managed to get the throttle plate in and connected- spring position is crucial for the small spring- glad to took pictures with my phone! up and running now thanks Jim - took alot of patience like you said!
Jim, my favorite Snapper throttle control was one fabricated for a friend to work like the handlebar grip twist throttle on a motorcycle. A real "Easy Rider."
I am going to have to change my throttle cable Jim, I will be doing that this week. I look forward to modifying my snapper into a soft fitted 8 wheel rear engine Snapper rider mower. Look forward to get my modification parts from you Jim. Good day and peace too. Victor
Great advise there now i need help my series 35 snapper it will do great on flat area.but when i go up.the drive way in forward it will not move so i have to back down the driveway turn the machine around & go up the driveway backward,s i need help.in getting the forward movement back like it should be
Here's a little tip..i ran out of oil in my oil can..all i had was mobil 1. 5 w 20..and oh boy that works better than than the oil i had in it.. You know the squirt can..5 - w - 20 is alot thinner works great on cables...just a thought. Cheers 🍻🍻🍻🇺🇸🇺🇸🇺🇸
What size wrench do I need to tighten that cable? I have a snack for like you and before I go outside to the lawnmower I want to take the rope wrench. Thank you
Hey Jim, I really appreciate your videos. The plastic piece that attaches to the bracket assembly you mention at 2:32, do you happen to have the part number for that? It's for a Snapper model 2812523BVE. I would really appreciate your help
Hi Jim, can you tell me the part number to order that bracket that has a white plastic piece because our white plastic piece broke on our riding lawnmower any help would be appreciated. Thanks.
OK now I think I know what piece you’re talking about if it’s a white plastic piece that Goes on your control plate where your throttle cable hooks into you cannot buy those pieces you have to buy the whole control plate. Jim
thanks Jim- my throttle plate broke- plastic piece on it-- crap-- so i ordered a new one on amazon but are there any tricks to getting the throttle cable back on and spring? I know there are 3 screws to take out and a bunch of wires looks like ground wires to take off- mike
No tricks that I can think of just a lot of patience sometimes it’s hard to get the link in and the springs hooked up. Let me know how you’re doing. Jim
@@jimjackson9381 get the part later today- got the old one out and took pictures- thanks- let you know- used my lamp that i wear on my head - works great- wife suggested it-lol- i also bought a fuel shut off-
Hi, could you post a link of what you ordered? Because our white plastic piece broke on our snapper riding mower and I am not sure where to order it from. Thank you.
What is the part number for the bracket that he said you have to replace the whole bracket not just the little plastic piece. Having a hard time finding it, i have 17hp rear engine 33" cut snapper and the little plastic piece broke, and I remembered in the video he said you have to purchase the whole bracket. So if I can get a parts number for that bracket with the plastic piece that would be great.
Sorry to bug u . I have a question about mines. It doesn't move when I put it in gear. I've notice when I let go of the brake pedal the brake itself stays applied. Need help thanks
The first thing I want you to check take your hubcaps off and check the bolts that go through your axle and wheel flange and make sure neither one of those are broken or missing. And let me know what you find. Jim
My local repair shop recently replaced my throttle cable and now the new throttle doesn't allow me to use the full range of the lever . When i slide it down to low speed the lever stops about a half inch before it gets to the end of the slot on the lever panel. Is this a problem that i should be concerned about and ask them to redo or not ?
A lot of them are that way it’s hard to get an original so it fits properly but watch your engine where your linkage is and move the lever back-and-forth and just make sure you’re getting full travel on the linkage to the carburetor. Jim
5/16 wrench I need to take a flashlight with me because I am not a mechanic. I’m just a farm boy my brothers were good but I am not thank you very much.
I would start by taking your throttle cable off of your control plate and out of the little white plastic block and see if it will move freely without the cable hooked to it and don’t have your engine running if it does move freely then your throttle cable is probably starting to rust and it needs to be oiled or replaced, if it doesn’t move try oiling it with some WD-40 and working it back-and-forth , let me know what you find out. Jim
What's the part number for that throttle cable? It's the EXACT one I need ! I have the 84877 301323BVE RER. OR also where I can look up parts for My RER mower. THANKS for the Video JIM !
I looked on Parts Tree.Com. for that part number and I can’t find it that is something you’re going to have to call them and ask their number is on their homepage in the top right hand corner thanks Jim
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
Thanks Jim. Just replaced my cable. Your video helped me a lot. 👍
managed to get the throttle plate in and connected- spring position is crucial for the small spring- glad to took pictures with my phone! up and running now thanks Jim - took alot of patience like you said!
Jim, my favorite Snapper throttle control was one fabricated for a friend to work like the handlebar grip twist throttle on a motorcycle. A real "Easy Rider."
Got all 3 of my Snappers out today and mowed some weeds! Burned out the old non-ethanol and got some fresh circulating.
Lucky guy that sure sounds like fun. Jim
I am going to have to change my throttle cable Jim, I will be doing that this week. I look forward to modifying my snapper into a soft fitted 8 wheel rear engine Snapper rider mower. Look forward to get my modification parts from you Jim. Good day and peace too. Victor
On my rider the little white block broke off so what is the assembly called so I can order a new one. Thanks
Great advise there now i need help my series 35 snapper it will do great on flat area.but when i go up.the drive way in forward it will not move so i have to back down the driveway turn the machine around & go up the driveway backward,s i need help.in getting the forward movement back like it should be
Subscribe, then when you go to TH-cam click on Jim & all of his great snapper videos will appear.
Robert Mailhos
You need to watch video number 70 and tighten your yoke spring. Jim
@@jimjackson9381 okay thx
Here's a little tip..i ran out of oil in my oil can..all i had was mobil 1. 5 w 20..and oh boy that works better than than the oil i had in it..
You know the squirt can..5 - w - 20 is alot thinner works great on cables...just a thought. Cheers 🍻🍻🍻🇺🇸🇺🇸🇺🇸
What size wrench do I need to tighten that cable? I have a snack for like you and before I go outside to the lawnmower I want to take the rope wrench. Thank you
Hey Jim, I really appreciate your videos. The plastic piece that attaches to the bracket assembly you mention at 2:32, do you happen to have the part number for that? It's for a Snapper model 2812523BVE. I would really appreciate your help
@@Fade2Zero that part is part of your engine, I would need your complete model code and type numbers from your engine to find that. Jim
hey Jim- where can i guy that fuel shutoff- i have to change that whole bracket out and looking at shutting fuel off but not sure of part number?
You can buy them at Menards Home Depot ace Hardware any place that sells or works on lawnmowers you can buy them anywhere. Jim
Is there a part number for that cable?
Do you happen to have a part number or a link for this throttle? I've restored an old sr95 and this is the final piece.
Hi Jim, can you tell me the part number to order that bracket that has a white plastic piece because our white plastic piece broke on our riding lawnmower any help would be appreciated. Thanks.
Can you send me a picture of the piece I can’t place it. Send it to jimsfixitshop@gmail.come thanks. Jim
OK now I think I know what piece you’re talking about if it’s a white plastic piece that Goes on your control plate where your throttle cable hooks into you cannot buy those pieces you have to buy the whole control plate. Jim
thanks Jim- my throttle plate broke- plastic piece on it-- crap-- so i ordered a new one on amazon but are there any tricks to getting the throttle cable back on and spring? I know there are 3 screws to take out and a bunch of wires looks like ground wires to take off- mike
No tricks that I can think of just a lot of patience sometimes it’s hard to get the link in and the springs hooked up. Let me know how you’re doing. Jim
@@jimjackson9381 get the part later today- got the old one out and took pictures- thanks- let you know- used my lamp that i wear on my head - works great- wife suggested it-lol- i also bought a fuel shut off-
@@mikegorton691 Well let me know if you have any problems. Jim
Hi, could you post a link of what you ordered? Because our white plastic piece broke on our snapper riding mower and I am not sure where to order it from. Thank you.
Hey Jim. What is the name of part number of that plastic block the cable links into?
The part name is
cable connector
And the part number is
7034174
Hope it helps. Jim
@@jimjackson9381 you're so awesome thanks!
What is the part number for the bracket that he said you have to replace the whole bracket not just the little plastic piece. Having a hard time finding it, i have 17hp rear engine 33" cut snapper and the little plastic piece broke, and I remembered in the video he said you have to purchase the whole bracket. So if I can get a parts number for that bracket with the plastic piece that would be great.
How to replace clutch and brake cable on snapper sr1433 1995 model 33”cut
I looked on parts tree and could not find the throttle cable, can you help me with that part number. Thank you
I need your complete model number or I can’t look it up either. Jim
Sorry to bug u . I have a question about mines. It doesn't move when I put it in gear. I've notice when I let go of the brake pedal the brake itself stays applied. Need help thanks
The first thing I want you to check take your hubcaps off and check the bolts that go through your axle and wheel flange and make sure neither one of those are broken or missing. And let me know what you find. Jim
Thanks. The bolts r good
Can you stand it up and show me a picture of the brake and how it’s acting with the pedal up and with the pedal locked down. Jim
My local repair shop recently replaced my throttle cable and now the new throttle doesn't allow me to use the full range of the lever . When i slide it down to low speed the lever stops about a half inch before it gets to the end of the slot on the lever panel. Is this a problem that i should be concerned about and ask them to redo or not ?
A lot of them are that way it’s hard to get an original so it fits properly but watch your engine where your linkage is and move the lever back-and-forth and just make sure you’re getting full travel on the linkage to the carburetor. Jim
How to remove negative battery cable on a rear engine Snapper Mower
5/16 wrench I need to take a flashlight with me because I am not a mechanic. I’m just a farm boy my brothers were good but I am not thank you very much.
My snapper won't throttle up what could wrong
I would start by taking your throttle cable off of your control plate and out of the little white plastic block and see if it will move freely without the cable hooked to it and don’t have your engine running if it does move freely then your throttle cable is probably starting to rust and it needs to be oiled or replaced, if it doesn’t move try oiling it with some WD-40 and working it back-and-forth , let me know what you find out. Jim
Thanks got saying -5/16 than you -
What's the part number for that throttle cable? It's the EXACT one I need ! I have the 84877 301323BVE RER. OR also where I can look up parts for My RER mower. THANKS for the Video JIM !
I get all my parts from Parts Tree.Com. all you need is your model number and you can find anything you need. Jim
I looked on Parts Tree.Com. for that part number and I can’t find it that is something you’re going to have to call them and ask their number is on their homepage in the top right hand corner thanks Jim