Is the winch a Warn evo10s? Your phone support told me the trd pro hybrid will need a solenoid relocate with that winch - looks like in this video not needed or did you just not cover that part in the video? Just trying to figure out what I'll be up against
Thanks! These bumpers won't fit the sequoia but we have a full line of bumpers, rock sliders, and skids that do so check them out on the website! cbioffroadfab.com/product-category/sequoia/
@@CBIOFFROADFAB got my bumper. Had some issues with initial install (fit n finish stuff - probably user error lol), but hardware shipped slightly wrong. Who can I contact for help?
Totally ignorant to kitting out vehicles / trucks etc. wondering are they actually piloting into the roof of the truck? Is there a warranty void / rust implications there? Assuming there’s proper seals that come with the rack? Cheers
check out our install video on our @cbiprinsuinstalls page or our install guides on our website. They'll cover what sealant we recommend which is the exact same that is recommended and used by Toyota. Drilling into the roof of the vehicle is a commitment but hopefully those resources make it easier.
I like the way you designed that back bumper. Mine come damaged from the production process/factory. After only a week left side screw underneath cracked, making that left side loose. Not sure if it was tighten too much or what happened but this could be Toyota design flaw too. How much will it cost to buy and install that back bumper.
So it is safe to wire up all the aux lighting on the front Fuse box (jump points) on the hybrid models? I always thought a separate power wire had to be run from the battery. Did you wire the winch power to the battery? Thanks!
Amazing work? Why? It’s simple plug and play other than drilling holes in the roof ouch!!!!! Merger ever ever ever ever drill holes in your truck roof …. Like EVER !
Toyota knows less about their truck demographics than Bud Light does theirs. Plastic bumpers, electronics out the butt to break, rusting flexible frames ...
That's a good lookin build!
"This will take 2.5 days, 3 days if I really suck" 🤣 You guys make the best videos!! Keep up the great work. Your Tundra stuff looks incredible!!
Thanks! It took 3 days 😂
This video was perfect. You guys didn't waste time excessively talking about the build yet showed each part of it. Nice and simple.
Appreciate this comment 🙌 its short and straight to the point but takes a lot of planning to get it that way!
This tundra is SWEET!!! Front and rear bumpers are the best addition to the new tundras.
Daddy Justin killed it as always #TeamJP
Is the winch a Warn evo10s? Your phone support told me the trd pro hybrid will need a solenoid relocate with that winch - looks like in this video not needed or did you just not cover that part in the video? Just trying to figure out what I'll be up against
the warn evo 10s should fit just fine. Pretty much any other brand or model besides that will need the solenoid to be relocated.
What size/brand tires and lift?
Any videos of installing the non-Overland Rock-sliders?
Such a nice build. Would these bumpers fit the sequoia?
Thanks! These bumpers won't fit the sequoia but we have a full line of bumpers, rock sliders, and skids that do so check them out on the website! cbioffroadfab.com/product-category/sequoia/
Great upgrade, what is the specification on rims and tire?
Very nice! Need to outfit my 22 now
Do you have a price break down of parts of labor to help get an idea of where the $15k went?
Best looking with all cbi ⚡️⚡️⚡️
Love this for the front and ordered it! Not a fan of the rear, but see the advantages for over landing. You guys make cool sh*t. Nice job.
Thanks for the support man! When you get that installed, send us a picture to our Instagram!
@@CBIOFFROADFAB got my bumper. Had some issues with initial install (fit n finish stuff - probably user error lol), but hardware shipped slightly wrong. Who can I contact for help?
Do you recommend my one for installation in California?
Yes! Visit our location in Riverside, CA for an installation quote. Reach out to our team and we can get you a quote!
What lift and tires??
Do you have installation facilities in socal?
Do you have a slower walk around of this truck once finished?
Any regearing needed with all this added meat?
We didn’t do any on this build but it’s definitely not a bad idea
Hello waht is teh seize of the tires on this tundra?
I believe they’re 35’s
What size tires and lift were on this truck?
Totally ignorant to kitting out vehicles / trucks etc. wondering are they actually piloting into the roof of the truck? Is there a warranty void / rust implications there? Assuming there’s proper seals that come with the rack? Cheers
check out our install video on our @cbiprinsuinstalls page or our install guides on our website. They'll cover what sealant we recommend which is the exact same that is recommended and used by Toyota. Drilling into the roof of the vehicle is a commitment but hopefully those resources make it easier.
I like the way you designed that back bumper. Mine come damaged from the production process/factory. After only a week left side screw underneath cracked, making that left side loose. Not sure if it was tighten too much or what happened but this could be Toyota design flaw too. How much will it cost to buy and install that back bumper.
So it is safe to wire up all the aux lighting on the front Fuse box (jump points) on the hybrid models? I always thought a separate power wire had to be run from the battery. Did you wire the winch power to the battery? Thanks!
We traced the battery main power to the fuse box and ran our winch and spod off of that terminal.
I like the bumpers .I am not a fan of putting holes in the roof of any vehicle but looks very good
Definitely not idea for resell but its definitely the most secure
Very sweet looking truck. Do you know what lift is on it?
Westcott 2”
What city you guys in? Amazing work!
Idaho falls
Amazing work? Why? It’s simple plug and play other than drilling holes in the roof ouch!!!!! Merger ever ever ever ever drill holes in your truck roof …. Like EVER !
Very nice. I have my 1794 TRD Off Road on order. You will be my first stop. BTW what size KM3s. 35 or 37?
Thanks for the support! They’re 37’s but run a little smaller than that.
Can't wait to see your silverado zr2 build. Subbed just for that
Got a ways to go but it's going to be worth it!
Freakin awesome. Drool drool
Can you do this to my 2017 Toyota TRD PRO, I need that setup, I love snow and just getting off the road ❤. Let me know.
Man this truck looks mean you guys did a great job
It’s a good one!
very nice !!
Sweet build 👍🏼
Coming to a mall parking lot near you
Great looking truck.
all that - with tires - 15 K ?
3.6MPG
All about the gallons per mile
What wheels are those?
Which offset is really my question...
Cbi I need a bumper for a 2021 gmc Sierra 3.0L 😂
What lift is that?
Westcott 2”
Does it squat a lot with that weight in the back?
Yeah it was sagging a bit. It will probably be really noticeable after adding the rooftop tent and extra weight.
The 15000 must have been mostly labor charge
Justin isn't cheap
Sick build. Wish I could’ve kept my 22 TRD Pro. Just couldn’t live with the awful turning radius as my daily driver.
Can't blame you but yeah it's a nice rig after everything is put on
What made the radius so bad, been looking at the 23 Tundra trd pro and all i hear are poor reviews.
It’s a big truck ! Want turning radius get a mini cooper
Niiiiiiiice
Hello, i'm from Russia. Why you not use RAM? only toyota
We've got a lot of toyota but have also expanded to other mid sized vehicles. We're hoping to further expand into full size trucks in the near future.
Is it just me or is everyone else burnt out on the lunar rock color ??
Bye2 warranty.
Most people dont overland they are posers and like the look
Not enough power
15k for all of that without tackling suspension and/or tires upgrade? Hmmn
The tires and suspension were taken care of before this truck got to our shop but they are included in the 15k estimate
@@CBIOFFROADFAB i see. What upgrades did you do to suspension and tires?
you lost me at drilling the roof
Uhmmmm no ….. drilling holes in my roof is an absolute no.
Looks good, but it still sounds like a dinky little RAV4 when you start the engine!
Better start bulldozing trails before taking this elephant down singletracks😅
Toyota knows less about their truck demographics than Bud Light does theirs. Plastic bumpers, electronics out the butt to break, rusting flexible frames ...
They just have a bigger audience to appeal to. Luckily for us we just have to focus on one audience with our products
Sorry guys, but I don’t like the new tundra. It looks ugly to me.
Too much going on
Sorry guys but the first deep river and your hybrid car will die. And making an SUV without the ability to drive into the water is stupid.
Terrible. You're already spending crazy amount on this truck just to bring it to what the other manufactures are already doing. Waste of money IMO
Don’t lie. Name one that builds this exact vehicle.
@@Contest4Freedom Dodge 2500 Power Wagon ,there that’s 1. Winch and all 😝.
And they break down and die before a Toyota
Name a more reliable gas truck other than Toyota? I’ll Waite lol
Why are you so concerned what OTHER people do with THEIR money? Who cares, just enjoy the video.
Not bad for a turd pro 😂😂😂
🤮 tundra
Just those things were $15,000!..
There were a few things we didn’t install but are definitely aftermarket items that attribute to the price. It was an estimate
Cool video, good job on making it look better... but man I hate this new tundra...
@maxxpowell
what suspension is on this truck?
Just the fox suspension that the trd pros come with
@@CBIOFFROADFAB I have an identical trd pro with westcott kit, looks like this one sits higher. Probably just the wheels