Boy, now that brings back memories. The only heat we had on the tractor. It was on the model H we had. I was small enough to raise the seat and close the back and sit on the floor, worked ok. Thanks for the memories 😊
Great video bud!! The 460 with the heat houser brought back memories for me! Same rig we had on the dairy, dads had a wide front. Be safe, keep the video coming! Just subbed ya.
Those heat housers were the trick on cold windy days. Spent a lot of hours on 966 1466 and 1566 tractors. All had them. The 15 was turned up some so the exhaust manifold would get pretty hot. We would wrap a piece of heavy canvas underneath the engine for full effect. Poor mans cab...
Those bedding shooters sure are nice. We have a couple of cracks in the windshield of the heat houser for the 450 too and did the clear tape thing as well. That new cab sure looks like a nice upgrade.👍🍻🍻🍻🍻
Definitely liking the new cab. Hopefully I'll get it sealed up a bit better. Would be nice to get the heat working but I doubt I'll ever get around to it. Thanks for watching 🍻🍻🍻🍻
That's for sure. And when you open up the doors and windows in the summer it's pretty damn nice too especially if there's a good breeze. Thanks for watching 🍻
I have a few places the ol Case just fits under... Also it's just shot enough to work in the calf barn.. if we ever get the Cat skid steer going, it's a little over a foot longer... Be a bit tight in a few places... I plan to at least put a heater in it, if I can get the parts, AC too.. and enclose it That wet snow is what we get.. it's a beyoche', but better than the mud!! Actually mixes well with the mud, makes it easier to manage. Cab looks better than the other one 👍 top lights are nice.. even with the platform and grill lights..
Heat in the skid steer sure is nice 👌 that wet snow friggin sucks lol, it's good and froze now. Headed into the deep freeze for a bit, lots of wind and possibly a snow storm🤬. I really like those top lights on the back of the cab, might have to do the front too one of these days 🍻🍻🍻🍻🍻
@@hartungdairyfarm0713 lights are always a good thing!! We're on the wrong side of the Cascades to get in on your deep freeze.. only supposed to be 20 or so... Stay warm!!!
That's a good idea to use carpet. I see those cab kits are pretty pricey. Yep found the door latches, hopefully they'll be here In a few days. Thanks for the info 👍
Man you have had it rough with that weather!! We don't have anything like y'all,but I tell ya....when the mud season comes I hate it!! Almost got stuck in the service truck in the bottom today!! I bet an air pressure change could drastically effect that 1" of clearance too🤦🤦😳😳 That cab swap was amazing!! I bet those closer tolerances sure make things better!! Did he say why he didn't want the cab on the 966? That seems strange, but maybe not there 🤔 Man that snow was getting deep, and aggravating there towards the end!! Btw, I love the sand box for sure!! I sure hope you got those ruts before the froze over completely!! Thank you sir for bringing us along, looking fwd to seeing what's next!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸🍻🍻🍻🍻
Ahh this weather has gotten old🤬. Now it's good and cold and going to get windy with a potential blizzard 🤯🤯. I'm definitely happy with the different cab, guy that bought my 966 is a retired farmer just had a few tractors he collects and plays around on in the summer. Got some of the ruts taken care of but it's still plenty ruff , guess it won't be if we get a blizzard 🤷♂️🤣🤣. Thank you sir hopefully I can catch your last video in a day or two 🤞take care 🍻🍻🍻🍻🍻
Shitty weather, shit getting deep! Good times?🤬🤣 Nice job on the cab swap! Looks like it was a nice cab!👍 The never ending battle of💩! Don't go having your self to much fun in this deep-freeze!🤦🏻♂️🤣😂👍🍻🍻🍻🍻 Remember to keep your mouth shut while going over them ruts?🤣😂🍻🍻
Nice👌 I would like to find a factory cab for my 826. They had isolation bushings to help with noise. They were quite compared to the aftermarket cabs. Let me know if you see one.
The 756 kinda looked like a Ertl toy tractor without the windows, my cousin has a 1962 JD 4010 that he restored, it used to have a cab on it, thanks for sharing this video Matt 👍🚜🐄 I almost forgot to mention that it's a marshmallow world here in Minnesota ❄️☃️🥶
I do like those old year round cabs. It's going to get nasty cold and possibly blizzard conditions in a day or so 🤬. Should be fun lol. Thanks for watching
Candy is working very good. But the place I was getting it from apparently is going to shut down. Not sure if I'll be able to get anymore or not. Go figure 🤦♂️🤬🤣
i have to remind myself that there are places where heat is something you can actually use, not something you have to get rid of. Never saw that strange tractor heat deflecting setup before. Then again never had to deal with snow or ice that did not come from a freezer.
I'd like to get the heat working, the blower doesn't work at the moment. It used to so I'm assuming just a wiring issue. The cable that you pull for the heat is froze up too. I'll have to do some playing with it one of these days. Thanks for watching
Candy meal is feeding really nice and I'm saving some money on corn. Downside is the place I was getting it from is going to shut down, I'm not sure if I'll be able to get anymore or not
Video of those cows milking looks like 1st or 2nd calf cows they really nice udder on those 🐄 cows 65 to 85 pounds of milk I see in pass Video you chew tabocco what kind and if you go to store and get a tape measure holder for 16 in tape measure your can of chew will fix it know more can falling out of pocket or hold in pocket in pants I started back in middle 80s because chew can os skoal or Copenhagen were cardboard and metal lids lol lol 🍻🍻🍻🍻
Thanks 👍. I've had really good luck the past couple years with heifers. I'm a Copenhagen fan, that's a good idea with a tape measure holder, be a lot better than wearing holes in the pockets lol. Thanks for watching
Boy, now that brings back memories. The only heat we had on the tractor. It was on the model H we had. I was small enough to raise the seat and close the back and sit on the floor, worked ok. Thanks for the memories 😊
That's cool, thanks for watching
Watching you from Derry in Ireland
Thanks for watching 👍
@@hartungdairyfarm0713 Have u ever been to Ireland
Like the video on the farm and on the 766 IH changing the cab .it look much nicer .
Thanks for watching
Merry Christmas 🎄☃️ and happy new year
Merry Christmas to you too. Thanks for watching
Wow. I caught this one early. 👍🙂
Right behind you.. had to get out of the shower
Great video bud!! The 460 with the heat houser brought back memories for me! Same rig we had on the dairy, dads had a wide front. Be safe, keep the video coming! Just subbed ya.
Those ol 460 and 560 tractors are hard to beat. Thanks for watching
Those heat housers were the trick on cold windy days. Spent a lot of hours on 966 1466 and 1566 tractors. All had them. The 15 was turned up some so the exhaust manifold would get pretty hot. We would wrap a piece of heavy canvas underneath the engine for full effect. Poor mans cab...
I sure like those heat housers. I bet a canvas underneath would make it a lot nicer 👌 . Thanks for watching
Those bedding shooters sure are nice. We have a couple of cracks in the windshield of the heat houser for the 450 too and did the clear tape thing as well. That new cab sure looks like a nice upgrade.👍🍻🍻🍻🍻
Definitely liking the new cab. Hopefully I'll get it sealed up a bit better. Would be nice to get the heat working but I doubt I'll ever get around to it. Thanks for watching 🍻🍻🍻🍻
Different scale operations I don't have a lota stress to deal with
That's a industrial farm IT JUST AINT THE SAME as what I do
People can say whatever they want about those cabs, but it damn sure beats being out in the elements.
That's for sure. And when you open up the doors and windows in the summer it's pretty damn nice too especially if there's a good breeze. Thanks for watching 🍻
Merry Christmas to you and your family
Thanks. Merry Christmas to you and yours too
If you have a tall enough shed we use to put a umbrella on top so if it rained you could stay dry also in the winter
That's a good idea. They way the wind has been blowing lately it might carry me away though lol. Thanks for watching
@@hartungdairyfarm0713 we always tied down the corners with some baler twine to something
First time watching, where do you farm at?
@@tederdmann2993 sw Wisconsin. Thanks for watching
I'm out of NE.Wis.
I have a heat houser for a 1066. Haven’t had it on in a few years. They help!
They sure do. Especially driving into the wind. Thanks for watching
@@hartungdairyfarm0713 you bet!!
I think my dad had one of those for a 60 john deere. And I think my uncle had one for a super h international
They sure make a big difference. Especially keeping you out of the wind. Thanks for watching
Love your videos, Mr. Hartung. Wanna buy my '55 400?
That's tempting, those are good ol tractors
It’s located in Sherrill, IA. Strong runner, tight fast hitch, great rubber. I’m only selling because I’m (currently) living in California.
I have a few places the ol Case just fits under... Also it's just shot enough to work in the calf barn.. if we ever get the Cat skid steer going, it's a little over a foot longer... Be a bit tight in a few places... I plan to at least put a heater in it, if I can get the parts, AC too.. and enclose it
That wet snow is what we get.. it's a beyoche', but better than the mud!! Actually mixes well with the mud, makes it easier to manage.
Cab looks better than the other one 👍 top lights are nice.. even with the platform and grill lights..
Heat in the skid steer sure is nice 👌 that wet snow friggin sucks lol, it's good and froze now. Headed into the deep freeze for a bit, lots of wind and possibly a snow storm🤬. I really like those top lights on the back of the cab, might have to do the front too one of these days 🍻🍻🍻🍻🍻
@@hartungdairyfarm0713 lights are always a good thing!!
We're on the wrong side of the Cascades to get in on your deep freeze.. only supposed to be 20 or so... Stay warm!!!
Interesting video, them old IHs must be very good tractors, see loads of them on american farms in the videos.
Thanks 👍. Yep those old IH's are a great tractor. Thanks for watching
Carpet on the fenders in the cab works well and cheap! Hope you found that door handle!!
That's a good idea to use carpet. I see those cab kits are pretty pricey. Yep found the door latches, hopefully they'll be here In a few days. Thanks for the info 👍
@@hartungdairyfarm0713 not problem, your welcome!
Man you have had it rough with that weather!! We don't have anything like y'all,but I tell ya....when the mud season comes I hate it!! Almost got stuck in the service truck in the bottom today!! I bet an air pressure change could drastically effect that 1" of clearance too🤦🤦😳😳 That cab swap was amazing!! I bet those closer tolerances sure make things better!! Did he say why he didn't want the cab on the 966? That seems strange, but maybe not there 🤔 Man that snow was getting deep, and aggravating there towards the end!! Btw, I love the sand box for sure!! I sure hope you got those ruts before the froze over completely!! Thank you sir for bringing us along, looking fwd to seeing what's next!! 😁😁👍👍👍🇺🇸🇺🇸🇺🇸🍻🍻🍻🍻
Ahh this weather has gotten old🤬. Now it's good and cold and going to get windy with a potential blizzard 🤯🤯. I'm definitely happy with the different cab, guy that bought my 966 is a retired farmer just had a few tractors he collects and plays around on in the summer. Got some of the ruts taken care of but it's still plenty ruff , guess it won't be if we get a blizzard 🤷♂️🤣🤣. Thank you sir hopefully I can catch your last video in a day or two 🤞take care 🍻🍻🍻🍻🍻
Shitty weather, shit getting deep! Good times?🤬🤣 Nice job on the cab swap! Looks like it was a nice cab!👍 The never ending battle of💩! Don't go having your self to much fun in this deep-freeze!🤦🏻♂️🤣😂👍🍻🍻🍻🍻 Remember to keep your mouth shut while going over them ruts?🤣😂🍻🍻
💩 will be piled high when this weather breaks 🤬🤣🤣🤣🍻🍻🍻🍻🍻
@@hartungdairyfarm0713 definitely!
Nice👌 I would like to find a factory cab for my 826. They had isolation bushings to help with noise. They were quite compared to the aftermarket cabs. Let me know if you see one.
I bet that 826 is a cold ride 🥶🥶🤣🤣🤣. If I happen to see one I'll let you know 👍🍻🍻🍻
The 756 kinda looked like a Ertl toy tractor without the windows, my cousin has a 1962 JD 4010 that he restored, it used to have a cab on it, thanks for sharing this video Matt 👍🚜🐄 I almost forgot to mention that it's a marshmallow world here in Minnesota ❄️☃️🥶
I do like those old year round cabs. It's going to get nasty cold and possibly blizzard conditions in a day or so 🤬. Should be fun lol. Thanks for watching
I was starting to think you went to Florida for the winter. 😆😆
I'm hoping it freezes up some this week so I can move some 💩
Boy I'd like to 🤣🤣. It's going to be damb miserable In a couple days. Good luck with your 💩 hauling
How did the candy work for you in your feed?
Candy is working very good. But the place I was getting it from apparently is going to shut down. Not sure if I'll be able to get anymore or not. Go figure 🤦♂️🤬🤣
i have to remind myself that there are places where heat is something you can actually use, not something you have to get rid of. Never saw that strange tractor heat deflecting setup before. Then again never had to deal with snow or ice that did not come from a freezer.
Lol I'd be much happier not having a cold season. -10 tomorrow night 🥶🥶. Thanks for watching
Nice cab swap there. Good for spreading 💩 in this weather. Good lights sure are nice.
Glad to have it on there👍. Wish I had some heat in there but it's way better than what I had 👍👍
I think I used the same tractor seat, mowing on an old massy
Lol you get used to it after awhile 🤣
@@hartungdairyfarm0713 enough feed sacks it is pretty comfortable
Careful with the radio.. YT will have a 💩fit🤣😂
Didn’t realize how tough the old cab was until you set the new one on 😂Any chance of getting the heater working in the cab?
I'd like to get the heat working, the blower doesn't work at the moment. It used to so I'm assuming just a wiring issue. The cable that you pull for the heat is froze up too. I'll have to do some playing with it one of these days. Thanks for watching
Sand is good for bedding, but there will be a lot of sand in the manure pit.
Yeah it sucks having all the sand in the pit, usually in the summer I try to use lime so at least that's good for the fields. Thanks for watching
I've been wondering how did that candy meal work out? Never heard anything more about it
Candy meal is feeding really nice and I'm saving some money on corn. Downside is the place I was getting it from is going to shut down, I'm not sure if I'll be able to get anymore or not
What are you using as a brisket board
I think it's a 2x10 . Thanks for watching
Video of those cows milking looks like 1st or 2nd calf cows they really nice udder on those 🐄 cows 65 to 85 pounds of milk I see in pass Video you chew tabocco what kind and if you go to store and get a tape measure holder for 16 in tape measure your can of chew will fix it know more can falling out of pocket or hold in pocket in pants I started back in middle 80s because chew can os skoal or Copenhagen were cardboard and metal lids lol lol 🍻🍻🍻🍻
Thanks 👍. I've had really good luck the past couple years with heifers. I'm a Copenhagen fan, that's a good idea with a tape measure holder, be a lot better than wearing holes in the pockets lol. Thanks for watching
Clear gorilla tape and that will last longer than the rest of the cab
I didn't know gorilla tape made clear stuff. I'll have to try that if my ag bag tape falls off. Thanks for watching