Well, just to let everyone know. The engine noise was caused by whoever had the Vette apart last time. The valve covers were installed upside down on the wrong sides! The taper on the inside is wrong, causing the rockers to periodically touch, causing the intermittent noise! All switched, and all good now.
Someone in my family had a 70’s Chevelle. It over heated so the mechanic told them “sorry you blew the engine” cause there was fluid on the ground. She didn’t know any better. So he bought the car from her for 500 bucks in 1980. It didn’t have a scratch on it. Unfortunately there were a lot of dirtbags out there. Just like heater core guy.
Rustolium makes a spray product called ‘rust reformer ‘ for rusty metal. I know it works as long as the painted surface stays dry. If the leak is fixed that product should be ideal for spots Ike your firewall.
I had the same exact thing happen to me except mine was a different kind of rig. From what I heard, she got ran out of state by 2 different towns and counties as well as the state. Her and her accomplice supposedly lost everything they both had and had to go bk to mom and daddys and restart their lives from scratch.
Who needs to give flowers and chocolates for Mother’s Day ?! New shocks and heater core will forever keep your place as favourite child 😂 Another fine presentation from PBG👍🏼🇬🇧
I just lost my dad to cancer, he's the reason I'm into old junk. Make sure to spend as much time with parents as ya can. Never know when they're not gonna be there.
I'm guessing the vette's trailing arms and truss rods need a little love....the Achille's heels for sure! LOVE yer mom, too! Fun vid, brother!!! A+++++
Dalton, have never seen you this gentle on any automobile. Your Mom must be a special lady. I’m glad she was not around when you started cutting wires. Actually a super job. Thank you for sharing. ❤️💯👍👊
im in manchester uk. we dont have the same animals in our forests over here. the noises of coyotes? frogs? crickets? and sasquatches? in your videos are really good. please always leave the garage door open so we can hear them. thank you very kindly sir
Just a note on the syringe, you can take it right out and pour your liquid in and then pressurize it to put the liquid into whatever you want. Easier than trying to pick the liquid up
JD has gotta be the luckiest kid around to have such a great dad and teacher! I used to work like that with my dad but he had NO patience 😂😂😂 I still have flashlight trauma!!!
My 94 suburban, the previous owner took it to a shop for a heater core, was about the same quote, I changed it in 10 minutes. Sometimes I think shops hear heater core and think all vehicle's it requires the dash to be taken out.
A lot has to do with proper footwear. I’m not sure those cars perform as well unless you’re wearing New Balance sneakers, tall socks, khaki shorts and a button up shirt with pictures of Corvette’s on them 🤷♂️
Bonus point Years ago we had a auto parts store, called nationwide auto parts. They sell it foil tape in auto body department body repair. This was in the 80s
As parents, we often don’t realize just how much our own kids are learning and growing (because we see them all the time, so like watching a flower grow, if you watch it all day, you don’t see it blossom - but if you only saw it once or twice a week, you’d notice it). So I wonder if you see just how much your son is learning and growing. He’s an impressive young man. He is clearly picking up what you are putting down!
Ahh square body life. One of the first repairs I did myself at 17 was a heater core on the hand me down ‘86 K20. And if I remember correctly it was a two piece heater box requiring an arm through each side to thread the tiny bolts out of the blend door rods all by feel. Next job was a leaking fuel tank due to those lousy plastic shields trapping dirt and water.
Hey PBG I just wanted to say that I saw you in one of junkyard digs videos a while ago and ever since then my dad and I watch you every time you upload. Thanks for all the laughs and please keep up the great work!
I so, so, so much want one of those K5's!!! I love the look and stance, it's meeeeean! That one really looks good, lucky your mom has you to take care of her ❤
Man that ole k5 is sweet also just watched the outside the barn video slab turned out nice can’t wait to see the new building and all the other good stuff from PBG
I really like your Mom's K5. The engine swap was the first PBG episode i watched, and that lead to the binge and therefore a subsequent subscription and eventually a membership. The Vette isn't bad after the Crossfire delete. If you were driving without New Balance and the Members Only jacket, that could cause the problem you were having. I like the 2 vehicle special episode format 👌🏻
So I learned this lesson with my dad. It's not that the fuel pump is bad out of the box. It's that a fuel system that has a return line. That's how it creates an equilibrium. Otherwise it's just gonna suck on the tank until it can't suck anymore. And that's when it breaks the webos inside the pump. And that's when the hole spits out. Because that's what prevents the fuel from leaking into your oil and ruining your engine. The only thing you can do is either drill.A hole in your gas cap like we did or you can put a vented fuel cap.On if they are available or run a pump with a return
@@salty-9 Nice, that 460 might like it. Cooler fuel gives you better fuel efficiency. A cam intake and some aluminum heads with a carb and headers would really make it happy 🤘😎🤘
BMW's are great, those shops soak those owners like crazy. I've made money on 6 of em. "Mechanics special,, blown head gasket". Quik look and it's water pump. $80 pump and I just made the special tool needed from a piece of flat bar. Flip the car for a tidy $2k profit.
Basic maintenance - and that includes diagnosis of a water pump over a head gasket - should be required knowledge to get your high school diploma, that and the same qualifying test the police take twice a year, that should be in curriculum as well if you're going to provide knowledge basically forced into children's minds, might as well be useful knowledge.
@@RustyZipper there’s a problem with that statement there zipper I deliver the food I got a reefer on my back 24-7 I ain’t hauled for Amazon in quite awhile but I appreciate it you have a great day
@@michigander_truckerrides985 - thanks for bringing me my food then! Lord knows I could do with less but that’s the American way! 🫃 I really wish all you truckers would go on strike for just one day a week and make more folks appreciate all the sacrifices you drivers make!
The heater core replacement brings back some good memories of my High School car a 89 Chevrolet Corsica. When my heater core went out and started to pump out white smoke in the car. It was pouring antifreeze on the passenger side floor. After I got it fixed I used my Mother's brand new carpet cleaner. Man she wasn't happy about that. Lol 🤣😆🤣 good times.
I watch this channel regularly because you’re relatable, entertaining and I usually get a few laughs every video. Thanks for being a true “everyday guy”
Great video Dalton! One of these days it would be cool to meet you and the crew. Hell, I feel like I already know your entire family. Keep it up, best on the tube!!
I put a cheap fuel pump in my square. It lasted about 3 months. I put a Napa gold pump in after that. It’s good so far. . That return line helps it not vapor lock in the summer. But you already know that.
Mom's lucky to have a aww especially awesome son to keep the fleet happy and healthy. Great job and dedication to the family Dalton. Have a great weekend.
YES. my kind of hero. HOT DOG DOWN A HALLWAY. I tell people that all the time. 😂😂😂 but yes i agree with you on shops. This is why i work on my own stuff. Can't trust people anymore.
😂 when you asked JD if he knew what a clock was. 💯 valid question as I have asked my kids to tell me what time is on the clock and it takes them a little while to figure it out 😅
Mom's 78 K5 is a peach! I had a 79 a Wyoming truck very clean loved it should have kept it. Had the SilverRayDo trim level PW/PDL/CC/A/C Am/FM 8 track Power Rear Window, Rally Wheels, 350, TH400, NP203 3.73 and a locking Diff. That truck was awesome! Long Live the Self Tapper King!
Those project farm tests are frickin excellent. The science is sound, and his recommendations are solid. He also got me switched to cheap bar oil. Just hope the price doesn't creep up(it already went up in proce on Amazon, probably because they were flooded with thousands of orders now that his video came out. The Cletus McFarland crown vic effect.
Oh and any time you have a bolt stuck in a sleeve......if a ball joint clamp is available, and fits.....it always does a great job pushing stuck bolts out of leaf spring bushings....or shock bushings.
I had a 70 Z28 Camero with the LT1 350 360 Hp and it had a valve train noise similar, Rebuilt the engine with All new parts double roller timing chain and all new Cam and lifters ,long story short that same noise was still there ,nothing was over looked and everything was measured twice and was in spec ran the car like that for years zero problems .
That's funny how you guys feel the same way I do that's what makes your videos so entertaining!! And that you are still working outside your small garage.. and continue to work a full-time job so down to earth!
@@davidbryant5875Damn that guy for not wanting to be broke the rest of his life and how dare he work his ass off to get to where he is. I’m sure PBG is looking forward to the day that his hard work begins to pay off for him and his family. Then y’all can bitch about him selling out.😂
Bloody hell, the dumdum! When I was younger I worked in a spray paint shop in Dunedin New Zealand we sent the boy to the suppliers for a can of dumdum. He thought we were joking, so he buggered off to the beach.
Torque converter bolts.. on transmission … it’s sounds lower end but not real bad like a soft knock and will echo off everything cause it’s connected to the crank shaft wich has everything close proximity… sounds like almost everything !!!
@@PoleBarnGarage well thank you for letting me know you read my message when you find out and if it is .. I appreciate if you let me know or give a shout out when you’re filming again or do a video on it and repair it .. I’m curious about it myself .. from what I heard in video it didn’t get louder that I heard and it sure sounded like loose converter bolts .. and if the same person serviced that transmission like they serviced the shocks on that blazer lol I could see it being loose converter bolts probly no lock tight on them or not torqued to specs… lol thanks dalton looking forward to more cool content .. lol how’s that king cobra doing !!! Ok ttyl ✌️ 🤙🤜🤛🤙🤙🤘🤘‼️‼️💯💯
I learned the 'stethoscope' trick from my granddad. He would use a long screwdriver and listen to the handle. On rockers, with covers off and engine running, he would hold a hammer by the head and 'feel' the rockers with the handle. Great channel!
Heartwarming to see you and your 'right hand man' always together helping each other. You have a wonderful family, though I suspect, you already knew that! God bless you my friend and have a great day! 😁
Well, just to let everyone know. The engine noise was caused by whoever had the Vette apart last time. The valve covers were installed upside down on the wrong sides! The taper on the inside is wrong, causing the rockers to periodically touch, causing the intermittent noise! All switched, and all good now.
Awesome find! Great job
This happened on Puddin's channel as well during his wagon build
Someone wasn't paying attention! Glad you got it sussed out and fixed on the cheap.
lmao, now that is worth every ounce of red rtv
@@Maakyuhlinsky I like to see fellow fans of puddin in other videos 😂
Someone in my family had a 70’s Chevelle. It over heated so the mechanic told them “sorry you blew the engine” cause there was fluid on the ground. She didn’t know any better. So he bought the car from her for 500 bucks in 1980. It didn’t have a scratch on it. Unfortunately there were a lot of dirtbags out there. Just like heater core guy.
Rustolium makes a spray product called ‘rust reformer ‘ for rusty metal. I know it works as long as the painted surface stays dry. If the leak is fixed that product should be ideal for spots Ike your firewall.
Maybe about a $1000@@nosgaslaugher1813
I had the same exact thing happen to me except mine was a different kind of rig. From what I heard, she got ran out of state by 2 different towns and counties as well as the state. Her and her accomplice supposedly lost everything they both had and had to go bk to mom and daddys and restart their lives from scratch.
U could buy a good car or truck for $500 in 1980
@@darrylowens9298I've used that before it works pretty good
My dad had a Blazer like that. One time I rolled the rear window down. Never have I been sworn at with such gusto.
Wow everything from the Mongols to Jimmy Carter. I love history lessons with Dalton 😂
Both should be feared
Actually now that I think of it, the clean air act was passed under Nixon wasn't it?
New sign for the new shop: Specializing in Crossfire Conversions
@@PoleBarnGarage EPA was created under Nixon in 1971.
Love the randomness under this comment lol
Love your mom, any woman that drives a K5 as a daily is gold, take care of her sir.
I know, right? My has no respect for anything that isn't 2023 or newer.
She sounds like my mom, who just had us find her a third 2001 BMW 7 series. She loves that model car and doesn't want anything newer.
@@johnpearson492That year E38 is the pinnacle of excellence, she has great taste!
@@justinwise6950 Undoubtedly, the e38 is perfection in the blend of style, sportiness, luxury, and quality.
Probably the greatest truth I've ever witnessed being told, "It's not about the length, but the angle"... Preach it, brother...
Yeah keep telling yourself that.
Yeah, I’ve heard my girlfriend tell her husband that several times too 🫠
@@RustyZipper Three words you don’t want to hear after a good night of love making,honey I’m home!
Who needs to give flowers and chocolates for Mother’s Day ?!
New shocks and heater core will forever keep your place as favourite child 😂
Another fine presentation from PBG👍🏼🇬🇧
If you don’t have a shirt that says something about a self tapper that’d be a money maker I bet!
'self tapers and paint make the mechanic I ain't'
I would buy a pbg shirt that says 'Will work for self tappers'
I just lost my dad to cancer, he's the reason I'm into old junk. Make sure to spend as much time with parents as ya can. Never know when they're not gonna be there.
I'm sorry to hear that bud
Hadn't heard the ole hot dog in the hallway effect in a while. Thanks for the video today, that was hilarious 😂
So many scenarios run through a man’s head.
When a hole gets wallered out from use over the years they’re hard to get back tight again without upgrading hardware
@@RustyZipper such a wise man…..
A guy I worked with when I was 18 used to say it’s like banging a hockey stick around inside a culvert.
Dalton, you are a mechanical comedian. You got a good family right there!
I'm guessing the vette's trailing arms and truss rods need a little love....the Achille's heels for sure! LOVE yer mom, too! Fun vid, brother!!! A+++++
I agree! Some bushings and spring links would do it wonders as well
I've heard that knock before and torque converter bolts was 1st thing that came to mind
My mother’s ‘84 Caprice did that. We thought for sure the engine was shot but just them TC bolts loosened up.
Feel around on the bottom of the bell housing. Had a tahoe back off a torque converter bolt and was hitting the inspection plate ever so slightly.
Dalton, have never seen you this gentle on any automobile. Your Mom must be a special lady. I’m glad she was not around when you started cutting wires. Actually a super job. Thank you for sharing.
❤️💯👍👊
Watching you do the heater core on that blazer makes me glad my squarebody is a factory non ac truck
Fact
That Blazer is a work of art, man. Such a cool car.
im in manchester uk. we dont have the same animals in our forests over here. the noises of coyotes? frogs? crickets? and sasquatches? in your videos are really good. please always leave the garage door open so we can hear them. thank you very kindly sir
I'm glad you like it, I love the sounds of the woods
I hear a lot of frogs in the night scene but the howling is probably a coyote.
Just a note on the syringe, you can take it right out and pour your liquid in and then pressurize it to put the liquid into whatever you want. Easier than trying to pick the liquid up
JD has gotta be the luckiest kid around to have such a great dad and teacher! I used to work like that with my dad but he had NO patience 😂😂😂 I still have flashlight trauma!!!
My 94 suburban, the previous owner took it to a shop for a heater core, was about the same quote, I changed it in 10 minutes. Sometimes I think shops hear heater core and think all vehicle's it requires the dash to be taken out.
“This thing needs a ton of suspension work !! “ he says as he pours the coals around the corner and gets very sloppy !!! Absolute GOLD 👍🏽👍🏽👍🏽👍🏽
Very bouncy, those vettes should control like butter
A lot has to do with proper footwear. I’m not sure those cars perform as well unless you’re wearing New Balance sneakers, tall socks, khaki shorts and a button up shirt with pictures of Corvette’s on them 🤷♂️
Bonus point
Years ago we had a auto parts store, called nationwide auto parts. They sell it foil tape in auto body department body repair. This was in the 80s
Atta Boy Dalton way to take care of MOM. Like that you went the EXTRA. Fix that SHackle!!!
Your a wonderful son and a great dad passing on your knowledge well done very enjoyable content.
I owned a 1980 K5, great truck. Great video also!...
As parents, we often don’t realize just how much our own kids are learning and growing (because we see them all the time, so like watching a flower grow, if you watch it all day, you don’t see it blossom - but if you only saw it once or twice a week, you’d notice it). So I wonder if you see just how much your son is learning and growing. He’s an impressive young man. He is clearly picking up what you are putting down!
You only get 1 Mum, 1 Dad folks. The fact that MrD takes care of his? 🙌👏👏👏👏…. Learn a lesson from this content, instead of criticizing! Bravo MRD🙌
Ahh square body life. One of the first repairs I did myself at 17 was a heater core on the hand me down ‘86 K20. And if I remember correctly it was a two piece heater box requiring an arm through each side to thread the tiny bolts out of the blend door rods all by feel. Next job was a leaking fuel tank due to those lousy plastic shields trapping dirt and water.
Absolutely love the K5, and the slot mags are the perfect wheels for a 4x4 squarebody!
Absolutely LOVE the slotted dish mags on your Mom's Blazer....Those look so good on that vintage SUV. 👍
Hey PBG I just wanted to say that I saw you in one of junkyard digs videos a while ago and ever since then my dad and I watch you every time you upload. Thanks for all the laughs and please keep up the great work!
I so, so, so much want one of those K5's!!! I love the look and stance, it's meeeeean! That one really looks good, lucky your mom has you to take care of her ❤
Man that ole k5 is sweet also just watched the outside the barn video slab turned out nice can’t wait to see the new building and all the other good stuff from PBG
Thanks!
I'm a Ford guy, by damn dad's driveway is stacked with gorgeous GM's. Mom's K5 is a cream puff and I'm unbelievably jealous.
Nobody noticed Dalton backing out my 4 speed 1970 Torino GT though?! Lol
@@johnsummitt2271 that's yours? I thought it was Dalton's! Awesome car as well.
Color me double jealous.
@@johnsummitt2271pretty dope ride
I love this Blazer! And love a guy that looks out for mom!😁👍🏻💪
Those slot mags are EXCELLENT
Love your channel, proper grass routes no nonsense stuff. Your son seems really enthusiastic and keen to learn .
JD looks and acts just like you... poor fella. Thanks for showing the rest of dads how it's done.
Moms ride is a pretty sweet rig . Good to see you giving it love
I really like your Mom's K5. The engine swap was the first PBG episode i watched, and that lead to the binge and therefore a subsequent subscription and eventually a membership. The Vette isn't bad after the Crossfire delete. If you were driving without New Balance and the Members Only jacket, that could cause the problem you were having. I like the 2 vehicle special episode format 👌🏻
Thanks! Frankly, I had to do the work anyways, but for me to pick up a wrench these days I also need the camera rolling.. So here we are lol
🤣 I just made a comment about the car not performing without them NB Sneakers on!
@@RustyZipper clearly the problem 👌🏻
So I learned this lesson with my dad. It's not that the fuel pump is bad out of the box. It's that a fuel system that has a return line. That's how it creates an equilibrium. Otherwise it's just gonna suck on the tank until it can't suck anymore. And that's when it breaks the webos inside the pump. And that's when the hole spits out. Because that's what prevents the fuel from leaking into your oil and ruining your engine. The only thing you can do is either drill.A hole in your gas cap like we did or you can put a vented fuel cap.On if they are available or run a pump with a return
Running a return pump is always the way to go it will stop you from vapour locking
@@600wheel truck wasn't equipped from factory. And I really didn't feel like installing and dealing with that
@@salty-9 I get it. It really only causes a problem on really hot days and generally to hopped up engines anyhow
@@600wheel It's a 78 f250 long bed super cab camper special custom. 460 an a c6
@@salty-9 Nice, that 460 might like it. Cooler fuel gives you better fuel efficiency. A cam intake and some aluminum heads with a carb and headers would really make it happy
🤘😎🤘
The father/son dynamic here is amazing. Keep it up, duders.
I’ve always loved the square body Blazer!!!! Great shape! A real time capsule!!!!
My buddy got quoted $1000 to do his brakes.
$180 in pads and rotors later, we did it for $180!!!😂😂😂
BMW's are great, those shops soak those owners like crazy. I've made money on 6 of em. "Mechanics special,, blown head gasket". Quik look and it's water pump. $80 pump and I just made the special tool needed from a piece of flat bar.
Flip the car for a tidy $2k profit.
Plus what-ever the beer cost. Oh no, never mind, you'd have bought the beer anyway! LOL
Air filter and cabin filter for my wife’s Subaru for the dealership to do it $250. It was $50 in filters and less than 5min of my time
Basic maintenance - and that includes diagnosis of a water pump over a head gasket - should be required knowledge to get your high school diploma, that and the same qualifying test the police take twice a year, that should be in curriculum as well if you're going to provide knowledge basically forced into children's minds, might as well be useful knowledge.
I have a 1979 2wd blue and white Blazer. It is very nice! I still have quite gotten to restoring it!
You making come true I was just watching you that is awesome thank you for keeping a trucker from not going lonely
Thank you for bringing the crap I order online to my house and also for putting up with those moron drivers out there now!
@@RustyZipper there’s a problem with that statement there zipper I deliver the food I got a reefer on my back 24-7 I ain’t hauled for Amazon in quite awhile but I appreciate it you have a great day
@@michigander_truckerrides985 - thanks for bringing me my food then! Lord knows I could do with less but that’s the American way! 🫃 I really wish all you truckers would go on strike for just one day a week and make more folks appreciate all the sacrifices you drivers make!
Shop's can be sneaky. Your parents have good taste in vehicles!
The heater core replacement brings back some good memories of my High School car a 89 Chevrolet Corsica. When my heater core went out and started to pump out white smoke in the car. It was pouring antifreeze on the passenger side floor. After I got it fixed I used my Mother's brand new carpet cleaner. Man she wasn't happy about that. Lol 🤣😆🤣 good times.
I watch this channel regularly because you’re relatable, entertaining and I usually get a few laughs every video. Thanks for being a true “everyday guy”
Your mom seems like a really nice lady. Cheers to her.
WOW!!! What a really Nice truck your Mom has.
Great video Dalton! One of these days it would be cool to meet you and the crew. Hell, I feel like I already know your entire family. Keep it up, best on the tube!!
I put a cheap fuel pump in my square.
It lasted about 3 months.
I put a Napa gold pump in after that.
It’s good so far. .
That return line helps it not vapor lock in the summer.
But you already know that.
Dalton, Really enjoy the down to earth way you work on cars. Keep up the great work!! The new shop will definitely be a game changer.
Fell asleep watching the roadrunner video
Wakeup and theres a new one
Best nap ever
One of the cleanest K5's I've seen in a while. And not all cut up!
The more Dalton works on it, the more cut up it gets lol
Mom's lucky to have a aww especially awesome son to keep the fleet happy and healthy. Great job and dedication to the family Dalton. Have a great weekend.
Love your show keep up the good work. Good to see you and j.d. getting a new shop. Well deserved
YES. my kind of hero. HOT DOG DOWN A HALLWAY. I tell people that all the time. 😂😂😂 but yes i agree with you on shops. This is why i work on my own stuff. Can't trust people anymore.
It’s a worn valve guide. The stem slaps in the guide. Common small block issue.
😂 when you asked JD if he knew what a clock was. 💯 valid question as I have asked my kids to tell me what time is on the clock and it takes them a little while to figure it out 😅
Mom's 78 K5 is a peach! I had a 79 a Wyoming truck very clean loved it should have kept it. Had the SilverRayDo trim level PW/PDL/CC/A/C Am/FM 8 track Power Rear Window, Rally Wheels, 350, TH400, NP203 3.73 and a locking Diff. That truck was awesome! Long Live the Self Tapper King!
My mom daily’s a ‘78 C10. They should hang out sometime 😂
I love this blazer soo much, idk why maybe because it's bright yellow? Love the video Dalton
ur mom and dad must be very proud of you And JD for all the amazing work you do and time spent !
I love that Blazer.
Wait, BOTH of them.
Your mom has cool stuff just saying she likes classic 👌 vehicles luv it.
Good job you're a good son helping your mom and dad..
Like the tablecloth head liner.
Exactly.
Honestly. First time I’ve ever seen a brake drum you could shave with. I kept hearing that one Little Rascal saying “ Remarkable! “.
Those project farm tests are frickin excellent. The science is sound, and his recommendations are solid. He also got me switched to cheap bar oil. Just hope the price doesn't creep up(it already went up in proce on Amazon, probably because they were flooded with thousands of orders now that his video came out.
The Cletus McFarland crown vic effect.
Oh and any time you have a bolt stuck in a sleeve......if a ball joint clamp is available, and fits.....it always does a great job pushing stuck bolts out of leaf spring bushings....or shock bushings.
I love how your mom drives a classic squarebody.
Check the tourqe converter bolts.
The knock sounds very similar to a bad harmonic balancer, another option could be a torque converter bolt. Great video, Thank you for sharing!!!
I had a 70 Z28 Camero with the LT1 350 360 Hp and it had a valve train noise similar, Rebuilt the engine with All new parts double roller timing chain and all new Cam and lifters ,long story short that same noise was still there ,nothing was over looked and everything was measured twice and was in spec ran the car like that for years zero problems .
Can’t wait for the new shop to be done!
graeat lookin pontiac in the back ground, that is the identical year of my tempest i drove in highschool...
Rustoleum "reforms" rust. I love it.
Taking care of moms rides. That's great. There are very few credible ethical shops. Pretty much the same in the Pacific N.W. Keep up the good work👍.
Can't beat a good rust weld.
This is the BEST Content on TH-cam - VGG was here and lost its way.. :) SO... You drink that stuff so you won't DIE... :)
Yes he did. Liked VGG when he was not selling his self out to all the sponsors and when he moved to Nashville it changed him
That's funny how you guys feel the same way I do that's what makes your videos so entertaining!! And that you are still working outside your small garage.. and continue to work a full-time job so down to earth!
People always change when that silver plaque arrives. Dalton probably uses his as a mixing board for body fill 🤷♂️
@@davidbryant5875Damn that guy for not wanting to be broke the rest of his life and how dare he work his ass off to get to where he is. I’m sure PBG is looking forward to the day that his hard work begins to pay off for him and his family. Then y’all can bitch about him selling out.😂
He has to pay those bills and feed then little humans.
Bloody hell, the dumdum! When I was younger I worked in a spray paint shop in Dunedin New Zealand we sent the boy to the suppliers for a can of dumdum. He thought we were joking, so he buggered off to the beach.
I must have missed the line. Is this a candy? Bug spray? Or paint? I’d love to know more. Thanks in advance.
It's a tar like sealant. Really sticky, really messy messy
@@MattMunro74 thanks, have a good day.
Could a plasma torch be used to ... carefully ... remove the frozen shock bolts? 🤔
I’m glad you did the fiddly bits to make sure your moms ride was better and safer
Very impressed with your attention to details on your Mom's Blazer. They are lucky you are so talented and willing to help.
Those K5 blazers with the detachable roof. That body is cherry.
I love the new shirt 👍 . As always content is great an also helpful.. thanks for your time ❤
Torque converter bolts.. on transmission … it’s sounds lower end but not real bad like a soft knock and will echo off everything cause it’s connected to the crank shaft wich has everything close proximity… sounds like almost everything !!!
Sure sounded up front though.. I've ran into cracked flexplates and torque converter bolts before, I agree it sounds like that
@@PoleBarnGarage well thank you for letting me know you read my message when you find out and if it is .. I appreciate if you let me know or give a shout out when you’re filming again or do a video on it and repair it .. I’m curious about it myself .. from what I heard in video it didn’t get louder that I heard and it sure sounded like loose converter bolts .. and if the same person serviced that transmission like they serviced the shocks on that blazer lol I could see it being loose converter bolts probly no lock tight on them or not torqued to specs… lol thanks dalton looking forward to more cool content .. lol how’s that king cobra doing !!! Ok ttyl ✌️ 🤙🤜🤛🤙🤙🤘🤘‼️‼️💯💯
I learned the 'stethoscope' trick from my granddad. He would use a long screwdriver and listen to the handle. On rockers, with covers off and engine running, he would hold a hammer by the head and 'feel' the rockers with the handle. Great channel!
That Blazer is really freakin nice.
Heartwarming to see you and your 'right hand man' always together helping each other. You have a wonderful family, though I suspect, you already knew that! God bless you my friend and have a great day! 😁
Dang... Those coyotes were really close
Somebody go pet the little puppies 🐶 😂😂😂😂😂😂
My second modt favorite video to date. Thanks pal, keep the C3's coming!
It's sad the kind of BS that shops are doing now 😢it's ridiculous. Very nice of you to fix your mom's truck nothings to good to keep mom safe 😊
Mr Hach ,,Try Torque converter bolts you forgot to tighten them. .ha doy.
I can't believe your mom drives a square body blazer. That is pretty cool
She’s from Pasadena 🤫
😂 i could listen to you work on POS's all day. Your mom should b proud of you and JD
Put axle grease on the push rod so it holds it in the block while you bolt up the fuel pump 😉
Fairly certain he mentioned that in the video
Keeping mom safe ❤
your mom sounds like a badass driving around in a k5 blazer and an 80s cocaine rocket
👍Good stuff! 1st video of yours I ever watched back when u installed the 350. Great truck, good times!