Dear BaldTheBuilder, thank you for your video. Ours failed the same way three days ago, and we just fixed it this morning by removing the door switch. We are glad that we didn't have to put it in the landfill. It is our favorite toaster oven too.
Our function switch failed and couldn’t quite figure out how to get the box apart until I saw your video. Figured it out from there. $20 part and two hours (including some cleaning). Saved couple hundred. Thanks for posting.
You don't really have to remove the back to get to the door switch. I was able to remove just enough screws from the left side to pry the side outward enough to bypass the switch.
We have a different Cuisinart toaster oven, a TOB 1010 with just a push start/start button that won't come on. I've taken it apart to where I can see the control panel. Can you help with where to diagnose next? THX
Hi . I have the same oven brand new and it doesnt hold temperature . If i set to say 400 degrees it just keeps climbing up to 500 and beyond ???? I put a thermoworks temperature gauge inside to test the accuracy .
@@baldthebuilder2588 I shouldn’t think so, that’s why I asked. House was built in 1978. I got it working again and test ran it, the plug blades get really hot. I’m thinking maybe the outlet is worn out. It was the switch not engaging that made it quit.
![[LIVE] : ONE ลุมพินี 78 | คู่เอก "ปกรณ์ vs ฟาบิโอ"](http://i.ytimg.com/vi/LSOmgl0Th2c/mqdefault.jpg)
Dear BaldTheBuilder, thank you for your video. Ours failed the same way three days ago, and we just fixed it this morning by removing the door switch. We are glad that we didn't have to put it in the landfill. It is our favorite toaster oven too.
Our function switch failed and couldn’t quite figure out how to get the box apart until I saw your video. Figured it out from there. $20 part and two hours (including some cleaning). Saved couple hundred. Thanks for posting.
Can’t really see what you are doing , but I am happy to see how to fix it thank you 🙏🏼
Nice job! I'd already have ordered a new one from Amazon!
You don't really have to remove the back to get to the door switch. I was able to remove just enough screws from the left side to pry the side outward enough to bypass the switch.
I followed your instructions and was able to repair my toaster oven .we can do without that switch. Right thank you
Awesome
Thanks! Fixed in minutes
😂😂😂 “this is my favorite toaster oven and I only had it for 2 years” ahahaha
Good job
Mine is doing the same thing I'm not sure if I can do it but I'm going to try
Can't hurt to try
Nice video. For my oven, only the toast switch works, is it the switch on the far left that's bad? Thanks.
Probably time to just get new one
They put this same crappy switch on space heaters, etc, They build them to fail.
We have a different Cuisinart toaster oven, a TOB 1010 with just a push
start/start button that won't come on. I've taken it apart to where I can see the control panel. Can you help with where to diagnose next? THX
Sorry ,I'd have to see it
@@baldthebuilder2588 Thank you for replying to my question. We've since just replaced it.
Hi . I have the same oven brand new and it doesnt hold temperature . If i set to say 400 degrees it just keeps climbing up to 500 and beyond ???? I put a thermoworks temperature gauge inside to test the accuracy .
If it's brand new ,just return it. Thermostat inside is not working most likely.
Ours just quit working today, the plug is partially melted. Is it possibly overloading my house’s electrical system?
It shouldn't be ,unless house is really old. Electrical Breakes should prevent it
@@baldthebuilder2588 I shouldn’t think so, that’s why I asked. House was built in 1978. I got it working again and test ran it, the plug blades get really hot. I’m thinking maybe the outlet is worn out. It was the switch not engaging that made it quit.
May i have it shipped to you to fix? I need the exact same repair.
I had to lie down after watching how I would have to disassemble
Sorry , I'm pretty sure it will cost more in shipping , then buying g new one 😀
My function know stopped working but definitely not knowledgeable to fix it :(
Cant see!!!!Your hand is in the way!!!
sorry