TrackMan VS GC Quad Indoor Testing
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- SGT is back to filming! After being away and moving locations we have come back with a bang. In todays video I put TrackMan up against GC Quad to see which performs better in an indoor setting.
Check out our website - sydneygolftech....
Follow SGT on Instagram - www.instagram....
Follow SGT on Facebook - / sydneygolftech
Great video! Club data is a no brainer. Quad accuracy is umatched due how different both technologies work. Indoor I would say that Quad is clearly ahead overall. Outdoor things set closer
At 4m indoor ball flight with velocity of 112mph at 5200rpm the ball will complete 6.8 revolutions by the time it hits the screen in 79ms. So more than enough data for Trackman. It’s limit of needing 2 revolutions will be anything above 160mph and 2200rpm (2.025 revolutions at 4m in 56ms)
Trackman has told us that a driver will only result in 1 revolution of the ball before it hits the screen so hence why the RCT ball works. My testing shows that the RCT picks up the spin while a normal ball is not read all the time.
@@SydneyGolfTech I'll have to try the RCT ball as my mevo plus required you to apply small aluminum dots on the ball and face the away from the mevo when hitting indoors. Problem is that repeated strikes on the same part of the ball led to accelerated ball failures.
@@Timski2543RCT balls work really well with the Mevo units
Seems like there was a discrepancy in angle of attack. Would like to see a comparison with AoA, club path, and face to path side by side. Not really worried about spin or calculated carry..cheers
Quad takes several pictures of ACTUAL impact so if I were a betting man regarding strike locations, and spin based on face to path and face direction I would wager that quad is more precise indoors.
It really gets down to the algorithms between the systems. Both are calculated in relation to ball flight and testing shows that spin, launch and ball speed are very similar. I think quad does a little better job of impact location, but only if the stickers are precisely placed.
If I go to a fitter that uses the TrackMan, but does not offer the TrackMan special golf balls, should I be concerned about the accuracy of the fitting?
Great to see you back master Greg love all your stuff.
It’s good to be back. Plenty of content coming soon.
How do the machines know where the ball is contacted on the club?
The quad has 2 cameras pointed at the club face while the Trackman has a camera pointed at the club from 2.1m behind the hitting zone.
@@SydneyGolfTech thanks for the reply. How does the camera see that if it isnt face on? How can trackman see the face contact when it is behind the ball (gcquad on the side)? Honest question
@@vincentkingsdale8334 I don’t know and I worry a little about the accuracy of the Trackman.
@@SydneyGolfTech fair enough. Thanks. Good video too.
thanks for the video. I think you were comparing total spin (spin rate) on trackman vs backspin on the quad. That's ok when the spin axis is low, but it isn't always low.
Welcome back!
It’s great to be back 😃
Thank you for the comparison video. May I know your distance from ball to the screen? At least for spin axis reading, the longer distance the better so I was wondering. Also after using RCT balls, have you still encountered any italicized total spin readings for Trackman? Thanks.
I have 4m of flight and in thousands of shots, rarely see a missread or guess on the spin number. RCT works really well.
@@SydneyGolfTech Thanks for your response. 13’ is longer than optimal (12’). So should capture most of the shots and you should try by adding even more lumen (lightings) to see if Trackman can capture even more impact location to capture spin axis better. I personally have had a lot success after OERT firmware update (although that was 2-3yrs ago, I haven’t been able to play/test these days) in my enclosure (12~13’ from ball to screen, TrackMan 4 and Quad).
could you do this test again but outside on a driving range? Would be great to see how both pickup vs actual ball flight. And try to hook/slice a few to see how they pick those up outdoors as well. good stuff!
That would be a great test for sure!!
new digs starting to shape up nicely, might be coming back to you soon as my Wilson CBs have arrived and I'm not convinced they've got the lie angles right at the factory...absolutely loving the Nippons you fit me in by the way, I've finally got my swing dialed into them and shot one of my best rounds of the year on Wednesday, cheers and thanks again!
That’s awesome to hear. I’d be happy to check the Wilson’s for you. Cheers.
So glad you are back! Was worried! Hope you get to the new Titleist irons soon!
Angle of attack difference generally caused from Trackman reading the COM of the club head, which is still coming down relative to the face at the moment of impact, where quad reads the face hence the more upwards AoA
That’s correct. Centre of mass will produce different readings.
Center of geometry. Radar has no idea where mass is located.
@@keisarinn thanks for the clarification 🙄
trackman out door, QC4 indoor simple. we have 5 qc4
Why is it that simple? Do you believe TM measures club face data better outdoors than it does indoors?
Martinez Robert Young Anna Lopez Laura
Ive used both extensively. Quad is 100% better indoors especially with higher speed players. Trackman was really bad factoring gear effect. You could hit that bad toe hook and trackman would register a push fade. But as far as use for instructors i think trackman has way more to offer. If i was outdoors or an instructor id use trackman, if youre a fitter thats indoors, quad for sure
I agree with all of what you have said. If foresight had better software it would be a much nicer user experience.
Grant Shoals
8241 Reichel Views
Wehner Dale
Hey mate, welcome back & loving the new studio, looking fwd to the upcoming content. Q- do u offer any tips / advice on golf swing (remotely-I’m in Bris)? Trying to get driver speed up from 90mph to 100-105mph & have always been interested in your effortless & effectiveness swing in achieving 100+ club speed….trying to make big changes with my swing but speeds are not improving
18108 Bruen Way
Great video GB!
Thanks mate. Hope you are well.
We need a video tour of the new digs, Greg.
Lol. It’s free to come and visit 😉
my worry is that visiting would result in being very not-free 💸🤣
You need to look at the standard deviation for some of those shots. There may not be the differences you presumed.
I don’t quite understand what you mean.
@@SydneyGolfTech if you look at the SD on the trackman data your distances on some shots were +/- 8m. That’s a lot off the quoted figure. Quite a wide error by trackman.
@@myopenmind527 SD does not mean how close the guess is. It is the standard deviation of all recorded shots.
Mueller River
Around 100mph swing speed its highly unlikely the ball will carry that far with a hooky draw as shown on the quad. Trackman seems more reasonable. According to TXG at 100mph the optimal distance is 270 YARDS and thats the optimal. A hooky draw goes 236 Metres carry thats around 258 yards seems rather inflated by the quad to me.
The longest shot you can possibly hit it a “hooky draw”. 43 years of observing feels and seeing my ball fly gives me a really good chance of knowing how my ball will fly when I hit it. While I’ll admit I think the quad can over inflate the distance on a low spinning drive, it never misses the spin direction. The Trackman sometimes will show a hook when the ball was clearly going to fade due to a low heel strike.
With the driver diff this is all down to algorithms. Would tend to trust trackman more as got a lot of data from outdoor testing to base on. Quad known for being bit generous on low spinners
Quad algorithm is based on measured face contact and ball launch. There is no product on the market that does a better job with club numbers than Quad. Trackman struggles with face data indoors and outdoors but does an amazing job of tracking the ball when outside. There’s no better product on the market when it comes to outdoor tracking. I’ll take the low spin generosity with extremely accurate club data every day as a fitter.
@@SydneyGolfTech the ball flight algorithm uses 5 parameters : bs, sa, spin,launch and HL.prefer trackman ball flight algorithm which is based on work done by optimal flight. But yes agree quad is much better indoors and have gc3 myself which is very similar to quad. Only issue I have is is those low spin drives
@@russellfothergill9082 the problem with the Trackman algorithm is that it’s guessing most of the 5 parameters indoors. Quad doesn’t guess any. I have had the gc3 and quad together and they are different too.
@@SydneyGolfTech but for most of your testing especially with the ract ball they were aligned. Ie the 5 measured parameters agreed. They were then ploughed into different algorithms to come up with the ball flight model. I believe trackman ball flight model to be superior due to the outside testing they have done observing how far a 150 bs with 12 launch etc will carry and behave in temperature of 25 with little wind. Quad is good for ego but bad when you need to carry that bunker irl.
Test outdoors on a calm day with different balls. The Quad is tuned for one ball whereas trackman will show the true flight of any ball. Of course you need a rangefinder and assistant as well.
Quad is tuned for one ball? The quad works with every ball on every shot. If that was the case, there would not have been more Quads (nearly 60%) on the range at The Players than Trackmans.
@@SydneyGolfTech Do dimple designs affect aerodynamics? What about composition? 2 piece vs. 4 piece? You’re saying when every ball has the same launch conditions and spin they also fly the same in the real world? Are some balls better in the wind? Think about it. It applies the same flight algorithm to every ball regardless of design. Perhaps every ball really is the same and there’s just a bunch of marketing going on. That’s why an outdoor test comparing trajectories of different balls would be interesting. ps - The reason for more Quads on the range could vary. Quads, AFAIK are provided free at PGA events. Quads provide better club data due to the stickers and cameras. Quads are very portable. Quads have tended to be much better indoors in the past than Trackman.
Pros get their distances from practice rounds, rangefinders, weather on the day, Trackman and a lifetime of experience. On the course during events it's always Trackman providing ball flight data. Why not use Quads there too? Because they don't track reality. Whenever I've seen GCQuad tested vs. a Laser Rangefinder there's always a variance.
@@-Thunder I’m sorry but it’s clear you don’t know how the quad works so I’ll explain it to you as best as I can. It measures (not guesses) the ball from a stationary position to another position in flight. Therefore all of your above mentioned points are taken into consideration when working out where the ball will go. So like I said before, the quad works with all balls. So for example, over the measured distance, the range ball will already have a slower speed than say a Pro V1 and therefore it will not fly as far. I hope this helps with your understanding of how the quad works.
@@SydneyGolfTech You make a lot of assumptions. GC Quad captures a few inches of flight data at 10,000 FPS and calculates from there. Perhaps that actually does work with any dimple pattern but I'm guessing just like airfoils perform differently so do dimple patterns. So the profile of the flight trajectory and landing angle shouldn't be the same with different dimple designs and patterns UNLESS dimple design is irrelevant. Is that really so tough to agree with?
@@-Thunder dimple patterns have an effect on launch, spin and speed which is all measured.
I play on trackman all the time, your data seems way off, like your at below sea level. Take for instance pause it @ 12:30, you have 99.6 club speed, 146.6 ball speed, 1990 spin rate, 11.2 launch angle, 1.47 smash factor, with 202.8 carry & 237.9 total?? Your settings must be off or your trackman has an issue. I play on it all the time, a couple days per week and with those numbers carry would be 245-250, total would be 270-275. I don’t like quad, last time I played on quad I got super deflated spin rate numbers and inflated carry numbers that would never happen on trackman or on the golf course. For instance, on quad I was hitting driver 96 mph swing speed, giving me 1,400-1,700 spin, 1.52 smash factor (which is impossible) with 295 yard total. My swing speed is right around 100 or a couple mph less. I definitely don’t drive the ball even 270 yards on the course, trackman usually reads my drives somewhere in the neighborhood of 265-270 which I think is more feasible.
As I stated in the video, I’m not particularly versed in Trackman but I know that my Trackman was set up by Trackman and not by me. I’d dare say that there are no problems with the settings, but I could be wrong. I also know that the TM struggles with impact location and this is where the quad is far better. I haven’t had a TM out on course, but I know when I have taken the quad, it’s extremely accurate. I also have a great grasp of what my ball does after 43 years of golf and 23 of them as a professional.
The carry distance on that shot you reference was so short because of the spin axis. Also there's a few reasons you can get unrealistically high efficiency numbers from GCQ, the biggest ones being that the stickers are not placed quite correctly or the toe of the club catches the mat slightly before impact. The numbers you quoted would suggest the latter with your actual club speed probably being around 102mph. Normally the maximum efficiency/smash from a FS monitor is going to be around 1.45 vs 1.5 on the TM. If you're getting higher than 1.45 that usually means either a sticker placement issue or something caused the toe to decelerate shortly before impact.
@@williamhumber5890 like I said in the video, I didn’t hit that shot. I’m very in tune with my ball flight. It was a missread. Also, my sticker placement is extremely accurate all the time. I know the importance of it and hence why I make sure it’s good.
@@SydneyGolfTech We're in agreement here, the shot the other poster referenced was so short in carry because the spin axis from Trackman was way off; not because of the launch conditions that he highlighted but because of the one he ignored. As for the sticker placement, I didn't see any unusual numbers in your video that would suggest there was any issue with the fiducials, I was referring to the experience of the other poster where he mentioned getting an efficiency of 1.52. When that happens it's usually because of an error with the sticker placement or that the turf slowed down the toe immediately before impact. What you found in this video is exactly why we just saw Trackman release a hybrid photometric/radar unit in the Trackman IO, there are just inherent limitations to purely radar units indoors.
Foresight low backspin (less than 2500rpm) algorithm is kicking into inflating the carry distance anywhere from 5-20yds farther that’s why. Trackman carry is more in line with real life.
I think it’s a little inaccurate to say that they are as good as eachother. The quad is superior in every metric.
Radar technology is never going to be as accurate and that is why quad is the industry standard. And to say you can’t know what’s right..? The quad has 4 cameras purely designed to track the impact location; the angle that the centre of the ball rising… the only reason why anyone would say that TM is equal to GC is if they use TM for fittings instead of another business that used GC.
The quad relies on an algorithm, while the Trackman tracks the ball. Just because the quad takes photos of the ball doesn’t mean the algorithm is correct all of the time. Ball speed and spin readings were almost identical, so I’m not sure how quad can be superior in every metric.
@@SydneyGolfTech this isn’t a criticism of you as a content creator..
But the GC quad IS industry standard. This isn’t an anecdotal statement this is industry wide. As one of the few fitters in Syd who use GC I think you’re doing yourself a disservice suggesting that TM is an equal product to GC.
Because the fact that you do use GC separates you from club champion (formerly Pureform) because they use TM and things like spin rates peak heights, carry distance make all the difference to club fits and GC is more accurate.
@@jakedavid4304 I’m always open to discussion and I do use quad in my fittings and will continue to do so. What’s really interesting is that the vast majority of tour players use their quad without any dots which says they are looking at ball data.
@@SydneyGolfTech the club face dots are only two Oriente and calibrate the camera to accurately locate the ball strike position on the club face… On any given day, the player isn’t going to be worrying about where the balls hitting the club face more so the averages of all speed, spin rate, carry, and total distance given the conditions of each days play which will tell them what clubs they need to hit from what distance given the conditions etc. Most players would have a pretty typical ball striking position anyway and are good enough to know that if they strike the ball a little bit lower on the face. It’s going to spin more if they strike the ball a little bit higher on the iron face it might not travel as far because the spin rate might be lower for irons, in the toe equals more draw shape and in the heel is a fade.. they don’t need club dots to tell them where they hit the ball that information isn’t needed in the range session before a tee time etc…
@@jakedavid4304 TM is definitely an equal product to GC overall. They both are superior to each other in its own ways. Quad is better for club data + indoor usage for sure but quite inaccurate in terms of calculating carry/total distances especially for longer clubs/higher speed guys. Trackman definitely dominates in this area as it actually follows the ball - which gives it a much bigger advantage on ball data + outdoor usage.
I'd say that Quad is "industry standard" due to the fact that it has easier setup, gives accurate club data when necessary and the built in screen is just convenient for immediate feedback during range practice. This is an objective view - disregarding all financial partnerships that might be going on behind the scenes.
Ball data wise - I'd take it from TM any day if I'm outdoors. I've personally seen guys with 180-ish ball speed going 400 yards on quad because they could launch it high (>17 deg) with like 1200 spin @ sea level. Let's not even debate whether this is actually accurate😂
A better comparison for indoor performance would be using the Titlest RCT balls. I almost never have any italicized spin rate any more after switching to RCT and the spin has been within 100 rpm different between trackman and GC.
Did you watch the whole video or tune out early? RCT is in the video.