Fantastically helpful video. Perfect step-by-step instructions, super clear video and angles, and just the right amount of information. If only every how-to video on youtube were this helpful...
Your RTR non led grille install was waaaaaay better. Why did you take it down?You actually show the exact spot of the grille to drill and even recommend a slightly smaller bit than 7/32. Saying “it’s not that hard” with the camera 5ft away and not actually showing the recommended spot to put a hole in your new $550 grille isn’t exactly making it easier.
Would be nice if you said exactly where to drill on that opening. You used to explain that on the non LED version of this grille but that video has since been taken down. If you’re even off by a cm it affects the way the insert sits.
That’s what a air filter is for and if your worried about the air filter gettin dirty just stick with the stock front. There isn’t a bug in the world that would fit tho that tiny intake hole
Put mine all together lights turn on but one of the headlights doesn’t turn off only one side stays on to drive at night both turn off but to drive in the day it only turns off on one side but the grille lights stay on
do you have to remove the bottom grille or could you just get the upper grille only since thats offered on your website or is that for if you are replacing the upper grille only
Is it possible to just remove the chin spoiler bolts for the belly pan as opposed to completely removing the belly pan in order to take the bumper off?
@@matthew-elite if it's not bad ground wire , other thing could be is the harness that connects to your headlight. It should be a relatively an easy fix, hopefully it goes smooth for ya
I installed mine today drove to the gym and the car did not want to turn off. I pressed the start stop button but nothing eventually I disconnected the battery it still did not turn off. So I figured I disconnect the driver side headlight plug and the car turned off. Can anyone explain why this is happening
This full kit is in-stock right now! Check out the following link! -Zach www.americanmuscle.com/rtr-grille-w-led-accent-vent-lights-2018-gt-ecoboost.html
I dont know who the disrespectful employee was who answered my call. Trying to place a order that is very well needed, for me to be able to drive my car . Because the fuel rail was bent by the mechanic who was taking off the IMRCV. Which is a part that always goes bad, a emissions part that never should have been included in the car. I was trying to explain and order a fuel rail and new headlights because the Raciom one piece never ever has worked anyway. Easy to install one hour. Passenger side never has set in place and the factory and the screw adjustment that came with the lights didn't work 3 hours working with it. Only to have the park light side to never secure down. Making it impossible at times to see out. Always causing it to vibrate out about 5/8 of a inch out from the fender. Trying to order both part and several more parts for my 98 Cobra and 99 Cobra tail lights, suspension drop,racing shocks,new rim and tires to make the 99 race ready with the 6 speed built terminator transmission just put in. Getting ready for the drag strip, so we can truly see how it's going to run. Motors been ready stage 2 vortech supercharger, and built and bored motor. Itching to be ran. But your employee who decided to hang up on me rude and very unprofessional. I was straight up with the guy, that I didn't want to talk to no employee that didn't know about mustangs. Because last year about this time last year, the guy I placed a order with sent me 4 Nitto tires NTSSSG2 315 size for the back, and the size on front wasn't in stock and he assured me the size in stocks would fit on the front. They are wider not taller and wod work great. After picking up the car , it was dark and I looked at it in the lights at my shop. Front tire where like 1 3/8 taller than the back making it look like crap.Jacked up in the front. Looking like these jacked up truck ( Carolina squat )... that looks like a dog taking a dump or humping someone's leg. LIKE STRAIGHT UP CRAP !!! I call the guy I placed the order with back , he said you can raise the rear. The cars is dropped with suspension from AM ,race ready. His mistake at MY COST .... 2 Brand new nitto tires in the shed that can not be used. And since they where drove about 4 miles I can't send them back, so I'm stuck with 2 tires I can't use. And it's are not cheap especially the high performance ones.So I wanted to mack sure that no more mistakes were made that would cost me. And I wanted someone who knew not a new employee learning the ropes. Maybe he was the one who made the mistake ? But I just don't want a new employee taking my order. Because no matter if you send back a part and its their fault, the customers pay for the shipping and you lose money. Because of a new employee. But whoever it was that hung up on me and didn't call back. To any supervisor who reads this, employees like this can ruin a business. And I know first hand on how hard it is finding good employees. Because I run a custom shop and know how hard it is finding a good employee. Honda management told me they are lucky if they get 1 employee out of 31 employees they hired to work out. That how bad It is in Bama finding a good one, the statistics from Honda Manufacturing. Look at the date and about a little over a hour ago the incident happened. And set this dude down and tell him a few things about doing the customer wrong. Would he like to give his hard earned money away. To a order you trusted to be right and it is not. Wod he like that , if so send me a check or money order for these tires I can not used. Send me the payment, and I'll send him the tires so he can use them to start a bond fire. Since he's got money to throw away. !!!! BECAUSE COMPANIES LIKE THIS DON'T DESERVE MY MONEY !!! The ones this cost the customer's not the company's.... even when it is they're mistakes. ,
This is nice you think oh it's made for Ford you shouldn't have any problem when you have a warranty but you a butt you put this on they're gonna say any refuse boss that gets messed up this is the problem Though your warranty is not going to cover it cause they're gonna cancel it
Shop this RTR Grille: muscle.am/3m3TpUb
Subscribe For New Mustang Videos Daily: muscle.am/SubscribeAMyt
Fantastically helpful video. Perfect step-by-step instructions, super clear video and angles, and just the right amount of information. If only every how-to video on youtube were this helpful...
Thanks for watching and happy to hear it helps! -Zach
Your RTR non led grille install was waaaaaay better. Why did you take it down?You actually show the exact spot of the grille to drill and even recommend a slightly smaller bit than 7/32. Saying “it’s not that hard” with the camera 5ft away and not actually showing the recommended spot to put a hole in your new $550 grille isn’t exactly making it easier.
Would be nice if you said exactly where to drill on that opening. You used to explain that on the non LED version of this grille but that video has since been taken down. If you’re even off by a cm it affects the way the insert sits.
Cool! Nice grille kit!
Is removing the belly pan absolutely necessary?
so i can’t just buy the lights ?? i need to get the front grill
Since there is a direct airflow, how do you prevent bugs and leaves coming through the intake snorkel?
That’s what a air filter is for and if your worried about the air filter gettin dirty just stick with the stock front. There isn’t a bug in the world that would fit tho that tiny intake hole
Put mine all together lights turn on but one of the headlights doesn’t turn off only one side stays on to drive at night both turn off but to drive in the day it only turns off on one side but the grille lights stay on
Nice looking grill. But looks like the fitment is off. Bottom edge of the grill in the video appears that the lower clips has a huge gap.
My rtr grille just came in I installed the light and for some reason they don’t have a ballast ? I’m confused if that’s how they come now or what ?
You said there’s one for a 2016 eco?
Question; where can I buy a new belly pan for the ecoboost ?
Can I add just the lights to the stock grille?
Agee. One of the first mods I’d do if I had a 550
Me and my brother tried installing it our selves and I tried connecting it to the lower bumper amber lights😭😭😭 so now we gotta do it again
Will these lights fit on the MP concept grille?
do you have to remove the bottom grille or could you just get the upper grille only since thats offered on your website or is that for if you are replacing the upper grille only
You could totally just go with the upper if you'd like Ben! -Justin
Would a local mechanic shop know how to install one of these grills?
Absolutely! I would just make a call to ask before hand to see if they do work like this. -Zach
Is it possible to just remove the chin spoiler bolts for the belly pan as opposed to completely removing the belly pan in order to take the bumper off?
lost communication with image processing module a ..... I'm getting this message on my car and it won't turn off completely unless I turn off loghts
Could be just bad ground wire
@@ulfrlockseven ill be getting it checked soon ...its the plug n play style I didn't have to terminate anything myself
@@matthew-elite if it's not bad ground wire , other thing could be is the harness that connects to your headlight. It should be a relatively an easy fix, hopefully it goes smooth for ya
@@ulfrlockseven hopeing so lol thank you
Can I install the pony logo on this grill?
Can I just buy the lights and not the upper grill? Will it bolt up the factory grill?
i have the same question
Is there one for a 2012
I installed mine today drove to the gym and the car did not want to turn off. I pressed the start stop button but nothing eventually I disconnected the battery it still did not turn off. So I figured I disconnect the driver side headlight plug and the car turned off. Can anyone explain why this is happening
Same thing happened to me today! Did you end up finding the issue?
Is the pony badge attachable to the new upper grill?
You would have to get custom as the factory mounting points aren't there. -Justin
Are the RTR lights also running daytime lights like the other day time running headlights
I just installed mine and none of them turn on n I double check the harness connection and still nothing only the headlights turn on..
I'm having the same issue have you found any fix?
Same issue any fix?
@@juniorperez1020 from the forum I saw its apparently loose wires that connect to rtr led lights
I clicked the link and the grille was only $200 is it the whole kit for 200 or just the little lights ?
The accent light kit itself if you want to purchase it separately, is $199. The entire kit is currently $749.97. -Zach
When are they going to be in stock again?
Is there anyway I could install the lights only I wanna keep the pony?
did u ever figure out the answer ?
When will they be in stock again?? Please soon!!!
This full kit is back in stock right now! -Zach
Love this rtr grill kit but it’s been out of stock for months now. Unless I miss the window when it's available 🤷🏽♂️
You should add your email to the "notify me" window on-site! That way our system will automatically send a notifications once back in stock! -Zach
Go to rtr site directly that’s what I did
when will this restock???
12+ weeks! Its gonna be awhile sadly! -Zach
When will this be back in stock? Been trying to get one for months
5-6 weeks! -Zach
RAD-iator. Im sold!
It's a PA thing, I say it too. 😁 -Zach
this work on a mustang ecoboost 2021 ??
Yes it does! -Zach
Had mine on for 2 months before one filled with water
did they repair it
Do these change colors by any chance?
The LED Accent Lights on these grilles do not change color, sorry! -Zach
has anyone tried to fit this on a new gt500 bumper?
Will these fit the gt350 ?
when will they be in stock
This full kit is in-stock right now! Check out the following link! -Zach
www.americanmuscle.com/rtr-grille-w-led-accent-vent-lights-2018-gt-ecoboost.html
Wow life saver. I couldn't figure out how the lights hooked up. 🔥
Glad it helped out! Thanks for watching! -Zach
Yes
Wao Nice Job Brother' #nadeemvlogs
3:25 the Mustang 6 months later 🤰
I dont know who the disrespectful employee was who answered my call. Trying to place a order that is very well needed, for me to be able to drive my car . Because the fuel rail was bent by the mechanic who was taking off the IMRCV. Which is a part that always goes bad, a emissions part that never should have been included in the car. I was trying to explain and order a fuel rail and new headlights because the Raciom one piece never ever has worked anyway. Easy to install one hour. Passenger side never has set in place and the factory and the screw adjustment that came with the lights didn't work 3 hours working with it. Only to have the park light side to never secure down. Making it impossible at times to see out. Always causing it to vibrate out about 5/8 of a inch out from the fender. Trying to order both part and several more parts for my 98 Cobra and 99 Cobra tail lights, suspension drop,racing shocks,new rim and tires to make the 99 race ready with the 6 speed built terminator transmission just put in. Getting ready for the drag strip, so we can truly see how it's going to run. Motors been ready stage 2 vortech supercharger, and built and bored motor. Itching to be ran. But your employee who decided to hang up on me rude and very unprofessional. I was straight up with the guy, that I didn't want to talk to no employee that didn't know about mustangs. Because last year about this time last year, the guy I placed a order with sent me 4 Nitto tires NTSSSG2 315 size for the back, and the size on front wasn't in stock and he assured me the size in stocks would fit on the front. They are wider not taller and wod work great. After picking up the car , it was dark and I looked at it in the lights at my shop. Front tire where like 1 3/8 taller than the back making it look like crap.Jacked up in the front. Looking like these jacked up truck ( Carolina squat )... that looks like a dog taking a dump or humping someone's leg. LIKE STRAIGHT UP CRAP !!! I call the guy I placed the order with back , he said you can raise the rear. The cars is dropped with suspension from AM ,race ready. His mistake at MY COST .... 2 Brand new nitto tires in the shed that can not be used. And since they where drove about 4 miles I can't send them back, so I'm stuck with 2 tires I can't use. And it's are not cheap especially the high performance ones.So I wanted to mack sure that no more mistakes were made that would cost me. And I wanted someone who knew not a new employee learning the ropes. Maybe he was the one who made the mistake ? But I just don't want a new employee taking my order. Because no matter if you send back a part and its their fault, the customers pay for the shipping and you lose money. Because of a new employee. But whoever it was that hung up on me and didn't call back. To any supervisor who reads this, employees like this can ruin a business. And I know first hand on how hard it is finding good employees. Because I run a custom shop and know how hard it is finding a good employee. Honda management told me they are lucky if they get 1 employee out of 31 employees they hired to work out. That how bad It is in Bama finding a good one, the statistics from Honda Manufacturing. Look at the date and about a little over a hour ago the incident happened. And set this dude down and tell him a few things about doing the customer wrong. Would he like to give his hard earned money away. To a order you trusted to be right and it is not. Wod he like that , if so send me a check or money order for these tires I can not used. Send me the payment, and I'll send him the tires so he can use them to start a bond fire. Since he's got money to throw away. !!!! BECAUSE COMPANIES LIKE THIS DON'T DESERVE MY MONEY !!! The ones this cost the customer's not the company's.... even when it is they're mistakes.
,
Shut up
Shut up.
Shut up
$750! Thats pricey! i think ill stick with the stock look for now!
just about sold out everywhere i look 🥲
Should be back in stock in about 4-5 weeks! -Zach
750$ is a bit pricey. But looks great. I’d prob just pay someone to install this, too lazy to do it myself lol.
No shame paying someone else to hook things up! Thanks for watching! -Zach
I want to pay someone to do it but I wouldn't even know where to begin to find someone who would be able to 😭😂
@@anthonyprieto1495 dealerships can. I paid 300 for my instal
There's no fucking way you did that that easy. I had a hard time getting that fucking plastic off
I need someone who can fix I will pay
If only it wasn’t 700$! Lol
I love mustangs, but this one looks whatever, the peugeot 208 2019 has a much better headlights design 🤷🏽♂️
I just don't see the appeal of making my Mustang look like a pig with a light-up snout.
This is nice you think oh it's made for Ford you shouldn't have any problem when you have a warranty but you a butt you put this on they're gonna say any refuse boss that gets messed up this is the problem Though your warranty is not going to cover it cause they're gonna cancel it
Gadget 🤷♂️
First
Is there a way to turn the grille on and off? On your website it says you can. Not sure how