ola amigo tudo bom, video bastante intuitivo, fiz todo o procedimento, porem fica reinicializando, fiz a reparação tbm de um conector de temperatura. Percebi que a ventoinha nao dispara, seria algum sistema de proteção esse desligamento devido o não resfriamento? Segue o video de como esta meu kinect, para ve se vc tem algum sugestão, obrigado. @-Vgk
Whats the comparison of the cam to a 920? He is playing his video a little fast so I can't tell the frame rate. I might buy one off ebay or start modding them for ebay if they beat a logi 920 with no problem.
Hi again so I ordered the 3d abyss shroud with the dc input built in. So I guess u r the manufacturer of these parts? Couple of questions first when removing the stickers to expose the t10 screws does the sticker have any sort of security markings that show up after removing them that make it easy to tell u opened it and voided the warranty or can they be replaced with no sign of tampering? Second when testing the connections with the multimeter what setting should I have it dialed into?
The screws do not, one of the stickers being peeled up will have the "Microsoft" imprint in them if heated up enough they will come off and not leave any mark. When testing connections you are looking if they are connected so Ohms. However most importantly you are checking to see if you have shorted it out to any other near by pins. The units themselves are already tested before shipping.
I have a 1520 Sensor bar... and want to do this so wondering which adapter is for mine? The rear port or side port? Also found that splicing through the original Kinect cable brings up all wires to actually solder to a USB3 cable... but with 2 wires over... a thin black white one (signal wire) and a grey one... all other wires match up. Do you know what these 2 extra wires might be for and is it possible to splice and solder in as opposed to doing your mod?
So this works with the 1520 sensor. The rear and side port do exactly the same thing. The rear port was replaced because people thought it was too stiff to plug in and unplug and there was no tactile feedback. The side port when you plug in the adapter there is a "click" so you know its all the way in, vs the old version where you would just push in as hard as you could. You actually can do the exact same mod by splicing the wires. However there are some downsides to this. 1) It wont look clean 2) All the wires are shielded, once you cut that away the shielding will no longer exist on the areas you cut and soldered. Therefore you are subject to signal interference. 3) It is very difficult to move and you could get connectivity issues when the wires move or shift. 4) there is a potential for humidity to seep into spliced connections over time. Aside from that everything else should be fine. You'll have to probe around to see what wires are what. 4 signal 2 power.
@@xUltraShadow I never got round to it. I just opened up and did the fast-track power wire soldering mod and used a separate cable for the USB. It works but would like sometime to buy the mod kit and do this soon.
did the mod , solders fine checked under scope , fans pulled and checkked they are dead - kinect powers on and keeps restarting in both my one x and pc with 3.o usb helllllp
If everything is fine, it could be your power supply. If it does not provide consistent 12v 3a it will shut off from under voltage. If your power supply can only peak at 3a it will shut off as well. I would first check if your power supply is putting out enough power. The second I would check is if there are any shorts to the board. That can cause the same result!
Well under ohms you would be looking for resistance values so not voltage. I set mine to 20k. Though it doesn't necessarily matter in this case, we are just looking for connection or no connection. The value itself is arbitrary. The wires are solid copper and conduct very well with very little resistance. You will be looking for connection for the dc jack + (inner pin) with the number 10 pin, and the Dc jack - (outter) with the ground. Also advisable to make sure there is no connection between 10 pin and its neighboring pins.
hello , im just want to cnow its works with all windows wersions or not? because I order parts do everythink good but when I connect nothink happen... no sound nothink...thanks
Before connecting you need to download the Run time environment and the sdk produced by microsoft, If the kit was installed correctly you should be able to hear that something has been connected and unknown. make sure both power connections and usb are firmly seated
You either have the choice of purchasing parts alone, or having the complete service done. The shroud and AC adapter is all the parts EXCEPT the USB cable. I had a customer ask for that option because he had already had a USB cable and did not want to purchase one. In the past they were all individualized, however it confused most people so only the most popular options were kept. The install service includes everything you need to run your kinect, you will have to mail your unit in, and provide return shipping as well. However all the parts will be included.
What buying option should I chose if I want to do this my self and just want the shroud with the dc adapter? I thought it would just be 10$ for the 3d abyss part it looks like it’s 40$ for just the 3d abyss shroud with the dc input plus 51$ for the other parts form amazon? This is way more then what I was expecting
You don't need to buy everything from amazon. Local dollar store or home depot may have your screw driver kits and adapters can be sourced from old components you have laying around. The cable itself is needed unless you have one laying around. Any 12v 3a(or higher amp) dc power supply will work. The very first unit i used was from a old Network attached storage I had laying around. Most routers also have 12v inputs. T10 torx can also be found at any hardware store or ordered online for under 5 bucks. Hope this helps, let me know if you need anything else!
i have an old HP laptop power supply i'm going to use. 12v 3.5a. hit up your local thrift store or electronic recycling place, bet you could find one cheap.
Ima bout to order the DIY kit and you stated that this works with Xbox one x. If I get the kit will that include everything need besides the tools? Also never had the Kinect for Xbox one but why does the original wire not work? What are we doing in the mod that makes it Xbox one x compatible?
Yes, the kit includes everything minus the tools. The reason why you need it is because, the Xbox One kinect has a proprietary plug that only is usable on the Original Xbox one. If you look at the back you will see a logo for a Kinect. That plug is not shared with any of the other Xbox one X or S units. Therefore this mod is needed. The original cable from the Xbox One Original Provides power and signal. The xbox one S and X are only able to provide signal, no power. Hope this helps any questions feel free to let me know! Thanks!
I tried, but it doesn't work.My model is 1595. The power adaptor is a 12V 3A so it is enough to power on the kinect. The first time I did a mistake and I soldered pin 10 with the red wire and 11 black wire -ground- . Later I realized that was wrong and I re-wired in the right way. Which model do you have?
Matteo, I have done 1595s and 1520s we have done close to 300 units with no issues. did you short anything out these chips are sensitive to electro static discharge
I found another kinect and I did all the steps correctly. I can see the light on and windows 10 recognized the device. I tried with camera, and depth3d Apps and everything worked fine. However, when I tried to use the SDK and the prebuilt apps everytime I have an error kinect not found.
Matteo, this might be a problem with the Kinect SDK, Microsoft has discontinued support for these SDKs. Which version are you running? Also the fan is controlled by a thermostat. If the unit does not get hot enough it will not come on. Unless you mean your unit is overheating til it shuts off? This was a somewhat common problem in some kinects. There are Four wires going to the fan, once you cut one of them (i'll have to look which one) It will keep the fan on all the time and bypass the controller.
yep you are right. I installed another SDK and now everything is working fine :) . My last question, I was looking to find the difference between 1520 and 1595, do you know anything about the two models ?
@@3dabyss53 thats not true the xbox one kinect is rated at 1.5 amps but it will only draw what is needed you could have a 5 amp power supply what is important is the voltage
I tried a 12v 2a and got no power switched it out to a 12v 4a still no power.. Do i need to plug it into the pc or xbox in order for it to show power?? The reason i ask is bc i actually jus fried my xbox one s internal power supply that im waitin for and if i plug into my pc i dont wanna fry that too!! Pleaae help asap
So there could have been a few possibilities, if the kinect was connected its possible a power surge could have gone into the unit. I am not sure if there is a fail safe on the unit itself. If you are plugging into PC You need the Kinect SDK downloaded first for your OS. Then you will see at the bottom it will say Kinect or NUC sensor detected. You can also verify this in your device manager. If working functioning it will act as a camera so you can use the Camera app in windows to test it.
i'm having an issue where it's turning off after some time while plugged into the one X console. unplug then plug it back in resolves the issue but it's driving me insane. o.O defeats the whole voice activation feature if i have to manually reboot. i've check and rechecked to see if i'm making some accidental short with no luck. nothing stands out as the obvious. happen to have any thoughts? suggestions? my power supply is a 12v5a. a barrel jack was soldered to the unit with a few inches of lead wire. maybe the jack wire is just too thick in this case? it's driving me bonkers.
Having a thicker wire shouldn't change anything. When it shuts off is it due to time or is it random. It could be either wire inconsistency, or overheating of your unit. Did you use the wires provided in one of our kits? We use only solid core copper wires so the chance of poor connection is very unlikely. Check to see if your fans turn off, and if its repeatable.
Hello brother , I tried it with 12v 2A but it did not work .. when i plug in pc it showing plugin and after few seconds it showing plugout....😕 what to do ... i really need help... pleaseee help
If you look at the website or watch til the end of the video, you will notice a 3a or higher adapter is needed under current could cause other problems, over draw and fire hazards.
3D Abyss 😅😅😁i am little bit worry about it.... by the way thank you brother for replaying 🤗 Can you give you email.? I shall send you some pics of problem.. .and my set up
So if its connected to a PC there could be various issues. Are both runtime environment and SDK installed? The unit will power on when plugged in for a moment when windows recognizes it as a usb device, then after it has loaded some preliminary drivers or attempts to it will shut it off. What error message is show as you stated? A few could be webcam is used by other application, or not ready. PC's are a bit more tricky because it could be a number of issues. I have no issues with it running on windows 10 pro, according to most it also can run on windows 8.
Both runtime and sdk are installed. The error message is "USB device not recognized". I don't even know what to do anymore..I tried it in both USB 2.0 and USB 3.0 ports, but am having the same problem. The PU is working fine, the cables are soldered right...all softwares installed...
Hmm, was the kinect tested before you modified it? Also what OS are you running? Windows usually wont throw a USB device not recognized if it was modified incorrectly, It would simply say an error has occurred. It might be another web cam driver conflicting. If you wnat you can message me I can help you trouble shoot over the phone or something that's faster
why not just strip the original cable and attach it to a normal usb3 and the extra 2 wires will be just the 12v line for whatever ad/dc adapter you have available
You absolutely could! its just not as durable. The wire splicing and hanging out over time will create issues. Also the change in resistance between wire gauges and how you sheath the wire from noise would be quite difficult. If you ever open up one of these wires you will notice some signal wires will have shielding over them. Its particularly hard to do if you just cut them all open and wired them together. You will get interference in that one blob that was unsheathed. Also mostly Kinects are used by kids. So the moving of the cables or bending wobbling will cause stress at those points where they are prone to break!
@@JackWagonOne I've modded the cable and it works flawlessly! If you want to know the color code i've made some comments under this video: th-cam.com/video/z7QejwPP0T0/w-d-xo.html
Hi 3D ABYSS; thanks for the video, i have question please; i dont understand, on this site, they recommand 12v 1a ; www.tatsch.it/kinect-2-usb-3-modification/ you advised to use 12v 3a, if you use a smaller than 36va (12v3a), you will damaged a motherboard? how? regards
They are incorrect, I own both the Original Xbox One S adapter from Microsoft and our kits. Original units are 2.67 Amps. If you run lower amperage the adapter is not designed for that load, what will happen is the wires and internal components WILL OVERHEAT, resulting insulation melting wires breaking and shorting, Not all wires will short at the same time, this will cause a SURGE into your unit, or a short circuit, damaging your board. A second possibility is, there is a internal fail safe for the adapter in the event of over draw it shuts off. This will just cause surges of electricity when it starts and shuts off sent to your unit... which also is not good for components. We have modified over 500 units, not a single complaint over the last year and a half.
Originally youtube limited the amount of time you can upload a video. Only reason to do so, instead of splitting it into part one and two it can be one video.
![⭐️( ลอยกระทง 2024 ) Ver. แดนซ์ Remix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/rMWOLhgXUHc/mqdefault.jpg)
JESUS H CHRIST DUDE, you should start rapping if that's your normal talking speed
He's dranked too many monster energy drinks lol
Why did it take me so long to find this video thank you this is EXACTLY the solution I've been looking for.
and it took half the time to explain it to you
is that going to cause a 12volt feed back on the 5 volt line to the computer?
great video. super easy. i need to use one of these for 3D modeling and your video just sold me on picking up a used XB1 kinect!
There is a learning curve to using the kinect for scanning but, you can get a lazy susan from ikea get it to the right distance and do pretty well! let me know how it goes for you!
Was this played at 2X speed or, does h e just talk that FN fast!? WOW! Thanks!
Cinemagic. Ignoring the Timecode.
any idea why the solder just won't melt? Would it be the heat sink or just something wrong with my soldering iron? Only other time I've had this issue soldering was with a 360 controller
Hello,
I bought a camera kinect for xbox one and the adapter 12 volts, 2.67 amperes. I want to use the kinect with windows 8.1 64 bits.
I downloaded the SDK 2.0 and installed it before plugging the kinect.
I saw that the device manager only detect the SENSOR NUI but not the camera.
I am using a PCI Card usb 3.0 with chip renesas 720202 (because my computer doesn't have a build-in 3.0 USB)
The problem is the kinect doesn't turn on any light, the fan is off.
What would be the problem?
Thanks in advanced, friend
What about the USB cable?
What is this JRE file your talking about!? Also what would cause mine to turn on & off ,being reconized constantly every few secs? I have a 3.0 usb port& host controller,3A power adapter.As well as the SDK installed.
saame issue you ever solve
@@richduffgaming Personally if i remember correctly the way i resolved my issue is going to windows update, and a kinect update should get picked up. Dl it , &provided you have the correct files&folders in the correct places you should be good to go.
thanks for the video, recently acquired a Xb one kinect and i tought of doing this mod, a 12V 4A power brick will work, right?
Yes it will
Ola amigo tudo bom, video bastante intuitivo, fiz todo o procedimento, porem fica reinicializando, fiz a reparação tbm de um conector de temperatura. Percebi que a ventoinha nao dispara, seria algum sistema de proteção esse desligamento devido o não resfriamento?
Segue o video de como esta meu kinect, para ve se vc tem algum sugestão, obrigado.
@-Vgk
Did you find the solution?
Whats the comparison of the cam to a 920? He is playing his video a little fast so I can't tell the frame rate. I might buy one off ebay or start modding them for ebay if they beat a logi 920 with no problem.
Hi again so I ordered the 3d abyss shroud with the dc input built in. So I guess u r the manufacturer of these parts? Couple of questions first when removing the stickers to expose the t10 screws does the sticker have any sort of security markings that show up after removing them that make it easy to tell u opened it and voided the warranty or can they be replaced with no sign of tampering?
Second when testing the connections with the multimeter what setting should I have it dialed into?
The screws do not, one of the stickers being peeled up will have the "Microsoft" imprint in them if heated up enough they will come off and not leave any mark. When testing connections you are looking if they are connected so Ohms. However most importantly you are checking to see if you have shorted it out to any other near by pins. The units themselves are already tested before shipping.
hi 3d abyss, could you upload the file of the usb cover?
thanks for the tutorial.
I have a 1520 Sensor bar... and want to do this so wondering which adapter is for mine? The rear port or side port?
Also found that splicing through the original Kinect cable brings up all wires to actually solder to a USB3 cable... but with 2 wires over... a thin black white one (signal wire) and a grey one... all other wires match up.
Do you know what these 2 extra wires might be for and is it possible to splice and solder in as opposed to doing your mod?
So this works with the 1520 sensor.
The rear and side port do exactly the same thing. The rear port was replaced because people thought it was too stiff to plug in and unplug and there was no tactile feedback. The side port when you plug in the adapter there is a "click" so you know its all the way in, vs the old version where you would just push in as hard as you could.
You actually can do the exact same mod by splicing the wires. However there are some downsides to this.
1) It wont look clean
2) All the wires are shielded, once you cut that away the shielding will no longer exist on the areas you cut and soldered. Therefore you are subject to signal interference.
3) It is very difficult to move and you could get connectivity issues when the wires move or shift.
4) there is a potential for humidity to seep into spliced connections over time.
Aside from that everything else should be fine. You'll have to probe around to see what wires are what. 4 signal 2 power.
Hey, how did it work out for you? I'm also thinking of splicing my Kinect cable.
@@xUltraShadow I never got round to it. I just opened up and did the fast-track power wire soldering mod and used a separate cable for the USB. It works but would like sometime to buy the mod kit and do this soon.
I managed to reverse the polarity, any idea if it is repairable? I can replace SMD:s but no idea which component that could fry... Thanks!
did the mod , solders fine checked under scope , fans pulled and checkked they are dead - kinect powers on and keeps restarting in both my one x and pc with 3.o usb helllllp
If everything is fine, it could be your power supply. If it does not provide consistent 12v 3a it will shut off from under voltage. If your power supply can only peak at 3a it will shut off as well. I would first check if your power supply is putting out enough power. The second I would check is if there are any shorts to the board. That can cause the same result!
What voltage on ohms setting my meter has many different voltage settings under ohms
Well under ohms you would be looking for resistance values so not voltage. I set mine to 20k. Though it doesn't necessarily matter in this case, we are just looking for connection or no connection. The value itself is arbitrary. The wires are solid copper and conduct very well with very little resistance. You will be looking for connection for the dc jack + (inner pin) with the number 10 pin, and the Dc jack - (outter) with the ground. Also advisable to make sure there is no connection between 10 pin and its neighboring pins.
hello , im just want to cnow its works with all windows wersions or not? because I order parts do everythink good but when I connect nothink happen... no sound nothink...thanks
Before connecting you need to download the Run time environment and the sdk produced by microsoft, If the kit was installed correctly you should be able to hear that something has been connected and unknown. make sure both power connections and usb are firmly seated
Does the DIY kit come with the shroud, ac adapter, and cable?
Yes!
3D Abyss outstanding, just ordered it.
Thanks, it works fine
So what's the install service.. 75 and then I send u my kinect?. Also.. Which service is the one that comes with the shroud and the ac adapter
You either have the choice of purchasing parts alone, or having the complete service done. The shroud and AC adapter is all the parts EXCEPT the USB cable. I had a customer ask for that option because he had already had a USB cable and did not want to purchase one. In the past they were all individualized, however it confused most people so only the most popular options were kept. The install service includes everything you need to run your kinect, you will have to mail your unit in, and provide return shipping as well. However all the parts will be included.
What buying option should I chose if I want to do this my self and just want the shroud with the dc adapter? I thought it would just be 10$ for the 3d abyss part it looks like it’s 40$ for just the 3d abyss shroud with the dc input plus 51$ for the other parts form amazon? This is way more then what I was expecting
You don't need to buy everything from amazon. Local dollar store or home depot may have your screw driver kits and adapters can be sourced from old components you have laying around. The cable itself is needed unless you have one laying around. Any 12v 3a(or higher amp) dc power supply will work. The very first unit i used was from a old Network attached storage I had laying around. Most routers also have 12v inputs. T10 torx can also be found at any hardware store or ordered online for under 5 bucks. Hope this helps, let me know if you need anything else!
i have an old HP laptop power supply i'm going to use. 12v 3.5a. hit up your local thrift store or electronic recycling place, bet you could find one cheap.
Its the luck of the draw, local goodwill I have seen have a few for sale from random laptops, routers etc!
Ima bout to order the DIY kit and you stated that this works with Xbox one x. If I get the kit will that include everything need besides the tools? Also never had the Kinect for Xbox one but why does the original wire not work? What are we doing in the mod that makes it Xbox one x compatible?
Yes, the kit includes everything minus the tools. The reason why you need it is because, the Xbox One kinect has a proprietary plug that only is usable on the Original Xbox one. If you look at the back you will see a logo for a Kinect. That plug is not shared with any of the other Xbox one X or S units. Therefore this mod is needed. The original cable from the Xbox One Original Provides power and signal. The xbox one S and X are only able to provide signal, no power. Hope this helps any questions feel free to let me know! Thanks!
@kagamutora Also if you don't have the tools we do also carry fully modified and tested units! Thanks
Thanks, though I don't have a Kinect.
Awesome video
shipping costs for that shroud costs more then the shroud itself
I tried, but it doesn't work.My model is 1595. The power adaptor is a 12V 3A so it is enough to power on the kinect. The first time I did a mistake and I soldered pin 10 with the red wire and 11 black wire -ground- . Later I realized that was wrong and I re-wired in the right way. Which model do you have?
Matteo, I have done 1595s and 1520s we have done close to 300 units with no issues. did you short anything out these chips are sensitive to electro static discharge
I found another kinect and I did all the steps correctly. I can see the light on and windows 10 recognized the device. I tried with camera, and depth3d Apps and everything worked fine. However, when I tried to use the SDK and the prebuilt apps everytime I have an error kinect not found.
Also, I forgot, the fan is not spinning :(
Matteo, this might be a problem with the Kinect SDK, Microsoft has discontinued support for these SDKs. Which version are you running? Also the fan is controlled by a thermostat. If the unit does not get hot enough it will not come on. Unless you mean your unit is overheating til it shuts off? This was a somewhat common problem in some kinects. There are Four wires going to the fan, once you cut one of them (i'll have to look which one) It will keep the fan on all the time and bypass the controller.
yep you are right. I installed another SDK and now everything is working fine :) . My last question, I was looking to find the difference between 1520 and 1595, do you know anything about the two models ?
I don't know if anyone can answer me but how much amps do the Kinect needs, what the minimum amps need?
You will need a 3a or higher adapter, Stock unit is 2.67 amps. Cheers!
@@3dabyss53 thats not true the xbox one kinect is rated at 1.5 amps but it will only draw what is needed you could have a 5 amp power supply what is important is the voltage
I tried a 12v 2a and got no power switched it out to a 12v 4a still no power.. Do i need to plug it into the pc or xbox in order for it to show power?? The reason i ask is bc i actually jus fried my xbox one s internal power supply that im waitin for and if i plug into my pc i dont wanna fry that too!! Pleaae help asap
What pin is the positive pin and which one is negative .. Im tryin to test with the voltmeter
Yes, the usb needs to signal for the unit to turn on. Or else you would just have a unit running on 24-7 even when you are not using it.
Jason Xu its not startin up period 😢
So there could have been a few possibilities, if the kinect was connected its possible a power surge could have gone into the unit. I am not sure if there is a fail safe on the unit itself. If you are plugging into PC You need the Kinect SDK downloaded first for your OS. Then you will see at the bottom it will say Kinect or NUC sensor detected. You can also verify this in your device manager. If working functioning it will act as a camera so you can use the Camera app in windows to test it.
i'm having an issue where it's turning off after some time while plugged into the one X console. unplug then plug it back in resolves the issue but it's driving me insane. o.O defeats the whole voice activation feature if i have to manually reboot.
i've check and rechecked to see if i'm making some accidental short with no luck. nothing stands out as the obvious. happen to have any thoughts? suggestions? my power supply is a 12v5a. a barrel jack was soldered to the unit with a few inches of lead wire. maybe the jack wire is just too thick in this case? it's driving me bonkers.
Having a thicker wire shouldn't change anything. When it shuts off is it due to time or is it random. It could be either wire inconsistency, or overheating of your unit. Did you use the wires provided in one of our kits? We use only solid core copper wires so the chance of poor connection is very unlikely. Check to see if your fans turn off, and if its repeatable.
very good
Hello brother ,
I tried it with 12v 2A but it did not work .. when i plug in pc it showing plugin and after few seconds it showing plugout....😕 what to do ... i really need help... pleaseee help
If you look at the website or watch til the end of the video, you will notice a 3a or higher adapter is needed under current could cause other problems, over draw and fire hazards.
3D Abyss 😅😅😁i am little bit worry about it.... by the way thank you brother for replaying 🤗
Can you give you email.?
I shall send you some pics of problem.. .and my set up
Sure thing! I'll message you directly thanks!
3D Abyss how ?
On TH-cam directly or on email..
naveenimagineer50005@gmail.com
They must have changed it you could before. Anyways I sent you an email!
yooo i checked my playback speed like twice lol
I did everything as told, but it keeps conecting/disconnecting, and an error message is shown..
Two things, Did you check the output of the power supply and make sure its over 12v? Second is it connected to a xbox or pc?
3D Abyss yes, it’s a 12v power supply, and it’s connected to a pc
So if its connected to a PC there could be various issues. Are both runtime environment and SDK installed? The unit will power on when plugged in for a moment when windows recognizes it as a usb device, then after it has loaded some preliminary drivers or attempts to it will shut it off. What error message is show as you stated? A few could be webcam is used by other application, or not ready. PC's are a bit more tricky because it could be a number of issues. I have no issues with it running on windows 10 pro, according to most it also can run on windows 8.
Both runtime and sdk are installed. The error message is "USB device not recognized". I don't even know what to do anymore..I tried it in both USB 2.0 and USB 3.0 ports, but am having the same problem. The PU is working fine, the cables are soldered right...all softwares installed...
Hmm, was the kinect tested before you modified it? Also what OS are you running? Windows usually wont throw a USB device not recognized if it was modified incorrectly, It would simply say an error has occurred. It might be another web cam driver conflicting. If you wnat you can message me I can help you trouble shoot over the phone or something that's faster
I cant for the life of me get it to work. pc just keeps popping up as usb not reconized
Did you download the SDK and JRE for the kinect ?
@@3dabyss53 i downloaded the kinect for windows. But i have a feeling it might be because i dont have a USB 3.0 controller on my pc
why not just strip the original cable and attach it to a normal usb3 and the extra 2 wires will be just the 12v line for whatever ad/dc adapter you have available
You absolutely could! its just not as durable. The wire splicing and hanging out over time will create issues. Also the change in resistance between wire gauges and how you sheath the wire from noise would be quite difficult. If you ever open up one of these wires you will notice some signal wires will have shielding over them. Its particularly hard to do if you just cut them all open and wired them together. You will get interference in that one blob that was unsheathed. Also mostly Kinects are used by kids. So the moving of the cables or bending wobbling will cause stress at those points where they are prone to break!
it wont work
oh it did, just need to cut cleanly and solder every link accordingly, follow a usb3 A-B pinout diagram
@EspHack ~ Did you happen to document and share this anywhere?
@@JackWagonOne I've modded the cable and it works flawlessly! If you want to know the color code i've made some comments under this video: th-cam.com/video/z7QejwPP0T0/w-d-xo.html
Where can I order the kit?
www.etsy.com/listing/588342179/xbox-kinect-adapter-one-s-pc-xbox-one-s?ref=shop_home_feat_1
Weller doesn't make good soldering irons either bud...
Hi 3D ABYSS; thanks for the video, i have question please;
i dont understand, on this site, they recommand 12v 1a ;
www.tatsch.it/kinect-2-usb-3-modification/
you advised to use 12v 3a, if you use a smaller than 36va (12v3a), you will damaged a motherboard? how?
regards
They are incorrect, I own both the Original Xbox One S adapter from Microsoft and our kits. Original units are 2.67 Amps. If you run lower amperage the adapter is not designed for that load, what will happen is the wires and internal components WILL OVERHEAT, resulting insulation melting wires breaking and shorting, Not all wires will short at the same time, this will cause a SURGE into your unit, or a short circuit, damaging your board. A second possibility is, there is a internal fail safe for the adapter in the event of over draw it shuts off. This will just cause surges of electricity when it starts and shuts off sent to your unit... which also is not good for components. We have modified over 500 units, not a single complaint over the last year and a half.
boy you talk fast, but good video
Is this sped up or does this guy talk that fast?
play at 0.75 speed. god knows why he sped it up
Why did you make the video 25% faster there is no need for that
Originally youtube limited the amount of time you can upload a video. Only reason to do so, instead of splitting it into part one and two it can be one video.
3D Abyss oh ok i didn't know. What was the old limit then?
IIRC it was 18 minutes, after that either it was split or you had to jump through a bunch of hoops for verification and uploading guidelines.
Could you mod mines for me? :D
Sure you can message us on Etsy!
sent
speed: 0.75
Shut slow down don't taik so fast ffs